LEDONE 8FT LED Vapor Tight Light Instruction Manual

1. Introdução

This manual provides detailed instructions for the safe installation, operation, and maintenance of your LEDONE 8FT LED Vapor Tight Light. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for demanding environments requiring high resistance to water, dust, and corrosion, such as parking garages, car washes, cold storage, and industrial facilities.

2. Informações de segurança

AVISO: Risco de choque elétrico. Desligue a energia antes da instalação ou manutenção.

• Installation must be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and local codes.
• Garantir o fornecimento voltage is compatible with the fixture's requirements (120-277Vac).
• Não manuseie luminárias energizadas com as mãos molhadas ou enquanto estiver em pé sobre superfícies molhadas ou secas.amp superfícies.
• Não tente modificar ou desmontar o dispositivo. Não há peças que possam ser reparadas pelo usuário em seu interior.
• Utilize equipamento de proteção individual (EPI) adequado durante a instalação.
• Certifique-se de que a luminária esteja fixada com segurança para evitar quedas.

3. Conteúdo da embalagem

Verifique se todos os componentes estão presentes e sem danos antes de prosseguir com a instalação.

• LEDONE 8FT LED Vapor Tight Light Fixture
• Acessórios de montagem (clips, parafusos, buchas)
• Manual de Instruções (este documento)

4. Configuração e instalação

4.1. Pré-instalação

1. Desligue a alimentação: Locate the circuit breaker or fuse box and turn off the power supply to the installation area. Verify power is off using a voltage testador.
2. Descompacte: Retire cuidadosamente a luminária da embalagem. Inspecione-a para verificar se há danos causados ​​pelo transporte.
3. Selecione Wattage and Color Temperature (CCT): Before mounting, adjust the wattage and CCT switches located on the fixture. These switches allow you to select between 60W, 80W, or 100W and 3500K, 4000K, or 5000K. Make your selection based on your lighting requirements.

Image: Product dimensions and location of wattage/CCT selection switches.

4.2. Montagem do acessório

The fixture is designed for surface mounting. Use the provided mounting clips and hardware.

1. Mark the desired mounting locations on the ceiling or wall. Ensure the marks are level and spaced appropriately for the fixture's length.
2. Faça furos-guia nos locais marcados. Insira buchas de fixação se a instalação for em drywall ou alvenaria.
3. Secure the mounting clips to the surface using the provided screws.
4. Snap the LED vapor tight fixture into the mounted clips, ensuring it is firmly seated.

Imagem: Example of surface mounting in a facility.

Image: Detail of the linkable design feature.

4.3. Fiação elétrica

This fixture supports 0-10V dimming. Follow the wiring diagram below and local electrical codes.

• Conecte o Preto fio da luminária para o Linha (L) wire from the power supply.
• Conecte o Branco fio da luminária para o Neutro (N) wire from the power supply.
• Conecte o Verde fio da luminária para o Terrestre (GND) wire from the power supply.
• Para dimerização de 0-10V: Conecte o Roxo fio da luminária para o Dim + wire from the 0-10V dimmer. Connect the Rosa/Cinza fio da luminária para o Dim- wire from the 0-10V dimmer.
• Ensure all connections are secure using appropriate wire connectors.

Note: If 0-10V dimming is not used, cap the purple and pink/gray wires individually with wire nuts.

5. Instruções de operação

1. Ligar: Once installation and wiring are complete, restore power to the circuit at the breaker or fuse box. The fixture should illuminate.
2. Escurecimento: If connected to a compatible 0-10V dimmer, adjust the dimmer control to achieve the desired light output level.
3. O quetage and CCT Adjustment: O quetage and CCT are set via internal switches during installation. These are not typically adjusted during normal operation. If changes are needed, disconnect power before accessing the switches.

6. Manutenção

The LEDONE Vapor Tight Light is designed for long-term, low-maintenance operation. Regular cleaning can help maintain optimal light output.

• Limpeza: Desligue a energia antes de limpar. Use um pano macio e seco.amp cloth with a mild, non-abrasive cleaner to wipe the exterior of the fixture. Do not use harsh chemicals or abrasive pads, as these can damage the finish or lens.
• Inspeção: Periodically inspect the fixture and mounting hardware for any signs of damage, loose connections, or wear. Address any issues promptly.
• Nenhuma peça que possa ser reparada pelo usuário: The LED light source and driver are integrated components. Do not attempt to open or repair the fixture. Contact qualified personnel for any issues beyond basic cleaning and inspection.

Image: The IP65 waterproof rating ensures durability in wet conditions.

7. Solução De Problemas

Before performing any troubleshooting, ensure power is disconnected at the circuit breaker.

8. Especificações

Image: Key features and certifications of the LEDONE Vapor Tight Light.

9. Informações de garantia

LEDONE products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty. Please refer to the product packaging or the official LEDONE webConsulte o site para obter os termos e condições específicos da garantia. Guarde seu comprovante de compra para eventuais solicitações de garantia.

10. Suporte ao cliente

If you have any questions, require technical assistance, or need to report an issue, please contact LEDONE customer support:

• Website: Visit the LEDONE Store on Amazon (for general inquiries)
• E-mail: Consulte a embalagem do produto ou o manual oficial. webSite para contato direto por e-mail com o suporte.
• Telefone: Consulte a embalagem do produto ou o manual oficial. webSite para obter o número de telefone de suporte direto.

Please have your product model number (8FT LED Vapor Tight Light) and proof of purchase ready when contacting support.