Introdução
The ONKRON TS1140-W TV Floor Stand is designed to securely hold televisions ranging from 26 to 65 inches, with a maximum weight capacity of 35 kg. This stand offers a versatile alternative to wall mounting, eliminating the need for drilling. It features height adjustability and integrated cable management for a clean setup.
Image: The ONKRON TS1140-W TV Floor Stand is compatible with TVs from 26 to 65 inches and supports a maximum weight of 35 kg.
Informações de segurança
- Leia atentamente todas as instruções antes da montagem e utilização.
- Não exceda a capacidade máxima de peso de 35 kg (77 lbs).
- Ensure your TV's VESA mounting pattern is compatible (100x100mm to 400x400mm).
- Assemble the stand on a soft, clean surface to prevent scratches to components or flooring.
- Always use two people for lifting and mounting the television to prevent injury or damage.
- Ensure all screws are tightened securely before placing the TV on the stand and before use.
- For additional stability, especially in households with children or pets, consider attaching the stand to the wall using the provided safety cable.
- Mantenha peças pequenas e materiais de embalagem longe de crianças.
Conteúdo da embalagem
Please verify that all components listed below are present in your package. Refer to the image for a visual guide to the included parts and hardware.
Imagem: Acimaview of all parts and hardware included in the ONKRON TS1140-W TV Floor Stand package.
- Base (1)
- Main Column (1)
- Suportes de montagem de TV (2)
- Kit de ferragens (diversos parafusos, arruelas e espaçadores para montagem de TV)
- Ferramentas de montagem (chaves de boca, chaves Allen)
- Cable Management System Components
- Cabo de segurança (1)
- Soft Inserts for TV protection
Instruções de montagem
- Attach the Base to the Main Column: Secure the base to the bottom of the main column using the provided screws and tools. Ensure all connections are firm and stable.
- Install TV Mounting Brackets: Attach the vertical TV mounting brackets to the main column. These brackets will serve as the attachment point for your television.
- Prepare sua TV:
- Coloque a TV com cuidado, virada para baixo, sobre uma superfície macia e limpa para evitar danos à tela.
- Identifique os orifícios de montagem VESA na parte traseira da sua TV.
- Select the appropriate screws, washers, and spacers from the hardware kit that match your TV's VESA pattern and depth.
- Attach the TV mounting arms to the back of your TV. Ensure they are securely fastened but do not overtighten.
- Monte a TV no suporte:
- With assistance from another person, carefully lift the TV and hook the TV mounting arms onto the vertical brackets on the main column.
- Secure the TV to the stand using the locking screws or mechanisms provided.
- Teste cuidadosamente a estabilidade da TV montada antes de a soltar.asinisso.
- Gerenciamento de cabos: Route your TV cables through the integrated cable management system within the main column to maintain a tidy and organized appearance.
- Fixação opcional na parede: For enhanced stability and safety, especially in active environments or with heavier TVs, use the included safety cable to secure the top of the stand to a wall stud.
Instruções de operação
Ajuste de altura: The ONKRON TS1140-W TV Floor Stand offers height adjustment from 880 mm to 1100 mm. To adjust the TV height, carefully loosen the securing bolts on the main column. With assistance, gently raise or lower the TV to your desired viewing position, then securely tighten the bolts. Always ensure the TV is level after adjustment.
Image: The stand allows for height adjustment of the TV from 88 cm to 110 cm.
Manutenção
- Regularly check all screws and connections to ensure they remain tight and secure. Loose connections can compromise stability.
- Clean the stand with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Inspect the stand periodically for any signs of wear, damage, or deformation. Do not use the stand if any damage is observed.
Solução de problemas
- Stand is wobbly or unstable:
- Certifique-se de que todos os parafusos de montagem estejam totalmente apertados.
- Verify that the TV weight does not exceed the maximum capacity of 35 kg.
- Check that the stand is placed on a flat, level, and stable surface.
- Consider using the provided safety cable to anchor the stand to the wall for enhanced stability.
- TV does not fit the VESA mount:
- Confirm your TV's VESA mounting pattern is within the specified range of 100x100mm to 400x400mm.
- Ensure you are using the correct screws, washers, and spacers from the hardware kit that match your TV's specific requirements.
- Dificuldade em ajustar a altura:
- Loosen the height adjustment bolts sufficiently before attempting to move the TV.
- Ensure no cables are snagged or obstructing the movement mechanism within the column.
Especificações
| Recurso | Detalhe |
|---|---|
| Número do modelo | TS1140-W |
| Marca | ONKRON |
| Tamanhos de TV compatíveis | 26 - 65 polegadas |
| Capacidade máxima de peso | 35 kg (77 libras) |
| Compatibilidade VESA | 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm |
| Faixa de ajuste de altura | 880 mm - 1100 mm (34.6 - 43.3 polegadas) |
| Distância da parede | Aproximadamente 60 mm (2.4 polegadas) |
| Peso do item | 21.4 libras (aproximadamente 9.7 kg) |
| Cor | Branco |
| Fabricante | Evigor international Co., Limited |
| Data da primeira disponibilidade | 10 de março de 2024 |
Image: The stand features universal VESA compatibility from 100x100mm to 400x400mm, with base dimensions of 61.8 cm width and 25.7 cm depth.
Garantia e Suporte
ONKRON products undergo multi-stage quality control to ensure reliability and customer satisfaction. For any questions, assistance with assembly, missing parts, or support needs, please contact ONKRON customer service. Refer to your purchase documentation or the official ONKRON webPara obter detalhes específicos sobre a garantia e informações de contato, consulte o site.
