Produto acimaview
The Artika Vester LED Vanity Light (model VAN-VE-CR) is a modern, chrome-finished lighting fixture designed for indoor damp locations, such as bathrooms. It features integrated LED technology, offering 1900 lumens of bright, 3000K warm white light with a long lifespan of 50,000 hours. This fixture is dimmable and controlled via a remote.
Imagem: Frente view of the Artika Vester LED Vanity Light, showcasing its chrome finish and linear design.
Configuração e instalação
This section provides general guidelines for installing the Artika Vester LED Vanity Light. Professional installation is recommended. Always ensure the power supply is turned off at the circuit breaker before beginning any electrical work.
Ferramentas necessárias (não incluídas):
- Chave de fenda (Phillips e Flathead)
- Alicates de decapagem de fios
- Fita isolante
- Óculos de segurança
- Volumetage testador
Etapas de instalação:
- Desligue a energia: Locate the circuit breaker controlling the light fixture's power supply and switch it to the OFF position. Verify power is off using a voltage testador.
- Remover o acessório antigo: Carefully remove any existing light fixture from the wall. Disconnect all wires and remove the mounting bracket.
- Instale o suporte de montagem: Attach the new mounting bracket (supplied with the Vester light) to the electrical junction box on the wall using the provided screws. Ensure it is securely fastened.
- Conexões de fios: Connect the electrical wires from the fixture to the corresponding wires from the junction box. Typically, connect the black wire (live) from the fixture to the black wire from the junction box, the white wire (neutral) from the fixture to the white wire from the junction box, and the ground wire (bare copper or green) from the fixture to the ground wire from the junction box. Secure connections with wire nuts and electrical tape.
- Monte o dispositivo: Carefully align the Vester LED Vanity Light with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall and stable.
- Restaurar energia: Depois que o equipamento estiver instalado com segurança, ligue novamente a energia no disjuntor.
No specific installation videos are available for this product. Please refer to the written instructions and consult a qualified electrician if you are unsure about any steps.
Instruções de operação
The Artika Vester LED Vanity Light is designed for simple operation using its included remote control.
Funções do controle remoto:
- Botão de energia: Pressione para ligar ou desligar a luz.
- Dimming Buttons: Use the '+' and '-' buttons to increase or decrease the brightness level of the light. The Vester light is fully dimmable.
Ensure the remote control has working batteries and is pointed towards the light fixture for optimal response. The light operates at a fixed color temperature of 3000K (warm white).
Manutenção
The Artika Vester LED Vanity Light requires minimal maintenance due to its durable construction and long-lasting integrated LED components.
Limpeza:
- Sempre desligue a energia da luminária no disjuntor antes de limpá-la.
- Use um pano macio, seco ou ligeiramente damp cloth to wipe the exterior surfaces of the fixture.
- Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Do not spray cleaning solutions directly onto the fixture.
Componentes de LED:
The LED light source in this fixture is integrated and not user-replaceable. With an average lifespan of 50,000 hours, regular replacement is not anticipated.
Solução de problemas
If you encounter issues with your Artika Vester LED Vanity Light, refer to the following common troubleshooting steps:
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende. | Sem energia para o dispositivo elétrico. | Check the circuit breaker and wall switch. Ensure power is ON. |
| Conexões de fios soltos. | Turn off power at the breaker. Inspect wire connections inside the junction box and re-secure if loose. | |
| A bateria do controle remoto está descarregada. | Substitua a bateria do controle remoto. | |
| A luz pisca ou escurece inesperadamente. | Interruptor dimmer incompatível. | Ensure you are using an LED-compatible dimmer switch. Consult a qualified electrician. |
| Conexões de fios soltos. | Turn off power at the breaker. Inspect wire connections and re-secure. | |
| O controle remoto não responde. | Remote battery is dead or low. | Substitua a bateria do controle remoto. |
| Obstrução entre o controle remoto e o dispositivo de fixação. | Ensure a clear line of sight between the remote and the light fixture. |
Se essas etapas não resolverem o problema, entre em contato com o suporte ao cliente.
Especificações
| Marca | Artigo |
| Número do modelo | VAN-VE-CR |
| Dimensões do produto | 27" C x 4.4" L x 4.4" A |
| O quetage | 21 Watts |
| Volumetage | 120 Volts |
| Brilho | 1900 Lúmens |
| Temperatura de cor (CCT) | 3000K (branco quente) |
| Índice de reprodução de cor (CRI) | 80 |
| Vida média | 50,000 horas |
| Material | Liga de aço, plástico |
| Tipo de montagem | Montagem na parede |
| Método de controle | Controle remoto |
| Classificação do local | Damp Location (Indoor) |
| UPC | 846979036677 |
Informações de garantia
Specific warranty details for the Artika Vester LED Vanity Light (VAN-VE-CR) are typically provided with the product packaging or available on the manufacturer's official website. Please retain your proof of purchase for warranty claims. For detailed information regarding warranty coverage, terms, and conditions, please refer to the documentation included with your product or visit the Artika website.
Apoiar
For further assistance, technical support, or to inquire about replacement parts, please contact Artika customer service. You can typically find contact information on the manufacturer's website ou dentro da embalagem do produto.
You may also visit the official Artika store on Amazon for product information and updates: Artika Store on Amazon
