Manual do Usuário do Controle Remoto Sem Fio Xnbada RC01RF 2.4G RF de 4 Zonas e Cor Única

1. Introdução

The Xnbada RC01RF is a wireless 2.4G RF remote control designed for single color LED strip lights. It offers 4-zone control, allowing you to manage multiple groups of LED strips independently or simultaneously. This remote features precise brightness adjustment and operates wirelessly up to 30 meters (98 feet), providing flexible control without complex wiring. It is compatible with Xnbada C01W, C01Z, and C01RF single color controllers.

2. Informações de segurança

• Leia todas as instruções cuidadosamente antes de usar.
• Este dispositivo é destinado somente para uso interno.
• Do not expose the remote control to moisture or extreme temperatures.
• Utilize apenas pilhas AAA, conforme especificado. Certifique-se de observar a polaridade correta ao inserir as pilhas.
• Mantenha fora do alcance de crianças.
• Do not attempt to disassemble or repair the remote control. This will void the warranty.

3. Conteúdo da embalagem

Verifique se todos os itens estão presentes no seu pacote:

• Xnbada RC01RF Wireless Remote Control (Single Color)
• Suporte de parede
• Parafusos de montagem (2x)

Image: The Xnbada RC01RF remote control shown with its included wall mount holder and two mounting screws.

4. Produto acabadoview

The RC01RF remote control features an intuitive layout for easy operation of your single color LED strip lights. Below is a diagram illustrating the functions of each button.

Image: Diagram showing the Xnbada RC01RF remote control with labels for each button's function, including ON/OFF, brightness adjustment, and zone selection.

• Botão LIGAR: Press to turn ON all linked devices.
• Botão DESLIGAR: Press to turn OFF all linked devices.
• Brightness Ring: Touch the slider to adjust brightness from 1% to 100%.
• Brightness Up (☀): Pressione para aumentar o brilho.
• Brightness Down (☁): Pressione para diminuir o brilho.
• Botão M: Cycles through dynamic modes (if supported by the connected controller for single color).
• 30% Brilho: Press to set brightness to 30%.
• 60% Brilho: Press to set brightness to 60%.
• 100% Brilho: Press to set brightness to 100%.
• S- Button: Decreases dynamic mode speed.
• S+ Button: Increases dynamic mode speed.
• Zone 1-4 Buttons: Press to select a specific zone for control. Press and hold to link/unlink a controller to that zone.

5. Configuração

5.1 Instalação da bateria

The RC01RF remote control requires two AAA batteries (not included).

1. Localize a tampa do compartimento da bateria na parte traseira do controle remoto.
2. Deslize a tampa aberta.
3. Insira duas pilhas AAA, certificando-se da polaridade correta (+ e -).
4. Deslize a tampa do compartimento da bateria de volta para o lugar até ouvir um clique que a encaixe firmemente.

5.2 Pairing the Remote Control with a Controller

The RC01RF remote control uses 2.4G RF technology for a fast and direct connection to compatible controllers (e.g., C01W, C01Z, C01RF) without requiring Wi-Fi, Bluetooth, or an app.

1. Ensure your LED strip controller is powered off.
2. Power on the LED strip controller.
3. Within 3 seconds of powering on the controller, press and hold one of the Zone buttons (1, 2, 3, or 4) on the RC01RF remote control.
4. If pairing is successful, the connected LED strip will flash three times. This indicates the controller is now linked to the selected zone on your remote.
5. Repeat this process for other controllers if you wish to assign them to different zones (1-4). Each zone can control multiple controllers.

To unlink a controller from a zone, power cycle the controller, and within 3 seconds, press the corresponding Zone button 5 times quickly. The LED strip will flash 10 times to confirm unlinking.

5.3 Instalação de montagem em parede

The included wall mount holder allows for convenient storage and access to your remote control.

1. Choose a suitable location on a wall or flat surface.
2. Use the wall mount holder as a template to mark the positions for the two mounting screws.
3. Faça furos piloto, se necessário.
4. Secure the wall mount holder to the surface using the provided screws.
5. Insira o controle remoto no suporte.

Image: The Xnbada RC01RF remote control shown securely placed in its wall-mounted holder, demonstrating flexible placement options.

6. Instruções de operação

6.1 Basic Control (All Zones)

• Ligar / desligar: Pressione o ON button to turn on all linked lights. Press the DESLIGADO button to turn off all linked lights.
• Ajuste de brilho: Toque o anel de brilho to smoothly adjust the light intensity from 1% to 100%. Alternatively, use the Aumentar o brilho (☀) e Diminuição do brilho (☁) buttons for incremental adjustments.
• Brilho predefinido: Use the dedicated buttons to quickly set brightness to 30%, 60%, ou 100%.

Image: An illustration demonstrating brightness adjustment using the remote control in a kitchen setting, showing a slider for precise control.

6.2 4-Zone Group Control

The RC01RF remote allows you to control up to four independent zones of single color LED strip lights.

• Selecione uma zona: Pressione o desejado Zone button (1, 2, 3, or 4) to select that zone. Once selected, any commands (ON/OFF, brightness) will only apply to the controllers linked to that specific zone.
• Control All Zones: To control all linked zones simultaneously, ensure no specific zone button is actively selected (or press the currently active zone button again to deselect it, if applicable, or simply use the master ON/OFF).
• Auto-Transmission: The remote control utilizes an auto-transmission feature. If a controller is within 30 meters of another controller, the signal can be transmitted, extending the effective control distance for larger installations.

Image: Diagram illustrating the simultaneous auto-transmission feature, where the remote signal is relayed between controllers within a 30-meter range, extending control distance.

6.3 Dynamic Modes (if applicable)

If your connected single color controller supports dynamic modes (e.g., flashing, fading effects), you can activate them:

• Pressione o Botão M to cycle through available dynamic modes.
• Use o S- e S+ buttons to decrease or increase the speed of the selected dynamic mode.

7. Manutenção

7.1 Substituição da bateria

When the remote control's range decreases or it becomes unresponsive, it may be time to replace the batteries.

1. Follow the steps in Section 5.1 to open the battery compartment.
2. Remova as pilhas AAA antigas.
3. Insert two new AAA batteries, observing correct polarity.
4. Feche o compartimento da bateria.

Descarte as baterias usadas de acordo com os regulamentos locais.

7.2 Limpeza

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

8. Solução De Problemas

9. Especificações

Image: A visual representation of various compatible Xnbada LED controllers, including C01W, C02W, C03W, C04W, C05W, WB5, FUT037, C01Z, C02Z, C03Z, C04Z, C05Z, LM051, and LM053.

10. Garantia e Suporte

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Xnbada store on Amazon:

Xnbada Official Store

If you encounter any issues not covered in this manual, please contact Xnbada customer service for assistance.