Gioteck SC3 Wireless Pro Controller User Manual

Introdução

This manual provides detailed instructions for the setup, operation, and maintenance of your Gioteck SC3 Wireless Pro Controller. Designed for use with Nintendo Switch, PC, and mobile devices, this controller features programmable back buttons, customizable RGB lighting, and changeable magnetic thumb sticks for an enhanced gaming experience.

1. Configuração

1.1 Conteúdo da embalagem

• Gioteck SC3 Wireless Pro Controller
• Cabo de carregamento USB
• Additional Magnetic Thumb Sticks (if included)
• Manual do usuário (este documento)

1.2 Carregando o controlador

Before initial use, fully charge the controller. Connect the supplied USB charging cable to the controller's charging port and the other end to a USB power source (e.g., Nintendo Switch dock, PC USB port, or USB wall adapter).

• O indicador LED mostrará o status do carregamento.
• Uma carga completa normalmente leva de 2 a 3 horas.

Imagem: Parte inferior view of the Gioteck SC3 controller, highlighting the USB-C charging port located between the two textured grips.

1.3 Emparelhamento com o Nintendo Switch

1. No menu HOME do Nintendo Switch, selecione Controladores, então Alterar Pega/Ordem.
2. On the SC3 controller, press and hold the Botão de Emparelhamento (usually a small button on the top or back) for a few seconds until the LED indicators begin to flash rapidly.
3. Once the controller is recognized by the Switch, the player LED(s) on the controller will illuminate solid, indicating successful pairing.
4. Pressione o Um botão para confirmar.

Note: For subsequent uses, the controller should automatically reconnect to the last paired Switch console when powered on.

1.4 Connecting to PC/Mobile (Bluetooth)

1. Ensure Bluetooth is enabled on your PC or mobile device.
2. On the SC3 controller, press and hold the Botão de Emparelhamento for a few seconds until the LED indicators flash rapidly.
3. On your PC/mobile device, navigate to Bluetooth settings and search for new devices.
4. Select "Gioteck SC3" or similar from the list of available devices to pair.
5. The controller's LED will become solid upon successful connection.

1.5 Installing Magnetic Thumb Sticks

The SC3 controller features changeable magnetic thumb sticks. To replace them:

1. Gently pull the existing thumb stick straight up to remove it.
2. Align the desired magnetic thumb stick with the base and gently push it down until it snaps into place.

Imagem: Frente view of the Gioteck SC3 controller, showcasing the magnetic thumb sticks and button layout.

2. Instruções de operação

2.1 Esquema de Botões

The SC3 controller features a traditional button layout. Refer to the image below for button identification.

Imagem: Frente inclinada view of the Gioteck SC3 controller, displaying the full button layout including face buttons, D-pad, analog sticks, and shoulder buttons.

• Controles analógicos esquerdo/direito: Para controle de movimento e câmera.
• D-pad: Entrada direcional.
• Botões A/B/X/Y: Botões de ação.
• Botões L/R/ZL/ZR: Botões de ombro e gatilho.
• +/- Botões: Start/Select equivalents.
• Botão Home: Returns to the console's home menu.
• Botão de captura: Tira capturas de tela.

2.2 Botões traseiros programáveis

The SC3 controller includes programmable back buttons (M1, M2, M3, M4) for custom assignments.

Imagem: Traseira view of the Gioteck SC3 controller, clearly showing the four programmable back buttons (M1, M2, M3, M4) and textured grips.

Etapas de Programação:

1. Pressione e segure o Botão de programa (refer to diagram if available, usually a small button on the back) until the LED indicator flashes.
2. Pressione o Botão Voltar (M1, M2, M3, or M4) you wish to program. The LED will flash slowly.
3. Pressione o Botão de entrada (e.g., A, B, X, Y, L, R, ZL, ZR, D-pad direction) you want to assign to the back button.
4. Pressione o Botão de programa again to save the assignment. The LED will stop flashing.
5. Repeat for other back buttons as desired.

To clear a programmed button, follow steps 1-2, then press the Program Button again without pressing an input button.

2.3 Personalização da iluminação RGB

The controller features customizable RGB lighting. Specific instructions for changing colors or effects are typically found in the product's quick start guide or by pressing a dedicated button combination (e.g., Function + R3).

Consult the quick start guide included with your controller for precise button combinations to adjust RGB lighting.

2.4 Controles de Movimento

The SC3 controller supports motion controls, allowing for immersive gameplay in compatible Nintendo Switch titles. No special setup is usually required; motion controls activate automatically when supported by the game.

2.5 Audio Headset Jack

A 3.5mm audio headset jack is located on the controller for connecting compatible headsets. It includes dedicated mute and volume control buttons.

• Aumentar/diminuir volume: Ajuste a saída de áudio.
• Botão Mudo: Mute/unmute microphone input.

Imagem: Topo view of the Gioteck SC3 controller, highlighting the 3.5mm audio jack, volume controls, and mute button.

3. Manutenção

3.1 Limpeza

Para limpar o seu controle, use um pano macio e seco. Para sujeira mais difícil de remover, umedeça levemente o controle.ampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the controller's finish and internal components.

• Do not immerse the controller in water or any other liquid.
• Ensure all ports are dry before charging or connecting devices.

3.2 Armazenamento

Guarde o controle em local fresco e seco, longe da luz solar direta e de temperaturas extremas. Evite colocar objetos pesados ​​sobre o controle para evitar danos.

3.3 Cuidados com a bateria

The controller contains a rechargeable battery. To prolong battery life:

• Evite descarregar completamente a bateria com frequência.
• Charge the controller regularly, even if not in use for extended periods (e.g., once every 3-6 months).
• Do not expose the controller to temperatures above 60°C (140°F).

4. Solução De Problemas

4.1 O controlador não está conectando/emparelhando

• Verifique a bateria: Certifique-se de que o controle remoto esteja suficientemente carregado.
• Reparar: Follow the pairing instructions in Section 1.3 or 1.4.
• Interferência: Move closer to the console/device and away from potential sources of wireless interference (e.g., Wi-Fi routers, other Bluetooth devices).
• Reiniciar controlador: Locate a small reset button (often a pinhole) on the back of the controller. Use a paperclip to press and hold it for a few seconds. Then attempt to re-pair.
• Update Console/Device Software: Ensure your Nintendo Switch, PC, or mobile device's operating system is up to date.

4.2 Buttons/Sticks Not Responding

• Re-sync: Desconecte e reconecte o controlador.
• Limpar: Certifique-se de que não haja detritos presos ao redor dos botões ou das varetas.
• Test in another game/menu: Determine if the issue is specific to a game or system-wide.
• Reiniciar controlador: Execute uma reinicialização completa conforme descrito acima.

4.3 Motion Controls Not Working

• Compatibilidade do jogo: Verify that the game you are playing supports motion controls.
• Recalibrar: On Nintendo Switch, you can recalibrate motion controls in the system settings.
• Reiniciar controlador: Execute uma reinicialização forçada.

5. Especificações

6. Informações de garantia

The Gioteck SC3 Wireless Pro Controller comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included with your product or visit the official Gioteck website.

Guarde o comprovante de compra para fins de garantia.

7. Suporte ao cliente

If you encounter any issues or have questions not covered in this manual, please contact Gioteck customer support. Contact information can typically be found on the product packaging or the official Gioteck website.

Gioteck Official Website: www.gioteck.com