1. Introdução
Thank you for choosing the Meloght 75W Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new flood light. Please read these instructions thoroughly before use and retain them for future reference.
Produto acimaview
The Meloght 75W Motion Sensor Outdoor Flood Light is designed to provide bright, reliable illumination for outdoor areas such as garages, yards, and patios. Featuring a plug-in design for easy installation, it incorporates advanced motion sensing and dusk-to-dawn capabilities to enhance security and energy efficiency.
Principais características
- Enhanced Detection: Sensitive motion sensor with a detection range of 20-70 feet.
- Vários modos de operação: Includes Dim Mode, Motion Sensor Mode, and Dusk to Dawn (D2D) Mode.
- Instant Plug and Play: Portable plug-in design (100-120V standard output) for simple installation without complex wiring.
- Alto Brilho: 75W, 7500LM output, illuminating up to 1150 sq. ft.
- Weatherproof Reliability: IP65 waterproof rating for outdoor use in various weather conditions. (Note: The plug is not waterproof and requires protection).
- Design ajustável: Multi-directional light heads and sensor for optimal coverage.
2. Informações de segurança
Observe as seguintes precauções de segurança para evitar ferimentos ou danos ao produto:
- Desligue sempre a energia antes de instalar, realizar manutenção ou limpar a luminária.
- Certifique-se de que a fonte de alimentação voltage matches the product's requirements (100-120V).
- Do not look directly into the LED light source when illuminated, as it may cause eye strain or damage.
- The product is rated IP65 waterproof for the fixture itself. However, the plug is not waterproof. Ensure the plug connection is protected from direct water exposure when installed outdoors.
- Mount the fixture securely to a stable surface according to the installation instructions.
- Do not attempt to modify or disassemble the product. Contact qualified personnel for repairs.
- Mantenha os materiais de embalagem longe das crianças.
3. Conteúdo da embalagem
Verifique se todos os componentes estão presentes antes da instalação:
- Meloght 75W Motion Sensor Outdoor Flood Light (Model MESLB75DW) x 1
- Mounting Hardware (screws, anchors) x 1 set
- Manual de instruções x 1
Image 3.1: Meloght 75W Motion Sensor Outdoor Flood Light. This image displays the complete flood light unit with its three adjustable LED panels, central motion sensor, and integrated power cord with a standard plug.
4. Especificações
| Recurso | Especificação |
|---|---|
| Marca | Meloght |
| Nome do modelo | MESLB75DW |
| O quetage | 75 Watts |
| Fluxo Luminoso | 7500 Lúmens |
| Área de Iluminação | Até 1150 pés quadrados. |
| Fonte de energia | Elétrico com fio (100-120V) |
| Material | Alumínio |
| Cor | Preto |
| Dimensões do produto | 10.7"C x 5.8"L x 4.7"A |
| Peso do item | 2.31 libras |
| Nível de resistência à água | IP65 (fixture only, plug not waterproof) |
| Alcance de detecção do sensor de movimento | 20-70 pés |
| Ângulo de detecção do sensor de movimento | 180 graus |
| Cor clara | Branco luz do dia |
| Tipo de instalação | Montagem na parede, montagem no beiral |
Image 4.1: Product Dimensions and Adjustable Components. This image illustrates the overall dimensions of the flood light and highlights the 350-degree adjustable light heads, 110-degree adjustable motion sensor, and 90-degree adjustable light panels.
5. Configuração e instalação
The Meloght flood light features a plug-in design for straightforward installation. Follow these steps for proper setup:
Mounting Location Selection
- Choose a suitable outdoor location for mounting, such as a wall or soffit, ensuring it provides the desired illumination coverage.
- Ensure the location is within reach of a standard 100-120V outdoor power outlet that can be protected from weather.
- For optimal motion detection, mount the light where the sensor has an unobstructed view of the area to be monitored. Avoid aiming the sensor at heat sources or reflective surfaces that could cause false triggers.
Etapas de instalação
- Prepare a superfície de montagem: Mark the desired mounting points for the bracket on the wall or soffit.
- Instale o suporte de montagem: Use the provided screws and anchors to securely attach the mounting bracket to the surface.
