Informações importantes de segurança
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.
- Desconecte a energia: Always turn off power at the circuit breaker before installing, servicing, or removing the fixture.
- Eletricista qualificado: A instalação deve ser realizada por um eletricista qualificado ou por uma pessoa familiarizada com a construção e o funcionamento do produto, bem como com os riscos envolvidos.
- Aterramento: Certifique-se de que a luminária esteja devidamente aterrada para evitar possíveis choques elétricos.
- Damp Localização classificada: Esta luminária é adequada para damp locations, such as bathrooms and showers, but not for direct water exposure.
- Compatibilidade: Use only with 120 VAC power supply. Do not attempt to modify the fixture.
- Aquecer: LED fixtures generate heat. Allow adequate ventilation around the fixture.
Produto acimaview
The Maxxima MRL-61505 is a 5-inch and 6-inch retrofit recessed anti-glare LED downlight designed for easy installation into existing recessed can housings. It offers 1300 lumens of illumination and features 5 selectable color temperatures, ranging from warm white to daylight, to suit various lighting preferences. The fixture is dimmable and includes an E-26 quick connect adapter for convenient setup.
Principais características:
- Eficiência energética: 15W LED equivalent to 100W incandescent light, reducing energy consumption.
- Alto Brilho: Provides 1300 lumens with an anti-glare design.
- 5 CCT Selectable: Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight) using a switch on the fixture.
- Regulável: Compatible with most standard LED dimmers, offering a dimming range of 10% to 100%.
- Alto índice de reprodução de cor (IRC): 90 CRI ensures accurate color appearance.
- Construção durável: Made with a cast aluminum body for lightweight and robust performance.
- Design antirreflexo: Smooth baffle deep recessed trim minimizes glare.
Figura 1: Frente view of the Maxxima Retrofit Recessed LED Downlight, showing the anti-glare design and E-26 adapter.
Figura 2: Angulado view of the downlight, illustrating the mounting springs for installation into a recessed can.
Vídeo 1: Um excessoview of the Maxxima Retrofit Anti-Glare LED Downlight, demonstrating its features and selectable color temperatures.
Configuração e instalação
Follow these steps to properly install your Maxxima LED Downlight:
- Desligar a energia: Before starting, ensure the power to the existing recessed can fixture is turned off at the circuit breaker.
- Remover o acabamento existente: Carefully remove the existing bulb and trim from the recessed can.
- Connect E-26 Adapter: Connect the E-26 quick connect adapter (provided) to the fixture's wiring. Then, screw the E-26 adapter into the existing socket of the recessed can.
- Selecione a temperatura de cor (CCT): Locate the CCT selection switch on the back of the downlight. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch.
- Instalar luminária embutida: Gently push the wiring and the E-26 adapter into the recessed can. Compress the spring clips on the sides of the downlight and insert the fixture into the can. Release the clips to secure the downlight flush against the ceiling.
- Restaurar energia: Once the downlight is securely installed, restore power at the circuit breaker.
Figure 3: Illustration of connecting the E-26 quick connect adapter to the downlight's wiring.
Figura 4: Traseira view of the downlight, highlighting the CCT selection switch.
Figura 5: Detalhado view of the CCT switch, showing the five color temperature options.
Dicas de instalação:
- Tensão da mola: If the light does not stay flush, ensure the spring clips are properly engaged with the torsion clips inside the recessed can. Some older cans may require adjustment or the use of compatible mounting clips.
- Wire Clearance: Verify that internal wires within the can are not obstructing the downlight, which could prevent it from seating properly.
Instruções de operação
The Maxxima LED Downlight is designed for simple operation once installed.
Seleção de temperatura de cor:
The color temperature is set using the switch on the back of the fixture during installation. To change the CCT after installation, you must carefully remove the fixture from the recessed can, adjust the switch, and then reinstall it. The available color temperatures are:
- 2700K: Branco suave
- 3000K: Branco quente
- 3500K: Branco brilhante
- 4000K: Branco neutro
- 5000K: Luz do dia
Figure 6: Visual guide to the five selectable color temperatures provided by the downlight.
Funcionalidade de escurecimento:
This downlight is dimmable from 10% to 100% with compatible LED dimmers. Ensure your dimmer switch is rated for LED lighting to achieve optimal performance and avoid flickering or damage.
Manutenção
The Maxxima LED Downlight requires minimal maintenance.
- Limpeza: Para limpar a luminária, certifique-se de que a energia esteja desligada. Use um pano macio, seco ou levemente úmido.amp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Sem necessidade de substituição da lâmpada: This fixture features an integrated LED, meaning no bulb replacement is necessary throughout its lifespan.
Solução de problemas
If you encounter issues with your downlight, refer to the following common problems and solutions:
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende. | No power, loose connection, faulty fixture. | Check circuit breaker. Verify E-26 adapter is securely screwed in and connections are tight. If problem persists, contact customer support. |
| A luz pisca ou diminui a intensidade de forma inadequada. | Incompatible dimmer, loose wiring. | Ensure dimmer is LED compatible. Check all electrical connections. |
| Light does not sit flush with the ceiling. | Spring clips not engaged, internal obstruction, insufficient spring tension. | Ensure spring clips are fully engaged with the can's torsion clips. Check for wires or insulation obstructing the fixture. Adjust spring tension if necessary by gently bending the springs closer together at the top. |
| Temperatura de cor incorreta. | A chave CCT está configurada incorretamente. | Remove fixture, adjust CCT switch to desired setting, and reinstall. |
Especificações
| Recurso | Detalhe |
|---|---|
| Nome do modelo | LMR-61505 |
| Marca | Máxima |
| Dimensões do produto | 7.1"C x 7.1"L x 4.5"A |
| O quetage | 15 watts |
| Brilho | 1300 Lúmens |
| Temperatura de cor | 2700K/3000K/3500K/4000K/5000K Selectable |
| CRI | 90 |
| Volumetage | 120 Volts (CA) |
| Regulável | Sim (10% - 100%) |
| Ângulo do feixe | 36° |
| Material | Alumínio |
| Tipo de instalação | Flush Mount (Retrofit for 5" & 6" cans) |
| Base de lâmpada | E26 Quick Connect Adapter |
| Lifetime Hours | 50,000 horas |
| Certificações | ETL Listed, T20 California Compliant |
| Peso do item | 1.5 libras |
| Uso interno/externo | Interior (Damp Classificado) |
Informações de garantia
The Maxxima MRL-61505 LED Downlight comes with a Garantia de 3 ano from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.
Suporte ao cliente
For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer support. Refer to the product packaging or the official Maxxima website para obter as informações de contato mais atualizadas.
