Waveshare EM060K-GL

Waveshare Quectel EM060K-GL Module User Manual

Model: EM060K-GL | Brand: Waveshare

1. Introdução

The Waveshare Quectel EM060K-GL is an advanced LTE-A Cat 6 module designed with an M.2 form factor. It offers robust global multi-band GNSS positioning capabilities and supports DL 2 Carrier Aggregation and 64QAM for enhanced data rates. This module provides worldwide LTE-A and UMTS/HSPA+ coverage, featuring a low power mode for energy efficiency. Its integrated multi-constellation GNSS receiver ensures fast and accurate positioning in diverse environments, while MIMO technology enhances data rate and link reliability in modern wireless communication systems.

Quectel EM060K-GL Module overview

Figura 1: Overview of the Quectel EM060K-GL Module, highlighting its branding and model number.

2. Principais características

Features at a glance for EM060K-GL module

Figure 2: Visual representation of the EM060K-GL module's key features and capabilities.

  • LTE-A Cat 6 Module: Utilizes an M.2 form factor for compact integration.
  • Agregação de operadoras: Supports DL 2 Carrier Aggregation and 64QAM for improved data throughput.
  • Cobertura global: Provides worldwide LTE-A and UMTS/HSPA+ network coverage.
  • Modo de baixo consumo: Designed for power efficiency, reducing energy consumption.
  • GNSS integrado: Features a multi-constellation GNSS receiver for precise and rapid positioning.
  • Tecnologia MIMO: Incorporates MIMO for enhanced data rates and link reliability in wireless communications.

3. Configuração e instalação

This section outlines the general steps for installing the EM060K-GL M.2 module. Always refer to the host device's manual for specific installation instructions.

  1. Prepare the Host Device: Ensure the host device (e.g., laptop, router, industrial PC) is powered off and disconnected from any power source.
  2. Localize o slot M.2: Identify the available M.2 slot on your host device's motherboard. The EM060K-GL module is compatible with M.2 Key B slots.
  3. Insira o módulo: Gently insert the EM060K-GL module into the M.2 slot at a 30-degree angle. Apply even pressure until the module is fully seated.
  4. Proteja o módulo: Press the module down and secure it with the provided screw (usually included with the host device or module accessory kit) to hold it in place.
  5. Conecte as antenas (se aplicável): If your host device and module require external antennas for LTE/GNSS, carefully connect them to the appropriate connectors on the module.
  6. Feche o dispositivo: Reassemble your host device, ensuring all covers are properly secured.
  7. Power On and Install Drivers: Power on the host device. You may need to install specific drivers for the Quectel EM060K-GL module. These drivers are typically available from the Waveshare or Quectel official websites.
Voltar view of EM060K-GL M.2 module

Figura 3: Traseira view of the EM060K-GL module, showing the M.2 connector pins and mounting notch.

4. Instruções de operação

Once the EM060K-GL module is installed and drivers are in place, follow these general steps for operation:

  1. Driver Verification: Confirm that the necessary drivers are correctly installed and the module is recognized by the operating system. Check Device Manager on Windows or use lsusb/lspci commands on Linux.
  2. Inserção do cartão SIM: If using cellular connectivity, ensure a valid and activated SIM card is inserted into the host device's SIM card slot (if available and connected to the module).
  3. Configuração de rede: Configure your network settings. This typically involves selecting the cellular network, setting up an Access Point Name (APN), and enabling mobile data. Refer to your operating system's network settings or your router's interface.
  4. GNSS Functionality: For GNSS positioning, ensure the module has a clear view of the sky (if external antenna is used) and that GNSS services are enabled in your application or operating system.
  5. Monitoramento: Use diagnostic tools or software provided by Quectel or your host device manufacturer to monitor signal strength, data usage, and GNSS status.

5. Manutenção

Proper maintenance ensures the longevity and optimal performance of your EM060K-GL module.

  • Mantenha seco: Protect the module from moisture and liquids. Water damage can lead to malfunction.
  • Limpe com cuidado: If cleaning is necessary, use a soft, dry cloth. Avoid harsh chemicals or abrasive materials. Ensure the device is powered off before cleaning.
  • Evite descarga estática: When handling the module outside of its host device, always use anti-static precautions (e.g., anti-static wrist strap) to prevent damage from electrostatic discharge.
  • Controle de temperatura: Operate the module within its specified temperature ranges to prevent overheating or performance degradation.
  • Atualizações de firmware: Periodically check the Waveshare or Quectel website for firmware updates. Applying updates can improve performance, add features, or fix bugs.

6. Solução De Problemas

If you encounter issues with your EM060K-GL module, consider the following troubleshooting steps:

  • Módulo não detectado:
    • Ensure the module is correctly seated in the M.2 slot.
    • Verify that the host device's BIOS/UEFI settings recognize the M.2 slot.
    • Check if the necessary drivers are installed.
  • Sem conexão de rede:
    • Confirm the SIM card is properly inserted and activated.
    • Check APN settings and network configuration in your operating system or router.
    • Ensure antennas are securely connected (if applicable) and have a clear signal path.
    • Verify that your cellular plan is active and has data allowance.
  • Intensidade do sinal fraca:
    • Relocate the host device to an area with better cellular coverage.
    • Ensure external antennas (if used) are positioned optimally and are not obstructed.
    • Check antenna connections for looseness or damage.
  • GNSS Not Functioning:
    • Certifique-se de que o dispositivo tenha uma clara view do céu para recepção de satélite.
    • Verify that GNSS services are enabled in your application or operating system.
    • Check for any physical obstructions or interference sources.
  • Superaquecimento do módulo:
    • Ensure adequate airflow around the module and host device.
    • Verify that the module is operating within its specified temperature range.
    • Reduce workload if possible.

