MOUNTUP MU2005 Gas Spring Single Monitor Wall Mount

1. Introdução

This manual provides instructions for the installation, operation, and maintenance of your MOUNTUP MU2005 Gas Spring Single Monitor Wall Mount. This mount is designed to securely hold computer screens and televisions, offering adjustable positioning for an ergonomic viewing experience. Please read these instructions carefully before installation to ensure safe and correct usage.

2. Informações de segurança

AVISO: A instalação incorreta pode resultar em ferimentos graves e danos materiais. Se você não entender estas instruções ou tiver dúvidas sobre a segurança da instalação, entre em contato com um instalador qualificado.

• Do not install on drywall alone. This mount is designed for installation on wood studs, solid concrete walls, or brick walls.
• Certifique-se de que a superfície de montagem suporte com segurança o peso combinado do suporte e do monitor.
• Não exceda a capacidade máxima de peso de 26.5 kg (12 lbs).
• Use only the provided hardware. If any parts are missing or defective, contact MOUNTUP customer service.
• Mantenha crianças e animais de estimação afastados durante a instalação.
• Verifique periodicamente se a fixação está segura e se todos os parafusos estão apertados.

3. Conteúdo da embalagem

Verifique se todos os componentes estão presentes e sem danos antes de prosseguir com a instalação.

• Monitor Wall Mount Arm (MU2005)
• Placa VESA
• VESA Extension Kit (for larger VESA patterns)
• Acessórios de montagem (parafusos, buchas, arruelas)
• Hex Keys for Adjustment
• Manual de instruções

Image: Main components of the MOUNTUP MU2005 monitor wall mount, including the gas spring arm, VESA mounting plate, and VESA extension brackets.

4. Especificações

Image: Detailed diagram illustrating the mount's dimensions, VESA compatibility (75x75, 100x100, 100x200, 200x100, 200x200), weight capacity (4.4-26.5 lbs), and supported screen sizes (22-35 inches).

5. Configuração e instalação

Before beginning, ensure you have all necessary tools and that your wall type is compatible. This mount is suitable for wood studs, concrete walls, and brick walls. It is NOT for drywall alone.

5.1 Verificação de compatibilidade

Confirm your monitor meets the following criteria:

1. Tamanho do monitor: 22-35 polegadas
2. Peso do monitor: 4.4-26.5 libras
3. Padrão VESA: 75x75mm, 100x100mm, 100x200mm, 200x100mm, 200x200mm
4. Tipo de parede: Wood Stud, Brick Wall, or Concrete Wall

Image: A visual guide to checking monitor compatibility with the mount, covering screen size, weight, VESA pattern, and suitable wall types.

5.2 Etapas de instalação

1. Install the Arm to the Wall: Securely attach the wall plate of the monitor arm to a wood stud, concrete wall, or brick wall using the appropriate hardware. Ensure it is level and firmly anchored.


Image: Illustration of mounting the arm's wall plate to the wall.

2. Attach VESA Plate to Monitor Back: Fasten the VESA plate to the back of your monitor using the screws that fit your monitor's VESA holes. Use the VESA extension kit if your monitor requires a larger VESA pattern.


Image: Illustration of attaching the VESA plate to the monitor's rear.

3. Attach Monitor onto the Arm: Carefully slide the monitor (with the attached VESA plate) onto the arm's mounting head. Ensure it clicks into place securely.


Image: Illustration of sliding the monitor onto the arm's VESA head.

4. Adjust Gas Spring to Proper Tension: This is crucial for the arm to hold your monitor at the desired height. Refer to the 'Operating' section for detailed adjustment instructions.


Image: Illustration of adjusting the gas spring tension on the arm.

5.3 Gerenciamento de cabos

Route your cables through the integrated cable management channels on the arm to maintain a clean and organized workspace.

Image: The monitor arm demonstrating its full range of motion, including 360° rotation, 90°/-90° swivel, 90°/-45° tilt, and 11 inches of adjustable height.

6. Operando o braço do monitor

The MOUNTUP MU2005 offers extensive adjustability to achieve optimal viewângulos de visão e posicionamento ergonômico.

6.1 Gas Spring Adjustment (Monitor Height)

The gas spring allows for effortless height adjustment. If your monitor does not stay at the desired height, adjust the tension:

• Monitor raises up (too light): Turn the screw clockwise ("-" direction) to reduce tension.
• Monitor drops down (too heavy): Turn the screw counter-clockwise ("+" direction) to increase tension.

Observação: Hold the arm in a horizontal position during adjustment. Refer to the table below for approximate turns based on monitor weight.

Image: Comprehensive guide for adjusting gas spring tension and tilt angle, including a table correlating monitor weight with the number of turns for adjustment.

6.2 Tilt Angle Adjustment

If your monitor faces down or up unintentionally, adjust the tilt tension:

1. Loosen the tilting bolt (Turn to "-" direction).
2. Adjust the monitor to your desired angle.
3. Retighten the tilting bolt (Turn to "+" direction).

Image: Visual instructions for adjusting the gas spring tension and the monitor's tilt angle using a hex key.

6.3 Swivel and Rotation

• The arm can swivel 180° at the wall plate and 360° at the arm joint.
• The VESA plate allows for 180° swivel and 360° rotation, enabling easy switching between portrait and landscape orientations.

Image: The monitor arm demonstrating its full range of motion, including 360° rotation, 90°/-90° swivel, 90°/-45° tilt, and 11 inches of adjustable height.

7. Manutenção

A manutenção regular garante a longevidade e o funcionamento seguro do seu suporte de monitor.

• Limpeza: Limpe a montagem com um pano macio e seco.amp pano. Evite produtos de limpeza abrasivos.
• Verifique as conexões: Inspecione periodicamente todos os parafusos e porcas para garantir que estejam bem apertados. Reaperte-os, se necessário.
• Gas Spring Function: If the gas spring's performance changes over time, re-adjust the tension as described in the 'Operating' section.

8. Solução De Problemas

If you encounter issues with your MOUNTUP monitor arm, refer to the following common problems and solutions:

8.1 Arm Does Not Stay at Desired Height

• Problema: Monitor arm falls down.
• Solução: The gas spring tension is too low for the monitor's weight. Increase tension by turning the adjustment screw counter-clockwise ("+" direction).
• Problema: Monitor arm rises up.
• Solução: The gas spring tension is too high for the monitor's weight. Decrease tension by turning the adjustment screw clockwise ("-" direction).

Refer to the 'Gas Spring Adjustment' section for detailed instructions and the weight-to-turns table.

8.2 Monitor Tilts Down Unintentionally

• Problema: The monitor head cannot maintain its tilt angle.
• Solução: The tilting bolt is loose. Loosen the tilting bolt, adjust the monitor to the desired angle, and then retighten the tilting bolt firmly.

9. Garantia e Suporte

MOUNTUP provides a 3-year support for this product. If you have any questions regarding pre-purchase compatibility, installation, or require assistance with any issues, please do not hesitate to contact MOUNTUP customer service. Our team is available to provide friendly and helpful support.