BLNAN Motion Sensor LED Ceiling Light Instruction Manual

Introdução

Thank you for choosing the BLNAN Motion Sensor LED Ceiling Light. This 18W, 1800LM, 8.7-inch wired flush mount fixture features a radar motion sensor and remote control for versatile lighting in various indoor and outdoor settings. This manual provides important information for safe installation, operation, and maintenance of your new light fixture.

Informações de segurança

Leia atentamente todas as instruções antes da instalação e utilização. Guarde este manual para futuras consultas.

Segurança elétrica: Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture. Consult a qualified electrician if you are unsure about wiring.
Volumetage: This fixture operates on 120V AC. Do not attempt to connect it to any other voltage.
Local de instalação: Ensure the mounting surface can support the weight of the fixture. This light is suitable for damp locations (IP54 waterproof rating), including bathrooms and showers.
Aquecer: Do not touch the fixture immediately after operation as it may be hot.
Interferência: The 5.8G radar motion sensor can be affected by 5G signals. Install the light at least 3 meters away from 5G signal sources to avoid interference. If installing multiple radar sensing lights, ensure they are more than 3 meters apart to prevent mutual interference.

O que está na caixa

Verifique se todos os componentes estão presentes antes de iniciar a instalação.

Motion Detector Ceiling Light (2 units)
Controle remoto
Acessórios de montagem (parafusos, conectores de fio)
Manual de Instruções (este documento)

Contents of the BLNAN Motion Sensor LED Ceiling Light package, showing two ceiling lights, a remote control, mounting hardware, and an instruction manual. — Image: Package contents including two ceiling lights, remote, and installation accessories.

Instruções de instalação

This LED flush mount ceiling lamp requires hardwired installation. It operates with 120V AC. It can be mounted to the ceiling or wall.

Desligue a energia: Antes de começar, certifique-se de que a alimentação elétrica da área de instalação esteja desligada no disjuntor.
Preparar a superfície de montagem: O baixo profissionalfile design is suitable for mounting onto a junction box with a size between 2.75 inches and 3.54 inches.
Conectar a fiação: Connect the fixture's wires to the corresponding household wires (Live, Neutral, Ground) using the provided wire nuts. Ensure all connections are secure.
Montagem do dispositivo: Secure the fixture to the junction box using the provided screws. Ensure the fixture is flush against the mounting surface.
Restaurar energia: Após a luminária estar devidamente instalada e conectada, restabeleça a energia no disjuntor.

Diagram showing the dimensions and wiring connections for the BLNAN Motion Sensor LED Ceiling Light, indicating Live, Neutral, and Ground wires, and junction box compatibility. — Image: Wiring and dimensions for hardwired installation.

Image showing the BLNAN ceiling light installed in various indoor locations like a bathroom, closet, and laundry room, highlighting its waterproof feature. — Imagem: Example installations in various rooms.

Instruções de operação

Your BLNAN ceiling light features a radar motion sensor, light sensor, and remote control for customizable operation.

Funções do controle remoto

The included remote control allows you to adjust various settings:

Faixa de detecção: Adjust the motion detection range to 6.5 ft (25%), 13.1 ft (50%), or 19.6 ft (100%).
Sensor de luz: Set the ambient light threshold for activation (15 lux, 50 lux) or disable it. When disabled, the light will activate based on motion regardless of ambient light.
Tempo de espera: Configure how long the light stays on after motion is no longer detected (5 seconds, 30 seconds, 1 minute, 5 minutes).
LIGADO/DESLIGADO: Ligue ou desligue a luz manualmente.
Restabelecer: Resets settings to default (blue buttons on the remote).

Image showing a person in a doorway and a remote control with various buttons for adjusting sensor settings like detection range, light sensor, and hold time. — Image: Remote control and sensor setting options.

Modos disponíveis

You can customize the light's behavior using the remote control:

Modo de luz constante: Turn the light to "ON" using the remote. The LED light will remain on continuously, functioning as a standard 4000K white ceiling light.
Modo ativado por movimento: The light turns on when motion is detected and turns off after the set hold time when no motion is present. The light sensor is disabled in this mode.
Motion Activated with Light Sensor Mode: The light turns on when motion is detected, but only if the ambient light level is below the set lux threshold (e.g., 15 lux or 50 lux). It turns off after the set hold time when no motion is present and ambient light is sufficient. Note: The light automatically turns off during the day if the light sensor is enabled and sufficient daylight is present.
Modo de reinicialização: Retorna todas as configurações aos padrões de fábrica.

