1. Introdução
The WALI TCW2-SOL Dummy Fake Security Camera is designed to provide a visual deterrent against potential intruders. It closely resembles a real security camera and features an integrated motion sensor flood light and a solar panel for power. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device.
2. Produto acabadoview
2.1 Conteúdo da embalagem
- 2 x WALI Dummy Solar Cameras (White)
- 6 x Parafusos de montagem
- 2 x Security Warning Stickers
- 1 x Manual do Usuário
2.2 Principais Características
- Design realista: Closely mimics the appearance of a functional security camera.
- Motion Sensor Flood Light: 800-lumen light activates upon detecting motion from 3 to 5 meters away.
- Alimentado por energia solar: Built-in solar panel charges during the day, eliminating the need for frequent battery replacement.
- Three PIR Modes: Customizable illumination modes for various security needs.
- À prova de intempéries: IP66 rainproof design and high-strength ABS housing for outdoor use.
- Fácil instalação: No wiring or electricity required; mounts easily on walls or ceilings.
- Ângulos ajustáveis: Solar panel and camera base can be adjusted for optimal sunlight exposure and coverage.
Image 2.1: WALI Dummy Fake Camera with Solar Panel and Motion Sensor Flood Light, highlighting motion detection, waterproof, quick install, and wireless features.
3. Configuração e instalação
Follow these steps to properly set up and install your WALI Dummy Fake Security Camera:
- Desembale o dispositivo: Carefully remove all components from the packaging. Verify that all items listed in Section 2.1 are present.
- Escolha um local: Selecione um local ao ar livre que receba ample direct sunlight for the solar panel to charge effectively. Consider areas like porches, backyards, or garage entrances for maximum deterrence.
- Monte o suporte: Use the provided mounting screws to securely attach the camera's base bracket to a wall or ceiling. Ensure the surface is stable enough to support the camera.
- Anexe a câmera: Screw the camera unit onto the mounted bracket.
- Ajustar ângulos: Adjust the solar panel to face the sun for optimal charging. Adjust the camera's angle to cover the desired area. The camera offers 0-90° tilt and 360° rotation.
Video 3.1: Demonstrates the physical installation and adjustment of the WALI Dummy Fake Security Camera.
Imagem 3.2: Close-up view of the solar panel, 8 professional LED lights, and the mode switching button on the WALI Dummy Camera.
Image 3.3: Illustrates the wide angle adjustments for the camera, showing 0-90° tilt and 360° rotation capabilities.
4. Instruções de operação
The WALI Dummy Fake Security Camera features three Passive Infrared (PIR) modes for its motion sensor flood light. These modes can be cycled by pressing and holding the switch button located on the solar panel for 3 seconds.
4.1 PIR Modes
- Mode 1 (Night Dim Light + Detection Mode): At night, the light remains dimly lit. Upon motion detection, it switches to full brightness.
- Mode 2 (Night Detection Mode): At night, the light remains off. Upon motion detection, it switches to full brightness, and a red light keeps flashing. (Note: The red light does not work on other modes.)
- Mode 3 (Night Constant On Mode): The light provides full illumination at night for 4 hours, then changes to a dim light.
Video 4.1: Illustrates the three PIR modes of the WALI Dummy Fake Security Camera, showing how the light behaves in each mode.
Video 4.2: Shows the WALI Dummy Fake Security Camera in action, demonstrating its motion-activated flood light and red flashing light features.
Image 4.3: Explains the three PIR modes and illustrates the motion detection principle and range (3-5 meters) of the WALI Dummy Camera.
Image 4.4: Depicts the WALI Dummy Camera charging during the day and automatically activating its light at night.
5. Manutenção
To ensure optimal performance and longevity of your WALI Dummy Fake Security Camera, consider the following maintenance tips:
- Limpe o painel solar: Limpe regularmente o painel solar com um pano macio e seco.amp Use um pano para remover poeira, sujeira ou detritos que possam prejudicar a eficiência do carregamento.
- Verifique se há obstruções: Ensure no tree branches, leaves, or other objects are blocking the solar panel or the motion sensor's field of view.
- Inspecione a montagem: Verifique periodicamente se a câmera está firmemente montada e se todos os parafusos estão apertados.
- Proteção contra intempéries: While the camera is IP66 rainproof, extreme weather conditions (heavy snow, ice) may temporarily affect performance. Clear any accumulation from the solar panel and lens.
6. Solução De Problemas
If you encounter issues with your WALI Dummy Fake Security Camera, refer to the following common problems and solutions:
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende à noite. | Carregamento solar insuficiente. | Certifique-se de que o painel solar esteja sob luz solar direta por pelo menos 6 a 8 horas diárias. Limpe o painel solar. |
| O sensor de movimento não está detectando movimento. | Sensor obstruído ou modo incorreto. | Clear any obstructions from the sensor. Cycle through the PIR modes to ensure the correct detection mode is active. |
| Light is too dim or stays on constantly. | Incorrect PIR mode selected. | Press and hold the switch button for 3 seconds to cycle through the three PIR modes until the desired setting is achieved. |
| Camera appears loose after installation. | Mounting screws or adjustment knob not tight. | Tighten all mounting screws and the adjustment knob on the camera base to secure its position. |
7. Especificações
| Recurso | Detalhe |
|---|---|
| Número do modelo | TCW2-SOL |
| Uso interno/externo | Interior, Exterior |
| Fonte de energia | Alimentado por energia solar |
| Tipo de montagem | Montagem na parede |
| Número de itens | 2 |
| Material | Acrilonitrila Butadieno Estireno (ABS) |
| Dimensões do item (C x L x A) | 7.68 x 3.35 x 4.92 polegadas |
| Nível de resistência à água | Impermeável (IP66) |
| Pilhas necessárias? | No (Internal Lithium Ion battery for solar storage) |
| Tipo de alerta | Apenas movimento |
| Tipo de fonte de luz | Infravermelho |
| Viewângulo de engate | 150 graus |
| Recurso especial | Built-in Light, Motion Sensor, Weather Proof |
8. Garantia e Suporte
WALI products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official WALI website. For technical assistance, installation queries, or any other support needs, please contact WALI customer service. Contact details are typically found on the product packaging or the manufacturer's website.
