Vurkcy Keyless Entry Remote Car Key Fob User Manual

1. Produto acabadoview

This Vurkcy keyless entry remote car key fob is designed as a replacement for original factory remotes. It provides convenient access to your vehicle's locking and unlocking functions, along with a panic alarm feature.

A black keyless entry remote with three buttons: lock, unlock, and a red 'PANIC' button.

The remote operates on specific radio frequencies and is pre-tested to ensure functionality upon arrival. It comes with a pre-installed CR2032 battery.

Principais características:

• Funções de bloqueio e desbloqueio
• Alarme de pânico
• Construção durável
• Pre-installed CR2032 Battery

2. Compatibilidade do veículo

This key fob is compatible with the following Honda vehicle models and years:

• Honda Civic EX LX DX: 2001, 2002, 2003, 2004, 2005 (Does not work with Civic Si trim models)
• Honda Pilot: 2003, 2004, 2005, 2006, 2007

It is designed to replace remotes with the following FCC IDs and Part Numbers:

• ID FCC: NHVWB1U523 or NHVWB1U521
• Números de peça: 72147-S5A-A01, 08E61-S5D-1M0-01

Notas importantes sobre compatibilidade:

• This key fob não support 2001-2005 Honda Civic Si models.
• This key fob não work on vehicles with a push-start button ignition. It only supports regular key vehicles.
• This key fob não support vehicles with Passive Entry Passive Start (PEPS).

This image details the vehicle compatibility, including specific Honda Civic (2001-2005) and Pilot (2003-2007) models. It also explicitly states that the key fob does not support push-start button vehicles, Civic Si models, or vehicles with Passive Entry Passive Start (PEPS).

3. Setup and Programming Instructions

This key fob is designed for self-programming, provided you have at least one working original master key. Follow the steps below carefully. If you encounter difficulties, professional assistance from a locksmith or dealership may be required for some vehicle models.

This image provides key programming notes, stating that the fob is self-programmable with one working original master key, does not support 2001-2005 Civic Si models, does not work on push-start vehicles, and does not support vehicles with Passive Entry Passive Start (PEPS). It also lists websites for programming guidance: keyfobprogram.com and programyourremote.com.

General Programming Steps:

1. Ensure all vehicle doors are closed and unlocked.
2. Insert the original working key into the ignition.
3. Turn the ignition to the 'ON' position (II) and then immediately to 'OFF' (0) four times within 10 seconds.
4. On the fourth turn to 'ON', press the 'Lock' button on the original key fob within 5 seconds. The door locks should cycle (lock and unlock) to confirm the system has entered programming mode.
5. Within 5 seconds of the door locks cycling, press the 'Lock' button on the novo key fob. The door locks should cycle again to confirm successful programming of the new fob.
6. To program additional new key fobs, repeat step 5 for each additional fob within 5 seconds of the previous fob's successful programming.
7. Turn the ignition to 'OFF' and remove the key to exit programming mode. Test all programmed key fobs.

For detailed, vehicle-specific programming instructions, please refer to the following external resources:

• keyfobprogram.com
• programyourremote.com

Nota: Estes websites may contain advertisements. Close any ads to view as instruções.

Programming Demonstration Video:

4. Operating Your Key Fob

The Vurkcy key fob features three primary buttons for vehicle control:

This image illustrates the function of each button on the key fob: the top button for locking, the middle button for unlocking, and the red 'PANIC' button for activating the alarm.

• Botão de bloqueio (🔒): Press this button once to lock all vehicle doors. The vehicle's lights may flash and/or the horn may chirp to confirm locking.
• Botão de desbloqueio (🔓): Press this button once to unlock the driver's door. Press it a second time within 5 seconds to unlock all other vehicle doors. The vehicle's lights may flash to confirm unlocking.
• Panic Button (PANIC): Press and hold the red 'PANIC' button for approximately 2-3 seconds to activate the vehicle's alarm system. Press any button on the fob or insert the key into the ignition to deactivate the alarm.

5. Battery Replacement (Maintenance)

The key fob is powered by a CR2032 lithium coin cell battery. If the remote's range decreases or it stops responding, the battery may need replacement.

um explodiu view of the key fob showing its internal components, including the circuit board with an upgrade durability chip, a CR2032 battery, and a larger ring loop for attachment.

Etapas para substituição da bateria:

1. Carefully separate the two halves of the key fob casing using a small flat-head screwdriver or a coin. There is usually a small notch on the side for this purpose.
2. Locate the circular CR2032 battery inside the casing.
3. Gently pry out the old battery. Note the orientation of the positive (+) side.
4. Insert a new CR2032 battery with the positive (+) side facing the same direction as the old battery.
5. Align the two halves of the key fob casine pressione-os firmemente até que se encaixem com segurança no lugar.
6. Test the key fob's functionality with your vehicle.

6. Solução De Problemas

If your Vurkcy key fob is not functioning as expected, consider the following troubleshooting steps:

• Fob Not Responding:
  • Check the battery. Replace it with a new CR2032 battery if necessary (refer to Section 5).
  • Ensure the key fob was programmed correctly. Re-attempt the programming steps (refer to Section 3), paying close attention to timing.
• Alcance reduzido:
  • Isso geralmente indica bateria fraca. Substitua a bateria CR2032.
  • Environmental factors or interference can also affect range. Try operating the fob in a different location.
• Vehicle Not Entering Programming Mode:
  • Verify that your vehicle is listed as compatible (refer to Section 2).
  • Ensure all doors are closed and unlocked before starting the programming sequence.
  • Confirm you are using an original, working master key for the initial steps.
  • The timing for turning the ignition and pressing buttons is crucial. Try again, ensuring precise timing.
• Fob Programmed but Not Working:
  • Some vehicles may require a locksmith or dealership for programming, especially if self-programming attempts fail repeatedly.
  • Double-check that the FCC ID and Part Numbers match your original remote (refer to Section 2).

7. Especificações do produto

8. Garantia e Suporte

Vurkcy is committed to providing quality replacement automotive products. This key fob has been pre-tested to ensure quality and functionality. If you have any questions or require assistance with your key fob, please contact Vurkcy customer support through the retailer where the product was purchased.

Guarde o comprovante de compra para eventuais solicitações de garantia ou suporte técnico.