Diagram illustrating the motion sensor's 360-degree detection and 160-degree sensing angle, with a person walking and the light detecting motion. — Image: Motion detection range and sensing angle.

Image showing the BLNAN ceiling light detecting motion through walls using microwave technology, with a 360-degree sensor angle. — Image: Intelligent Radar Sensor capabilities, sensing through thin walls, doors, and windows.

Manutenção

To ensure optimal performance and longevity of your BLNAN LED Ceiling Light, follow these maintenance guidelines:

Limpeza: Desligue a energia antes de limpar. Limpe a luminária com um pano macio, seco ou levemente úmido.amp pano. Não use produtos de limpeza abrasivos ou solventes.
Substituição de lâmpada: The LED light source is integrated and non-removable. Do not attempt to replace the LEDs.
Inspeção: Periodically check the wiring and mounting for any signs of damage or loosening.

Solução de problemas

Problema	Possível causa	Solução
A luz não acende.	No power; incorrect wiring; light sensor detects too much ambient light; motion sensor disabled.	Check circuit breaker. Verify wiring connections. Adjust light sensor sensitivity or disable it via remote. Ensure motion sensor is enabled.
A luz permanece acesa constantemente.	Set to "Constant Light Mode"; continuous motion detected; hold time set too long.	Switch to motion-activated mode using the remote. Ensure no continuous motion is within detection range. Reduce hold time setting.
Motion sensor is inconsistent or too sensitive.	Incorrect detection range setting; interference from 5G signals or other radar lights; small moving objects (pets) triggering sensor.	Adjust the detection range via remote. Ensure light is at least 3 meters from 5G sources or other radar lights. Consider placement to avoid small object detection.
A luz pisca.	Unstable power supply; loose wiring connection.	Check power supply stability. Verify all wiring connections are secure.

Especificações

Recurso	Detalhe
Marca	BLNAN
Número do modelo	LS-CL-C18W-M-S
Poder	18 W
Brilho	1800 Lúmens
Temperatura de cor	4000K (Branco)
Volumetage	120 V CA
Dimensões	8.7"C x 8.7"L x 1.88"A (22 cm x 22 cm x 4.8 cm)
Material	Plástico à prova de fogo
Nível de resistência à água	IP54 (à prova d'água)
Tipo de sensor	Radar Microwave Motion Sensor + Light Sensor
Método de controle	Controle remoto
IRC (Índice de Reprodução de Cor)	90
Vida útil	Mais de 30,000 horas
Tipo de instalação	Instalação embutida (no teto ou na parede)
Junction Box Compatibility	2.75" - 3.54"

Garantia e Suporte

This BLNAN product comes with a Limited Warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact BLNAN customer service through the retailer where the product was purchased or visit the official BLNAN website.

Fabricante: BLNAN

	Manual do usuário da luminária de teto LED com sensor de movimento BLNAN Manual do usuário completo para a luminária de teto LED com sensor de movimento BLNAN (LS-CL-G18W-MS), detalhando especificações do produto, instalação, modos e precauções.
	Manual do usuário da luminária de teto LED BLNAN - LS-CL-G18W-Dim Manual do usuário da Luminária de Teto LED BLNAN LS-CL-G18W-Dim. Seus recursos incluem design ultrafino, seleção de 3 cores (3000K/4000K/5000K), economia de energia e fácil instalação. Inclui especificações e guia de instalação.
	BLNAN LS-CL-G180-CHG Rechargeable Motion Sensor LED Light User Manual User manual for the BLNAN LS-CL-G180-CHG rechargeable motion sensor LED light. Features include 3 color temperatures, 4 working modes, motion and light sensing, and a 7000mAh battery, with detailed installation and safety instructions.
	BLNAN Dimmable LED Ceiling Light User Manual User manual for the BLNAN Dimmable LED Ceiling Light (Model LS-CL-K24W-Dim), covering introduction, specifications, remote control operation, installation steps, and precautions.
	Manual do usuário da luminária de teto BLNAN RGB com controle remoto Manual do usuário para a luminária de teto BLNAN RGB com controle remoto (modelo: LS-CL-G3-24W-Dim-WYRGB), detalhando recursos, especificações, instalação, operação e precauções.
	Manual do usuário da luminária de teto LED dimerizável BLNAN CL-G36W-DIM-WY Manual do usuário completo para a luminária de teto LED dimerizável BLNAN CL-G36W-DIM-WY. Encontre especificações detalhadas, instruções de operação do controle remoto, guia de instalação passo a passo e precauções de segurança essenciais para esta luminária de embutir moderna.

BLNAN LS-CL-C18W-M-S