If these steps do not resolve the issue, please contact Waveshare technical support for further assistance.

7. Especificações

Detailed technical specifications for the Waveshare Quectel EM060K-GL module.

Detailed specifications table for EM060K-GL module

Figure 4: Comprehensive table detailing the technical specifications of the EM060K-GL module, including frequency bands and data rates.

EM060K-GL Module Specifications
RecursoDetalhe
MarcaCompartilhamento de ondas
Número do modeloEM060K-GL
Fator de formaM.2
Tecnologia de ConectividadeUSB
Categoria LTECat 6 (LTE-A)
Agregação de operadorasDL 2CA, 64QAM
Suporte GNSSIntegrated multi-constellation (GPS, GLONASS, BDS, Galileo)
Temperatura de operação-30 °C ~ +70 °C
Extension Temperature-40 °C ~ +85 °C
Dimensões42.0 x 30.0 x 2.3 mm
Fonte de energia3.135V ~ 4.4V, typical 3.7V
Consumo de energia em marcha lenta16.57mA (típico)
Consumo de energia de desligamento62 µA (typical)
Dispositivos compatíveisLaptop, Router
Dimensions of the EM060K-GL module

Figure 5: Physical dimensions of the EM060K-GL module in millimeters.

8. Cenários de aplicação

The EM060K-GL module is designed for a wide range of industrial and commercial applications requiring reliable LTE-A connectivity and GNSS positioning.

Various application scenarios for EM060K-GL module

Figura 6: Examples of environments and devices where the EM060K-GL module can be utilized, including industrial routers, laptops, and digital signage.

  • Industrial Routers: Providing robust cellular connectivity for remote monitoring and control.
  • Home Gateways: Enabling high-speed internet access in residential settings.
  • Set Top Boxes: Integrating cellular data for smart TV and media applications.
  • Industrial Laptops & PDAs: Offering mobile connectivity for field operations and data collection.
  • Rugged Industrial Tablet PCs: Ensuring reliable communication in harsh environments.
  • Sinalização digital: Providing remote content updates and management for advertising displays.

9. Informações de garantia

Waveshare products typically come with a standard limited warranty against defects in materials and workmanship. The specific duration and terms of the warranty may vary by region and product. Please retain your proof of purchase for warranty claims.

For detailed warranty information, please refer to the official Waveshare website or contact their customer service directly. Unauthorized modifications or improper use of the module may void the warranty.

10. Suporte Técnico

For technical assistance, driver downloads, firmware updates, or any inquiries regarding the EM060K-GL module, please visit the official Waveshare support resources:

  • Oficial Website: www.waveshare.com
  • Product Wiki/Documentation: Procurar "EM060K-GL" on the Waveshare Wiki for detailed documentation and resources.
  • Entre em contato com o suporte: Refer to the "Contact Us" section on the Waveshare website for email, phone, or forum support options.

When contacting support, please have your product model number (EM060K-GL) and a detailed description of your issue ready.

Documentos relacionados - EM060K-GL

Préview Guia do usuário do driver Linux Waveshare RG500U-CN e RM500U-CN
Um guia completo para integrar os módulos RG500U-CN e RM500U-CN 5G da Waveshare com sistemas Linux, abrangendo configuração de driver de placa de rede e USB para serial, testes de comando AT e solução de problemas.
Préview Manual do usuário e guia do Waveshare SX1262 LoRaWAN/GNSS HAT
Um guia completo para o Waveshare SX1262 LoRaWAN/GNSS HAT, abordando seus recursos, parâmetros técnicos, conexão de hardware, definição de pinagem, configuração de software, conceitos de LoRaWAN e integração com a The Things Network (TTN).
Préview Manual do usuário do módulo LCD Waveshare de 2.4 polegadas
Um guia completo para o módulo de display LCD TFT Waveshare de 2.4 polegadas, detalhando seus recursos, especificações e uso com Raspberry Pi, STM32 e Arduino. Saiba mais sobre a interface SPI, o controlador IL9341, as conexões de hardware e o software.ampdicas para integrar esta tela com resolução de 240x320 em seus projetos.
Préview Manual do usuário do módulo OLED de 0.91 polegadas - Waveshare
Manual do usuário para o módulo OLED Waveshare de 0.91 polegadas (128x32 pixels) com controlador SSD1306. Abrange mais deview, recursos, pinagem, comunicação I2C e código de demonstração para STM32, Raspberry Pi (BCM2835, WiringPi, Python) e Arduino.
Préview Manual do Usuário do Módulo de Relé Industrial de 8 Canais Waveshare para Raspberry Pi Pico
Manual do usuário do módulo de relé industrial de 8 canais Waveshare para Raspberry Pi Pico (Pico-Relay-B). Detalhes sobre recursos, compatibilidade, gabinete e pinagem para aplicações de controle industrial.
Préview Pico-Relay-B: Guia do Usuário do Módulo de Relé de 8 Canais
Guia do usuário para o Waveshare Pico-Relay-B, um módulo de relé industrial de 8 canais para Raspberry Pi Pico. Aprenda sobre seus recursos, especificações, configuração e programação com instruções detalhadas e exemplos.amples.