Manual do Usuário do Sensor de Porta/Janela de Segurança Residencial Sem Fio Ecolink WST-232

Introdução

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ecolink WST-232 Wireless Home Security Door Window Sensor. This device is designed to enhance the security of your home by detecting the opening and closing of doors and windows. It is compatible with Honeywell 5800 Wireless and 2GIG security systems.

Informações importantes de segurança

• Leia todas as instruções cuidadosamente antes da instalação e uso.
• Do not attempt to repair or modify the sensor. Refer all servicing to qualified personnel.
• Mantenha as pilhas fora do alcance de crianças. Descarte as pilhas usadas corretamente, de acordo com as normas locais.
• Ensure the sensor is installed in a location where it will not be exposed to extreme temperatures or moisture.

Conteúdo da embalagem

Verifique se todos os itens estão presentes na embalagem:

• Ecolink WST-232 Wireless Door/Window Sensor (Main Unit)
• Magnet (for contact detection)
• Acessórios de montagem (parafusos, fita adesiva)
• Interchangeable Brown Case
• Manual do usuário (este documento)

Produto acimaview

The Ecolink WST-232 is a compact wireless sensor designed for monitoring the open/closed status of doors and windows. It features an internal reed switch for standard magnetic contact detection and an external contact input for connecting wired devices.

Imagem: Ecolink WST-232 Wireless Door/Window Sensor showing the main unit and the external contact wires.

Componentes principais:

• Unidade de sensor principal: Contains the battery, wireless transmitter, and internal reed switch.
• Magnético: Triggers the internal reed switch when separated from the main unit.
• External Contact Input: Two wires (typically red and black) for connecting an external wired contact.
• Compartimento da bateria: Localizado na parte de trás da unidade principal.

Configuração e instalação

1. Instalação da bateria

1. Abra o sensor casing by gently prying it open from the side notch.
2. Insert the CR2032 lithium battery, ensuring the positive (+) side faces up.
3. Feche o sensor casing com segurança.

2. Enrolling the Sensor with Your Security Panel

The WST-232 sensor is compatible with Honeywell 5800 Wireless and 2GIG security systems. Refer to your security panel's manual for specific enrollment procedures. General steps are as follows:

1. Put your security panel into programming mode for adding new wireless zones.
2. Activate the sensor by separating the magnet from the main unit, or by connecting/disconnecting the external contact wires. This sends a signal to the panel.
3. Confirm the sensor's serial number is learned by the panel.
4. Assign the sensor to an appropriate zone type (e.g., "Entry/Exit," "Perimeter").
5. Exit programming mode on your panel.

3. Montagem do sensor

Choose a suitable location on your door or window frame. The sensor and magnet should be mounted within 0.5 inches (1.27 cm) of each other when the door/window is closed.

Imagem: Ecolink WST-232 sensor components including the main unit, magnet, and mounting screws.

Usando parafusos:

1. Position the main sensor unit on the stationary frame and the magnet on the moving part (door/window).
2. Marque os orifícios dos parafusos.
3. Faça furos piloto, se necessário.
4. Secure both the sensor and magnet with the provided screws.

Using Adhesive Tape (not recommended for long-term security):

1. Clean the mounting surfaces thoroughly.
2. Apply adhesive tape to the back of the sensor and magnet.
3. Press firmly onto the desired surfaces for at least 30 seconds.

4. External Contact Input

The WST-232 includes an external contact input for integrating other wired devices, such as recessed door contacts or pressure mats. Connect the two wires from your external device to the red and black wires of the WST-232 sensor. The sensor will transmit a signal when the external contact opens or closes.

Operando o sensor

Once installed and enrolled, the Ecolink WST-232 sensor operates automatically. When the door or window it is monitoring opens, separating the magnet from the main unit (or opening the external contact), the sensor will transmit a signal to your security panel. This signal indicates an "open" state. When the door or window closes, bringing the magnet back into proximity (or closing the external contact), the sensor transmits a "closed" state signal.

Your security panel will then react according to its programming (e.g., trigger an alarm if the system is armed, log the event).

Manutenção

Substituição da bateria

The sensor uses one CR2032 lithium battery. When the battery level is low, your security panel will typically display a low battery warning for the corresponding zone. To replace the battery:

1. Put your security panel into disarm or test mode to prevent false alarms.
2. Abra cuidadosamente o sensor casing.
3. Remova a bateria CR2032 antiga.
4. Insira uma nova bateria CR2032, certificando-se da polaridade correta (lado positivo para cima).
5. Feche o sensor casing com segurança.
6. Test the sensor to ensure it communicates with the panel.

Limpeza

Clean the sensor and magnet with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.

Solução de problemas

Especificações

• Modelo: WST-232
• Compatibilidade: Honeywell 5800 Wireless, 2GIG
• Dimensões: 3 x 1.7 x 1 polegadas (aproximadamente)
• Bateria: 1 x CR2032 Lithium Coin Cell
• Frequência de operação: 345 MHz
• Fabricante: Ecolink Intelligent Technology Inc
• Código UPC: 657479755391

Garantia e suporte técnico

For warranty information and technical assistance, please refer to the official Ecolink webou entre em contato diretamente com o suporte ao cliente. Guarde o comprovante de compra como prova de aquisição.

Ecolink Website: www.ecolink.com