Introdução
The Audiolab 7000A is an integrated amplifier designed to deliver high-fidelity audio performance. It combines pre-amplification, power amplification, and digital-to-analog conversion capabilities into a single, compact unit. This manual provides essential information for the safe and optimal use of your Audiolab 7000A.
Leia atentamente este manual antes de utilizar o aparelho e guarde-o para futuras consultas.
Informações de segurança
Observe sempre as seguintes precauções de segurança para evitar choque elétrico, incêndio ou danos ao aparelho:
- Não exponha este aparelho à chuva ou umidade.
- Não remova a tampa. Não há peças que possam ser reparadas pelo usuário no interior. A manutenção deve ser realizada por pessoal qualificado.
- Garanta uma ventilação adequada. Não obstrua as aberturas de ventilação.
- Desconecte o cabo de alimentação da tomada se o aparelho não for utilizado por um longo período.
- Não coloque o aparelho perto de fontes de calor ou sob luz solar direta.
- Utilize apenas a fonte de alimentação especificada para esta unidade.
Desembalagem e configuração
Desembale cuidadosamente o amplifier and check for any signs of damage. Retain the original packaging for future transport.
Colocação
Place the Audiolab 7000A on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure adequate space around the unit for proper ventilation.
Frente view of the Audiolab 7000A Integrated Ampamplificador, showcasing its clean silver finish, central display, and control knobs.
Um fimview image displaying both the silver and black versions of the Audiolab 7000A Integrated Amplifier, highlighting its design and key features.
Conexões
Antes de estabelecer qualquer conexão, certifique-se de que... ampO amplificador está desligado e desconectado da tomada.
Conexões de alto-falantes
Connect your loudspeakers to the speaker terminals on the rear panel. Ensure correct polarity (+ to + and – to –) for both channels. Use high-quality speaker cables for optimal performance.
Conexões de origem
The 7000A offers a variety of input options:
- Analog Inputs (AUX1, AUX2, AUX3, Phono): Use RCA cables to connect analog sources such as CD players, tuners, or a turntable (Phono input).
- Digital Inputs (Optical 1, Optical 2, Coaxial 1, Coaxial 2, USB): Connect digital sources like TVs, Blu-ray players, or computers using appropriate digital cables. The USB input supports high-resolution audio from a PC.
- ARCO HDMI: Conecte à porta HDMI ARC da sua TV para obter a funcionalidade de canal de retorno de áudio.
Conexão de energia
Once all audio connections are made, connect the supplied power cord to the AC inlet on the rear panel and then to a suitable wall outlet.
Rear panel of the Audiolab 7000A, illustrating the comprehensive array of analog and digital input/output connections, including speaker terminals, RCA inputs, optical, coaxial, USB, and HDMI ARC ports.
Operação
Ligar/Desligar
Press the power button on the front panel or remote control to turn the unit on or off. The display will illuminate upon power-up.
Seleção de entrada
Rotate the 'SEL' (Selector) knob on the front panel or use the input selection buttons on the remote to cycle through available audio inputs. The selected input will be shown on the display.
O amplifier's display showing the "PC USB" input selected, along with MQA and sample informações de taxa.
O amplifier's display showing the "Phono" input selected, indicated by a turntable icon.
Controle de volume
Adjust the volume using the 'VOL' (Volume) knob on the front panel or the volume buttons on the remote control.
Seleção de modo
The 'MODE' knob allows you to select different operational modes or settings, such as tone controls or display options, depending on the amplifier's firmware.
Controle remoto
The supplied remote control provides full functionality for operating the Audiolab 7000A from a distance. Ensure batteries are correctly inserted.
O Audiolab 7000A amplifier shown with its dedicated remote control, emphasizing ease of use.
Manutenção
To maintain the performance and appearance of your Audiolab 7000A, follow these guidelines:
- Limpeza: Use a soft, dry, lint-free cloth to wipe the surfaces. Do not use abrasive cleaners, waxes, or solvents.
- Ventilação: Certifique-se de que as aberturas de ventilação estejam livres de poeira e detritos.
- Poder: Disconnect from power before cleaning or if unused for extended periods.
Solução de problemas
If you experience issues with your Audiolab 7000A, consult the following table before seeking professional service:
| Problema | Possível causa | Solução |
|---|---|---|
| Sem energia | Power cord not connected; Power outlet faulty; Unit in standby mode. | Check power cord connection; Try a different outlet; Press power button. |
| Sem som | Incorrect input selected; Speaker cables loose/incorrectly connected; Volume too low; Mute activated. | Select correct input; Check speaker connections and polarity; Increase volume; Deactivate mute. |
| Som distorcido | Source signal too strong/weak; Speaker impedance mismatch; Damaged cables. | Check source output level; Ensure speakers match amplifier impedance; Inspect and replace cables if necessary. |
| Controle remoto não funciona | Batteries depleted/incorrectly inserted; Obstruction between remote and unit. | Replace batteries; Ensure clear line of sight to the unit's IR receiver. |
Especificações
The following are key specifications for the Audiolab 7000A Integrated Ampmais vital:
- Dimensões da embalagem: 20.67 x 19.25 x 6.57 polegadas
- Peso do item: 23.8 libras
- ASIN: B0BTT5S6MF
- Fabricante: Laboratório de áudio
- Data da primeira disponibilidade: 7 de março de 2023
For detailed technical specifications, please refer to the official Audiolab product page or contact customer support.
Garantia e Suporte
Audiolab products are manufactured to the highest standards and are designed for reliable performance. This product is covered by a limited warranty. Please refer to the warranty card included with your product or visit the official Audiolab website para obter termos e condições detalhados da garantia.
For technical support, service, or inquiries, please contact your authorized Audiolab dealer or visit the Audiolab support section on their official website. When contacting support, please have your product model (7000A) and serial number ready.
Você pode encontrar mais informações e suporte em Audiolab Store on Amazon.
