Introdução
Thank you for choosing the Perlegear PGTVS29 Single Monitor Stand. This freestanding monitor mount is designed to enhance your workspace by providing versatile positioning for your 13-34 inch screens. With features like 360-degree rotation, 5 ergonomic height settings, and adjustable swivel and tilt, this stand offers optimal viewing flexibility and improved posture. Please read this manual carefully before installation and use to ensure safe and correct operation.
Informações importantes de segurança
Please read all instructions carefully before assembly. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. Check for any missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose not explicitly specified in this manual.
- Capacidade de peso: Não exceda a capacidade máxima de peso de 44 kg (20 lbs).
- Tamanho da tela: Compatível com telas de 13 a 34 polegadas.
- Compatibilidade VESA: Supports VESA mounting patterns 50x50mm and 100x100mm. Verify your screen's VESA pattern before installation.
- Estabilidade: Certifique-se de que o suporte esteja colocado em uma superfície estável e nivelada para evitar que tombe.
- Crianças: Keep children away from the assembly area. Small parts may be swallowed.
Conteúdo da embalagem
Please check that all components are included and undamaged. If any parts are missing or damaged, contact Perlegear customer support.
- Support Pillar (1)
- Tempered Glass Base (1)
- VESA Plate (1)
- Kit de ferragens para montagem (parafusos, arruelas, espaçadores)
- Clipes de cabo (2)
- Assembly Tools (Allen key, screwdriver)
- Manual de Instruções (1)
Configuração e instalação
Follow these steps to assemble your Perlegear PGTVS29 Monitor Stand.
Step 1: Attaching the VESA Plate to Your Monitor
Determine the correct screws and spacers for your monitor's VESA mounting holes. For flat-back screens, use appropriate screws directly. For curved screens or screens with a bump, use spacers to ensure a secure fit. Attach the VESA plate to the back of your monitor.
Step 2: Connecting the Support Pillar to the Base
Attach the foot pads to the matte side of the tempered glass base. Secure the support pillar to the tempered glass base using the provided screws, steel washers, and plastic washers. Ensure plastic washers contact the glass to prevent damage.
Passo 3: Fixando o Monitor ao Pilar de Suporte
Carefully lift your monitor (with the VESA plate attached) and slide it onto the support pillar. Secure the monitor to the support pillar using the knob on the VESA plate. Ensure it clicks into place securely.
Guia de vídeo de montagem
Vídeo: Official Perlegear video demonstrating the assembly process and key features of the monitor stand, including attaching the VESA plate, connecting the pillar to the base, and mounting the screen.
Instruções de operação
The Perlegear PGTVS29 Monitor Stand offers multiple adjustment options to customize your viewexperiência.
Ajuste de altura
The monitor stand features 5 height settings, allowing you to adjust your screen from 9.27 inches to 15.26 inches tall. To adjust the height, loosen the knob on the support pillar, slide the monitor to your desired height, and then re-tighten the knob to secure it.
Ajuste de inclinação
Adjust the screen tilt from -15° to +10° using the convenient tilt knob located on the VESA plate. Loosen the knob, adjust the screen to your preferred angle, and then tighten the knob to lock it in place.
Ajuste giratório
The screen can be swiveled manually +/-50° for ultimate viewing flexibility. Only swivel the screen by the screen edges; do not press on the screen itself.
Rotação de 360°
Rotate your screen a full 360° to switch between landscape and portrait orientations. This feature is compatible even with large 34-inch displays, though off-centered VESA patterns may affect perfect vertical orientation.
Gerenciamento de cabos
Utilize the two included cable clips to route cables neatly along the back of the support pillar. This helps maintain a clean and organized workspace.
Manutenção
To ensure the longevity and optimal performance of your Perlegear PGTVS29 Monitor Stand, follow these simple maintenance guidelines:
- Limpeza: Limpe o suporte com um pano macio e seco.amp pano. Evite usar produtos de limpeza abrasivos ou solventes que possam danificar o acabamento.
- Fixadores: Verifique periodicamente todos os parafusos e conexões para garantir que permaneçam firmes e seguros. Reaperte-os, se necessário.
- Movimento: If any moving parts become stiff, apply a small amount of silicone-based lubricant to the joints.
Solução de problemas
Caso encontre algum problema com o suporte do seu monitor, consulte os problemas e soluções comuns a seguir:
- Monitor is wobbly:
- Ensure all screws securing the monitor to the VESA plate and the pillar to the base are tightened.
- Verify the stand is on a flat, stable surface.
- Monitor does not tilt/swivel/rotate smoothly:
- Check if the tilt knob is sufficiently loosened before attempting to adjust.
- Apply a small amount of silicone lubricant to the moving joints if resistance persists.
- Monitor cannot be mounted:
- Confirm your monitor's VESA pattern matches the stand's compatibility (50x50mm or 100x100mm).
- Ensure your monitor's weight (max 44 lbs) and size (max 34 inches) are within the specified limits.
- Use the correct screws and spacers from the mounting hardware kit for your specific monitor.
If you are unable to resolve an issue, please contact our U.S.-based product support team for assistance.
Especificações
| Recurso | Detalhe |
|---|---|
| Marca | perolização |
| Número do modelo | PGTVS29 |
| Peso do item | 4.95 libras (2.25 kg) |
| Dimensões da embalagem | 17.65 x 9.02 x 2.8 polegadas |
| Cor | Preto |
| Material | Metal and Tempered Glass Base |
| Tipo de montagem | Suporte de mesa |
| Tipo de movimento | Giratório |
| Tamanho da tela compatível | 13-34 polegadas |
| Capacidade Máxima de Carga | 44 libras (20 kg) |
| Compatibilidade VESA | 50x50mm, 100x100mm |
| Configurações de altura | 5 settings (9.27" to 15.26") |
| Ajuste de inclinação | -15° a +10° |
| Ajuste giratório | +/-50° |
| Rotação | 360° |
Garantia e Suporte
Perlegear stands behind the quality of its products. For specific warranty information, please refer to the product packaging or contact Perlegear customer service. If you have any questions, require technical assistance, or need to report missing/damaged parts, please contact our U.S.-based product support team. Contact details can typically be found on the product packaging or the official Perlegear website.
