Introdução
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your KoolMore KM-RPPS-3DSS Commercial Pizza Prep Table. Please read this manual thoroughly before installation and use, and retain it for future reference. This unit is designed for commercial food preparation and storage, featuring a refrigerated topping station, a built-in cutting board, and cold storage beneath.
Informações de segurança
Siga sempre as precauções básicas de segurança ao usar este aparelho para reduzir o risco de incêndio, choque elétrico ou ferimentos.
- Certifique-se de que a unidade esteja devidamente aterrada.
- Não opere com um cabo de alimentação ou plugue danificado.
- Mantenha as aberturas de ventilação livres de obstruções.
- Não armazene substâncias explosivas, como latas de aerossol com propulsores inflamáveis, neste aparelho.
- Somente pessoal qualificado deve realizar reparos.
- This appliance uses R290 refrigerant. Handle with care and ensure proper ventilation during servicing.
Configuração e instalação
Desembalando
Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage immediately to the carrier and supplier. Retain packaging materials for inspection.
Colocação
- Place the unit on a strong, level surface capable of supporting its weight (approximately 565 lbs).
- Ensure adequate clearance around the unit for proper ventilation, especially around the compressor compartment.
- Evite a exposição direta à luz solar ou a proximidade com equipamentos que geram calor.
- The unit is equipped with rolling casters for easy positioning. Lock the casters once the unit is in its final location.
Conexão elétrica
Connect the unit to a dedicated 120 Volt, 60 Hz, single-phase grounded electrical outlet. Do not use extension cords or adapter plugs. Ensure the electrical supply matches the requirements specified on the unit's data plate.
Limpeza Inicial
Before initial use, clean the interior and exterior surfaces with a mild soap and water solution. Rinse thoroughly and dry. Install the included shelves.
Imagem: Frente view of the KoolMore KM-RPPS-3DSS pizza prep table with food pans in the topping station and items on the cutting board.
Imagem: Frente view of the KoolMore KM-RPPS-3DSS pizza prep table with the food protection lids closed.
Instruções de operação
Ligando
After installation and initial cleaning, plug in the unit. The digital temperature controller will display the current internal temperature. Allow the unit to run for several hours to reach the desired operating temperature before loading with food products.
Controle de temperatura
The unit is designed to maintain temperatures between 33°F and 40°F (0.5°C and 4.4°C). Adjust the temperature using the digital controller located on the front of the unit. Refer to the controller's specific instructions for detailed programming.
Food Pan Usage
The top rail accommodates up to twelve food pans (sold separately). Place prepared ingredients in these pans for easy access during food preparation. Ensure the food protection lids are closed when the pans are not actively in use to maintain cold temperatures and food safety.
Imagem: Close-up view of the food pan section of the KoolMore KM-RPPS-3DSS pizza prep table, showing various ingredients.
Tábua de corte
Utilize the integrated 92-inch cutting board for food preparation tasks. Keep the cutting board clean and sanitized between uses to prevent cross-contamination.
Armazenamento refrigerado
The three-door refrigerated compartment below the work surface provides additional cold storage. Organize items on the adjustable wire shelves. Ensure doors are closed securely after each access to maintain internal temperatures.
Imagem: Interior view of the KoolMore KM-RPPS-3DSS pizza prep table with all three doors open, revealing the wire shelves inside.
Manutenção
Limpeza diária
- Clean the cutting board and food pan area with a food-safe cleaner and sanitizer.
- Limpe todas as superfícies de aço inoxidável com um pano.amp Pano e detergente neutro. Seque bem para evitar manchas de água.
Limpeza semanal/mensal
- Clean the interior of the refrigerated compartments, including shelves.
- Inspect door gaskets for tears or damage and clean them to ensure a proper seal.
- Clean the condenser coil (located in the compressor compartment) to ensure efficient operation. This should be done by qualified personnel or by following specific instructions in a more detailed service manual. A dirty condenser coil can lead to increased energy consumption and reduced cooling performance.
Sistema de degelo
This unit features an automatic defrost system. Ice buildup on the evaporator coil will be periodically melted and drained. Ensure the drain line is clear and free of obstructions.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Unidade não refrigerando |
|
|
| Ruído excessivo |
|
|
| Água no chão |
|
|
For issues not listed or if troubleshooting steps do not resolve the problem, contact KoolMore customer support or a qualified service technician.
Especificações
| Número do modelo | KM-RPPS-3DSS |
| Dimensões (D x L x A) | 31.49 x 91.88 x 39.44 polegadas |
| Peso do item | 565 libras |
| Capacidade | 24 pés cúbicos |
| Volumetage | 120 Volts |
| Consumo anual de energia | 625 quilowatts-hora |
| Faixa de temperatura | 33°F - 40°F |
| Refrigerante | R-290 |
| Sistema de degelo | Automático |
| Número de portas | 3 |
| Prateleiras | 3 (Fio) |
| Tipo de material | Aço inoxidável |
| Certificação | Listado ETL |
Image: Diagram showing the dimensions of the KoolMore KM-RPPS-3DSS pizza prep table.
Garantia e Suporte
For warranty information, please refer to the documentation provided with your purchase or visit the official KoolMore website. For technical support, parts, or service inquiries, please contact KoolMore customer service. Ensure you have your model number (KM-RPPS-3DSS) and purchase date available when contacting support.
KoolMore Customer Service: www.koolmore.com/support (Examp(O link, o link real pode variar)
