Phanteks XT View Manual de Instruções do Gabinete Gamer Mid-Tower

1. Introdução

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Principais características:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Conteúdo da embalagem

Verifique se todos os componentes estão presentes na embalagem:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Laços de zíper (30x)
  • MB/SSD Screws (30x)
  • Parafusos de aperto manual (4x)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Configuração e instalação

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View chassis.

3.1. Preparando o Chassi

1. Descompacte: Retire cuidadosamente o chassi da embalagem.
2. Remover painéis: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Imagem 3.1: Interior view of the XT View chassis, ready for component installation.

3.2. Instalação da placa-mãe

1. Instalar espaçadores: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Localizar placa-mãe: Carefully align your motherboard with the standoffs and I/O shield opening.
3. Placa-mãe segura: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Instalação da Unidade de Alimentação (PSU)

1. Posição PSU: Slide the PSU into its designated compartment at the bottom rear of the chassis.
2. Fonte de alimentação segura: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Instalação da unidade de armazenamento

The chassis supports 3.5" HDDs and 2.5" SSDs.

• Disco rígido de 3.5": Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• 2.5" SSD: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Fixe as unidades com os parafusos apropriados.

3.5. Instalação da placa de expansão (GPU)

1. Remova as tampas dos slots: Remova as tampas dos slots de expansão necessárias da parte traseira do chassi.
2. Insira o cartão: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Cartão seguro: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Imagem 3.2: Interior traseiro view highlighting expansion slots and fan mounting points.

3.6. Instalação de ventilador e radiador

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Top: Up to 360mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Gerenciamento de cabos

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

Imagem 3.3: Traseira view illustrating cable management space.

3.8. Conexões de E/S frontais

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• Conector USB 3.0
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Instruções de operação

4.1. Ligar/desligar

Pressione o Botão de energia located on the top front panel to turn the system on or off.

4.2. Conectividade do painel frontal

O painel de E/S frontal oferece acesso conveniente a:

• 1x porta USB 3.0
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. Manutenção

5.1. Limpeza dos filtros de pó

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Remover filtros: Gently slide out or unclip the dust filters.
2. Limpar: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. Reinstale: Place the clean, dry filters back into their positions.

5.2. Limpeza Geral

Para superfícies externas, use um material macio e damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. Solução De Problemas

Esta seção aborda problemas comuns que você pode encontrar.

6.1. O sistema não liga

• Conexões de energia: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Conexões da placa-mãe: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Front Panel Header: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Sincronização da placa-mãe: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Funcionalidade do botão: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Conexões: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• Obstruções: Check for any cables or objects obstructing fan blades.
• Pó: Clean any dust buildup on fan blades.

7. Especificações

8. Suporte e garantia

For additional information, technical support, or warranty inquiries, please visit the official Phanteks website:

www.phanteks.com

Refer to the Phanteks website for the most current warranty terms and conditions applicable to your region.