Sunco Lighting 4ft LED Shop Light Instruction Manual

1. Informações importantes de segurança

Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

• AVISO: Risco de choque elétrico. Desligue a energia no fusível ou disjuntor antes da instalação ou manutenção.
• AVISO: Risk of fire. Keep combustible materials away from the lamp.
• This fixture is intended for indoor use only. Do not use in wet locations or where directly exposed to water.
• Garantir o fornecimento voltage is compatible with the fixture's requirements (120V-277V).
• Todas as ligações elétricas devem ser feitas de acordo com as normas elétricas locais e nacionais. Em caso de dúvida sobre a fiação, consulte um eletricista qualificado.
• Não tente modificar ou desmontar o dispositivo. Não há peças que possam ser reparadas pelo usuário em seu interior.

2. O que está na caixa

Verifique se todos os componentes estão presentes antes de iniciar a instalação:

• LED Shop Light Fixture(s)
• Acessórios de montagem (parafusos, buchas)
• Linking Cables (1.5" and 8" for daisy-chaining)
• Porcas de Arame

3. Especificações

The fixture features a durable build with an impact-resistant prismatic lens for wide and consistent light dispersion.

This image illustrates key features including impact resistance, the prismatic lens design, non-dimmable functionality, and the wide voltage compatibility of 120-277V.

4. Configuração e instalação

Siga estes passos para uma instalação correta. Certifique-se de que a energia esteja desligada antes de começar.

4.1. Prepare-se para a instalação

1. Desligue a alimentação: Locate the circuit breaker controlling the installation area and turn off the power.
2. Remover o difusor: Gently remove the prismatic diffuser from the lamp base to access the internal components.
3. Selecione a temperatura de cor (CCT): Before mounting, locate the CCT switch inside the fixture. Select your desired color temperature (4000K, 5000K, or 6000K). This setting cannot be changed easily after installation.

This image shows the internal CCT switch, allowing selection between 4000K, 5000K, and 6000K before installation.

4.2. Montagem do acessório

The fixture is designed for flush mounting to a ceiling or surface. It includes keyhole slots for easy installation.

1. Pontos de montagem de marca: Hold the fixture in the desired mounting location and mark the positions for the mounting screws. Ensure these align with a junction box or suitable support structure.
2. Instalar o hardware de montagem: Drill pilot holes if necessary and install the provided mounting screws, leaving a small gap for the fixture to slide onto.
3. Preparar a fiação: If connecting to a junction box, knock out the appropriate punch hole on the fixture's housing.

This diagram illustrates the three main steps for installation: securing the housing, connecting electrical wires, and attaching the light fixture.

4.3. Conexão elétrica

1. Fios de conexão: Using the provided wire nuts, connect the fixture's wires to the supply wires: Live (black) to Live, Neutral (white) to Neutral, and Ground (yellow/green) to Ground. Ensure all connections are secure.
2. Fios de fixação: Carefully tuck all wires and wire nuts into the junction box or fixture housing.

4.4. Linking Multiple Fixtures (Daisy Chain)

This fixture supports daisy-chaining to extend lighting coverage. Use the provided linking cables.

1. Connect Linking Cable: Insert one end of a linking cable into the designated port on the first fixture and the other end into the port on the next fixture.
2. Conexões seguras: Ensure linking cables are securely connected and properly routed.

This image demonstrates how to daisy-chain multiple fixtures using the linking cables and highlights the knockout punch hole for electrical connections.

4.5. Etapas Finais

1. Reattach Diffuser: Align one end of the diffuser with the aluminum base and push it into place until it snaps securely.
2. Restaurar energia: Turn the circuit breaker back on to restore power to the fixture.

5. Instruções de operação

The Sunco Lighting LED Shop Light is designed for straightforward operation once installed.

5.1. Seleção da Temperatura de Cor (CCT)

This fixture features a selectable color temperature (CCT) switch, allowing you to choose between 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White) to suit your preference or application. The CCT switch is located inside the fixture and must be set during installation before the diffuser is reattached.

• 4000K: Provides a neutral white light, suitable for offices or general workspaces.
• 5000K: Offers a bright, crisp daylight-like illumination, ideal for tasks requiring high visibility.
• 6000K: Delivers a very bright, cool white light, often preferred for industrial settings or areas needing maximum brightness.

This image displays the internal components and wiring, emphasizing the high efficiency of the LED fixture operating within a 120-277V range.

5.2. Ligar/desligar

The fixture is non-dimmable and operates via a standard wall switch connected to its power supply. Simply toggle the wall switch to turn the light on or off.

6. Manutenção

The Sunco Lighting LED Shop Light requires minimal maintenance. Always ensure power is disconnected before performing any maintenance.

• Limpeza: Wipe the exterior of the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners, as these can damage the finish or lens.
• Inspeção: Periodically inspect the fixture for any signs of damage, loose wiring, or wear. If any issues are found, disconnect power and consult a qualified electrician.
• Sem necessidade de substituição da lâmpada: This fixture uses integrated LEDs, meaning there are no bulbs to replace. The LEDs are designed for a long lifespan of 50,000 hours.

7. Solução De Problemas

If you experience issues with your LED Shop Light, refer to the following common troubleshooting steps:

• A luz não acende:
  • Verifique o disjuntor para garantir que a energia esteja ligada.
  • Verifique se todas as conexões dos fios estão seguras e corretas.
  • Ensure the wall switch is in the ON position.
• A luz pisca:
  • Confirm the fixture is not connected to a dimmer switch, as it is non-dimmable.
  • Verifique se há conexões de fiação soltas.
  • Garantir o fornecimento voltage é estável e está dentro da faixa especificada.
• Temperatura de cor incorreta:
  • The CCT switch must be set before installation. If the diffuser is already installed, carefully remove it to access and adjust the switch.

If these steps do not resolve the issue, contact Sunco Lighting customer support for assistance.

8. Garantia e Suporte

Sunco Lighting stands behind the quality of its products.

• Garantia: This product is backed by a 3-Year Warranty. Please refer to the official Sunco Lighting website or your purchase documentation for full warranty details and terms.
• Suporte ao cliente: For technical assistance, troubleshooting, or warranty claims, please contact Sunco Lighting customer support.