8Bitdo Retro Arcade Fight Stick Instruction Manual

1. Introdução

This manual provides detailed instructions for the 8Bitdo Retro Arcade Fight Stick. It covers setup, operation, features, and maintenance to ensure optimal performance and longevity of your device. The arcade stick is designed for use with Nintendo Switch, Nintendo Switch 2, and Windows PC systems, offering versatile connectivity options.

Figura 1.1: Angulado view of the 8Bitdo Retro Arcade Fight Stick, showcasing the joystick, main buttons, and control panel.

2. Características

• 8BitDo Ultimate Software: Customize button mapping and create macros with any button combination. Includes two dedicated macro buttons (P1/P2). Create and switch between controller profiles.
• Layout de botões dinâmico: The arcade stick's visual button layout changes instantly when switching between Switch and PC (X-Input) modes.
• Múltiplas opções de conectividade: Supports Bluetooth, 2.4G wireless, and wired USB-C connections. The 2.4G receiver is stored in a hidden compartment.
• Compatibilidade: Fully compatible with Nintendo Switch, Nintendo Switch 2, and Windows operating systems.
• Ultra-Moddable Design: Allows for swapping out 30mm/24mm arcade buttons. Features a universal joystick mounting plate, supporting various arcade sticks like Sanwa JLF.
• Vida útil da bateria estendida: Provides approximately 40 hours of playtime via 2.4G connection and 30 hours via Bluetooth, with a 4-hour charging time.
• Funções adicionais: Includes Button Swap Function, Control Stick switch (L-Stick/D-pad/R-Stick), Turbo Functionality, and support for Firmware Updates.

Figure 2.1: Illustration of the dynamic button layout, showing how button labels adapt between Switch and PC modes.

Figure 2.2: Screenshot of the 8Bitdo Ultimate Software, demonstrating button remapping and macro creation for P1 and P2 buttons.

3. Configuração

3.1 Ligar e desligar

To power on the arcade stick, press the Home button. To power off, hold the Home button for 5 seconds.

3.2 Conexão com dispositivos

The 8Bitdo Retro Arcade Fight Stick offers three connection methods: Bluetooth, 2.4G Wireless, and Wired USB-C.

3.2.1 Conexão Bluetooth

1. Set the mode switch on the arcade stick to 'S' for Switch or 'X' for PC.
2. Set the connection switch to 'BT' (Bluetooth).
3. Press the Pair button (green button with Wi-Fi symbol) for 3 seconds until the indicator lights begin to cycle.
4. On your device (Switch or PC), navigate to Bluetooth settings and select '8Bitdo Arcade Stick' to pair.

Figure 3.1: Close-up of the BT/2.4G connection switch on the control panel.

3.2.2 Conexão sem fio 2.4G

1. Locate the 2.4G wireless receiver in the hidden compartment on the back of the arcade stick.
2. Plug the 2.4G receiver into an available USB port on your Switch dock or PC.
3. Set the mode switch on the arcade stick to 'S' for Switch or 'X' for PC.
4. Set the connection switch to '2.4G'.
5. The arcade stick should automatically connect to the receiver.

Figure 3.2: The 2.4G wireless receiver being removed from its storage compartment.

3.2.3 Conexão USB-C com fio

1. Connect the USB-C cable to the port on the arcade stick.
2. Connect the other end of the USB-C cable to an available USB port on your Switch dock or PC.
3. The arcade stick will automatically switch to wired mode.

Figure 3.3: USB-C cable connected to the arcade stick for wired play or charging.

3.3 Charging the Arcade Stick

Connect the USB-C cable to the arcade stick and a power source (e.g., USB wall adapter, PC USB port). The indicator lights will show charging status and turn off when fully charged.

4. Instruções de operação

4.1 Layout de Controle

Figura 4.1: Visão de cima para baixo view illustrating the full control layout, including joystick, action buttons, and system controls.

• joystick: 8-way directional control.
• Botões de ação: Eight primary action buttons (red).
• Macro Buttons (P1, P2): Two dedicated buttons for custom macros.
• Seletor de modo (S/OFF/X): Selects between Switch mode ('S') and PC X-Input mode ('X'). 'OFF' powers down the device.
• Interruptor do joystick (LS/DP/RS): Toggles the joystick function between Left Stick, D-Pad, and Right Stick.
• Home/Turbo Button: Powers on/off the device and activates/deactivates Turbo function.
• Botão Estrela: Often used for special functions or as a customizable button.
• Botões Selecionar/Iniciar: Botões de controle de jogo padrão.

Figura 4.2: Close view of the P1 and P2 macro buttons, located on the top right of the arcade stick.

4.2 Using Macro Buttons (P1/P2)

The P1 and P2 buttons can be programmed using the 8Bitdo Ultimate Software to execute complex button sequences or single button presses. Refer to the software's instructions for detailed programming steps.

4.3 Turbo Functionality

To activate Turbo for a specific button, hold the desired button and press the Home/Turbo button simultaneously. To deactivate, repeat the process.

4.4 Layout de Botões Dinâmicos

When switching between Switch and PC (X-Input) modes using the mode switch, the button labels on the arcade stick will dynamically change to reflect the current mapping for the selected platform.

5. Manutenção

5.1 Limpeza

Use a soft, dry cloth to clean the surface of the arcade stick. Avoid using abrasive cleaners or solvents, as they may damage the finish.

5.2 Moddability

The 8Bitdo Retro Arcade Fight Stick is designed for easy modification. Users can swap out 30mm/24mm arcade buttons and utilize the universal joystick mounting plate to install various arcade sticks, such as Sanwa JLF models. Exercise caution and consult relevant guides if performing modifications.

Figura 5.1: interno view of the arcade stick, highlighting the wiring and components that can be modified or replaced.

5.3 atualizações de firmware

Verifique periodicamente o site oficial da 8Bitdo. website for firmware updates. Updates can improve performance, add new features, or fix bugs. Follow the instructions provided with the firmware update package carefully.

6. Solução De Problemas

• Dispositivo não conecta: Ensure the mode switch is set correctly (S for Switch, X for PC) and the connection switch is set to the desired method (BT or 2.4G). For 2.4G, ensure the receiver is properly inserted. For Bluetooth, ensure the device is in pairing mode and discoverable.
• Buttons or joystick unresponsive: Check for a low battery. Try connecting via USB-C cable to rule out wireless interference. If modded, ensure all connections are secure.
• Atraso de entrada: For optimal performance, especially in competitive gaming, a wired USB-C connection is recommended. Ensure your device's drivers are up to date.
• Firmware update issues: Follow the official 8Bitdo firmware update guide precisely. Ensure the device is fully charged and connected directly via USB-C during the update process.

7. Especificações

8. Vídeo oficial do produto

9. Garantia e Suporte

For warranty information, technical support, or further assistance, please visit the official 8Bitdo webou entre em contato com o serviço de atendimento ao cliente. Guarde o comprovante de compra para eventuais solicitações de garantia.

8Bitdo oficial Website: www.8bitdo.com