Introdução
This manual provides essential information for the safe and efficient operation of your Amazon Basics 8-Sheet Cross-Cut Shredder. Please read these instructions carefully before initial use and retain for future reference. This shredder is designed for personal and home office use to destroy sensitive documents, CDs, and credit cards.
Image: Amazon Basics 8-Sheet Cross-Cut Shredder, showcasing its compact black design with a clear window on the waste bin.
Informações importantes de segurança
AVISO: O não cumprimento destas instruções de segurança pode resultar em incêndio, choque elétrico ou ferimentos.
- Mantenha crianças e animais de estimação longe do triturador.
- Mantenha roupas soltas, joias, cabelos e mãos longe da abertura para entrada de papel.
- Do not store or spray aerosol products in or near the shredder.
- Do not shred metallic credit cards, wet paper, or adhesive labels.
- Always unplug the shredder when moving, cleaning, or emptying the waste bin.
- Não utilize o triturador se o cabo de alimentação estiver danificado.
- Avoid placing the shredder near heat sources or in direct sunlight.
- Certifique-se de que o triturador esteja colocado em uma superfície estável e nivelada.
Configurar
- Descompacte: Retire cuidadosamente o triturador da embalagem.
- Colocação: Place the shredder on a flat, stable surface. Ensure the waste bin is correctly seated in the base.
- Conexão de energia: Conecte o cabo de alimentação a uma tomada elétrica padrão.
- Verificação inicial: Ensure the power switch is in the 'OFF' position before plugging in.
Instruções de operação
Control Switch and LED Indicators
Image: Close-up of the shredder's control panel, illustrating the 4-mode control switch and LED lights.
- FWD (Para a frente): Manually feeds paper through the shredder.
- AUTO (Automático): O triturador inicia automaticamente quando o papel é inserido e para quando a trituração estiver completa. Esta é a configuração recomendada para operação normal.
- OFF: Turns the shredder off. Always set to OFF when not in use or during maintenance.
- REV (Inverso): Reverses the shredding mechanism to clear paper jams.
Indicadores LED:
- Green Light (Power): Indica que o triturador está ligado e pronto para uso.
- Red Light (Overheat/Overload): Illuminates to indicate the shredder is overheating or overloaded. Allow the unit to cool down or reduce the amount of material being shredded.
Image: Top panel detail showing LED indicators, 4-mode switch, and capacity icons.
Destruição de documentos
Image: Demonstrates shredding of up to 8 sheets of paper and a single credit card.
- Set the control switch to 'AUTO'.
- Insert up to 8 sheets of 75 gsm paper into the paper entry slot. The shredder will start automatically.
- For credit cards or CDs, insert one item at a time into the dedicated slot.
- The shredder has a 3-minute continuous run time. After this, it requires a 30-minute cool-down period to prevent overheating. The red LED will indicate if the unit is too hot.
- The shredder can destroy staples and small paper clips, but it is recommended to remove them to prolong blade life. Do not shred metallic credit cards.
Image: A person feeding paper into the shredder, demonstrating typical use.
Manutenção
- Esvaziar o caixote do lixo: Regularly check and empty the 14-liter waste bin to prevent paper jams and ensure optimal performance. Unplug the shredder before removing the bin.
- Limpeza: Limpe a parte externa do triturador com um pano macio e seco. Não utilize produtos de limpeza abrasivos ou solventes.
- Lubrificação: To maintain shredder performance and prolong blade life, lubricate the cutting blades periodically. Use shredder lubricant sheets or apply shredder oil directly to the paper entry slot while running the shredder in 'FWD' mode with a few sheets of paper. Follow the lubricant manufacturer's instructions.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| O triturador não liga. | Not plugged in; power switch in 'OFF' position; waste bin not correctly seated. | Ensure power cord is securely plugged in; set switch to 'AUTO'; ensure waste bin is fully inserted. |
| Shredder stops during operation (Red LED on). | Overheating; overloaded. | Allow the shredder to cool down for 30 minutes; reduce the number of sheets being fed. |
| Atolamento de papel. | Too much paper inserted; paper not fed straight. | Set switch to 'REV' to clear the jam. If unsuccessful, unplug, carefully remove paper, then plug in and try 'REV' again. Lubricate blades if jams are frequent. |
| Shredder runs continuously in 'AUTO' mode. | Sensor obstruído. | Unplug the shredder and clean the paper entry sensor (usually a small clear window or lens). |
Especificações
Image: Illustrates the P-4 security level, showing paper shredded into 0.2 x 0.7 inch particles.
- Marca: Noções básicas sobre a Amazon
- Número do modelo: C276-A
- Cor: Preto
- Tipo de fragmento: Cross-Cut (Security Level P-4, 0.2 x 0.7 inches / 5 x 18 mm particles)
- Capacidade da folha: 8 folhas (papel de 75 g/m²)
- Pedaços: Paper, CDs, Credit Cards (one at a time)
- Capacidade da lixeira: 14 litros
- Tempo de execução contínua: 3 minutos
- Cool-down Time: 30 minutos
- Fonte de energia: Cabo elétrico
- Nível de ruído: 68 dB
- Dimensões (L x P x A): 18.3 cm x 32.5 cm x 35.1 cm (7.2 pol x 12.8 pol x 13.8 pol)
Image: Detailed diagram illustrating the width, depth, and height of the shredder.
Garantia e Suporte
This Amazon Basics product is covered by a limited warranty. Please refer to the warranty information provided with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Amazon Basics customer service through the Amazon website ou sua plataforma de compra.
