Introdução
Thank you for choosing the AQQA Aquarium Clip-On LED Light. This manual provides essential information for the proper installation, operation, and maintenance of your new aquarium light. Designed for freshwater aquariums, this 8W LED light offers full spectrum illumination, a 24/7 sunrise/sunset mode, and adjustable brightness levels to create an optimal environment for your aquatic life.
Informações de segurança
- Desligue sempre a alimentação elétrica antes de realizar qualquer manutenção ou limpeza.
- Ensure your hands are dry when handling the power adapter and controller.
- Do not immerse the power adapter or controller in water. The lamp panel is waterproof, but other components are not.
- Mantenha o produto fora do alcance das crianças.
- Do not attempt to modify or repair the light. Contact customer support for assistance.
- Certifique-se de que a fonte de alimentação voltage matches the product's requirements (AC100-240V).
Instruções de configuração
- Monte o Lamp: Deslize o lamp corpo no lamp holder until it is securely seated.
- Fixar ao aquário: Position the clip-on bracket onto the edge of your aquarium glass. Ensure the bracket is nested firmly on the wall of the fish tank.
- Prenda o suporte: Tighten the screws on the bracket to secure the light firmly to the aquarium. The bracket is designed to fit various tank thicknesses without causing damage.
- Ajuste Lamp Posição: O lamp body and holder are flexible. Adjust the extension length of the lamp freely to achieve desired coverage over your aquarium. The lamp body can also be completely removed from the bracket for alternative placement on a tank with a transparent glass cover.
- Conecte a energia: Connect the USB cable from the light to the provided adapter. Plug the adapter into a standard electrical outlet. The light can also be powered by other USB power sources such as a power bank or laptop.
Figura 1: Etapas de instalação
Figure 2: Clip-on Mechanism and Tank Compatibility
Instruções de operação
The AQQA Aquarium Clip-On LED Light features an inline controller with multiple buttons for various functions:
- Botão ON/OFF: Liga ou desliga a luz.
- W+ Button (White Light Brightness): Adjusts the brightness of the white light. There are 10 adjustable brightness levels (10% to 100%).
- B+ Button (Blue/Red Light Brightness): Adjusts the brightness of the blue and red lights. There are 10 adjustable brightness levels (10% to 100%).
- M Button (Mode Selection): Cycles through the three lighting color modes:
- White + Green Light Mode
- Blue + Red Light Mode
- White + Red + Blue + Green Light Mode (Full Spectrum)
- Botão TEMPORIZADOR: Sets the daily timing function. Press to cycle through 6H, 10H, or 12H timer settings. Once set, the light will automatically cycle on/off at the same time each day. For example, if set for 6 hours at 9:20 AM, it will turn off at 3:20 PM and turn on again at 9:20 AM the next day.
- Sunrise/Sunset Button: Activates the 24/7 Sunrise and Sunset Mode.
Figura 3: Controlador sobreview
24/7 Sunrise and Sunset Mode
This mode provides a natural light cycle for your aquarium. In this mode, the light operates in full spectrum, and brightness cannot be manually adjusted. The cycle is divided into four stagé:
- Stage 1 (Sunrise): Light brightness gradually increases from 5% to 100% over 3 hours.
- Stage 2 (Daylight): Maintains 100% brightness for 6 hours.
- Stage 3 (Sunset): Light brightness gradually decreases from 100% to 5% over 3 hours.
- Stage 4 (Night): Light transitions from 5% full spectrum to 5% blue light mode and maintains for 4 hours, then turns off.
Figure 4: 24/7 Sunrise and Sunset Mode Cycle and Color Modes
Função de memória
The light retains your last selected color mode and brightness settings even after power disconnection. However, the timing function (6H, 10H, 12H, and Sunrise/Sunset mode) does not have a memory function and must be reset if power is interrupted.
Figure 5: Memory Function Details
Manutenção
Regular maintenance ensures optimal performance and longevity of your AQQA Aquarium Clip-On LED Light.
- Limpeza: Limpe periodicamente o lamp body and LED panel with a soft, damp cloth to remove dust, water spots, or algae buildup. Ensure the light is unplugged before cleaning.
- Impermeabilização: O lamp panel is designed with glue filling to enhance waterproofing. However, avoid submerging the entire unit or exposing the controller and adapter to water.
- Inspeção de cabos: Regularly check the power cable and connections for any signs of damage or wear. If any damage is observed, discontinue use and contact customer support.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende. | Sem alimentação elétrica; conexão solta; adaptador com defeito. | Check if the adapter is properly plugged into the outlet and the USB cable is securely connected. Try a different USB power source or outlet. |
| Timing function not working correctly. | Power interruption; incorrect setting. | The timing function resets after a power cut. Re-set the desired timer (6H, 10H, 12H) or 24/7 mode. Ensure the button was pressed correctly. |
| Não é possível ajustar o brilho ou o modo de cor. | Light is in 24/7 Sunrise/Sunset Mode. | In 24/7 mode, brightness and color are automatically controlled. Exit 24/7 mode to manually adjust brightness and color. |
| A luz pisca ou escurece inesperadamente. | Fonte de alimentação instável; conexão solta; falha interna. | Ensure power connections are secure. Try a different power source. If the issue persists, contact customer support. |
Especificações do produto
Figure 6: Product Parameters for 8W Model
| Recurso | Detalhe |
|---|---|
| Nome do modelo | AQQA Aquarium Clip on Light AQ059 |
| O quetage | 8 watts |
| Vol de entradatage | CA 100-240 V |
| Volume de saídatage | CC 5 V |
| Tipo de fonte de luz | LED (18 PCS: 2 Red, 2 Green, 2 Blue, 12 White 6500K) |
| Lúmen | 339 |
| Temperatura de cor | 6500 mil |
| Product Dimensions (Light only) | 5.5"P x 1.97"L x 0.31"A |
| Overall Dimensions (with bracket) | 5.5"P x 1.97"L x 4.25"A |
| Peso do item | 0.3 quilogramas (10.6 onças) |
| Fonte de energia | Corded Electric (USB and Adapter) |
| Comprimento do cabo de alimentação | 5 pés (1.54m) |
| Tipo de montagem | Clipe |
| Nível de resistência à água | Waterproof (lamp painel) |
| Componentes incluídos | 1*Clip on light + 1*ABS brackets + 1* Adapter |
Garantia e Suporte
This AQQA Aquarium Clip-On LED Light comes with a Garantia do fabricante de 1 anos a partir da data da compra.
For any questions, concerns, or technical assistance, please contact AQQA customer support. Please have your model number (AQ059) and purchase information available when contacting support.
We are committed to providing long-term quality after-sales service.