- Fixe a luminária: Align the flood light with the installed bracket and secure it firmly.
- Ajuste os faróis e o sensor: Loosen the adjustment screws on the light heads and motion sensor to position them for optimal coverage and detection. Tighten the screws once adjusted.
- Conectar à energia: Plug the power cord into a protected 100-120V outdoor electrical outlet. Ensure the outlet is weatherproof or the plug connection is otherwise shielded from moisture.
Image 5.1: Easy Plug-in Installation. This image demonstrates the simplicity of installing the flood light by mounting it to a wall or post and plugging it into an outdoor electrical outlet.
6. Instruções de operação
The Meloght flood light offers multiple operating modes and adjustable settings. The control dials are located on the underside of the motion sensor unit.
Discos de controle
- TIME Dial: Adjusts how long the light stays on after motion is detected (typically 10 seconds to 10 minutes).
- LUX/D2D Dial: Sets the ambient light level at which the sensor becomes active. Turn towards the sun icon for daytime operation (Test Mode) or towards the moon icon for night-only operation (Dusk to Dawn).
- SENS (Sensitivity) Dial: Adjusts the motion sensor's detection range and sensitivity.
Modos de operação
The flood light supports the following modes:
- Modo de sensor de movimento: The light activates at 100% brightness when motion is detected in low light conditions and turns off after a set duration (adjustable via TIME dial) once motion ceases.
- Modo de escurecimento: In low light conditions, the light stays on continuously at a low brightness level (10-30%). When motion is detected, it brightens to 100% for a set duration, then returns to the dim state after motion ceases.
- Modo Crepúsculo ao Amanhecer (D2D): The flood light automatically turns on at dusk and off at dawn, providing continuous illumination throughout the night. Motion sensing is typically overridden or integrated differently depending on the specific D2D setting.
- Modo de teste: Used during installation to verify motion sensor functionality. Set the LUX dial to the 'sun' icon and TIME to minimum. The light will activate with motion regardless of ambient light.
Image 6.1: Motion Sensor Mode. This image illustrates the flood light activating to 100% brightness when people are detected, with control dials for TIME, LUX, and SENS.
Image 6.2: Dim Mode. This image shows the flood light operating at a low brightness (10-30%) and increasing to 100% upon motion detection, with control dials for TIME, LUX, and SENS.
Image 6.3: Dusk to Dawn Mode. This image depicts the flood light automatically turning on at dusk and off at dawn, with control dials for TIME, LUX, and SENS.
Image 6.4: Test Mode. This image shows a person walking past the flood light, which is illuminated, indicating the motion sensor is being tested. The control dials for TIME, LUX, and SENS are visible.
7. Manutenção
A manutenção regular garante o desempenho ideal e a longevidade do seu refletor.
- Limpeza: Limpe periodicamente a luminária e a lente do sensor de movimento com um pano macio e seco.amp cloth. Do not use abrasive cleaners or solvents. Ensure the power is disconnected before cleaning.
- Inspeção: Regularly inspect the power cord and plug for any signs of damage. Check mounting screws for tightness.
- Proteção contra intempéries: While the fixture is IP65 rated, ensure the plug connection remains protected from direct rain or snow. Consider using a weatherproof outlet cover.
8. Solução De Problemas
If you encounter issues with your Meloght flood light, refer to the following common problems and solutions:
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende à noite. | No power; LUX setting too high; Sensor obstructed. | Check power connection. Adjust LUX dial towards 'moon' icon. Clear any obstructions from the sensor. |
| A luz permanece acesa continuamente. | Continuous motion detected; LUX setting too low (towards 'sun'); Wiring issue. | Ensure no constant motion in detection area. Adjust LUX dial towards 'moon' icon. If hardwired, check wiring. |
| Light flashes or cycles on/off rapidly. | Interference; Power fluctuations; Sensor malfunction. | Check for nearby heat sources or reflective surfaces. Ensure stable power supply. If problem persists, contact support. |
| O alcance do sensor de movimento é muito curto/longo. | SENS dial setting; Sensor angle. | Adjust the SENS dial. Reposition the motion sensor head for optimal coverage. |
| A luz acende durante o dia. | LUX setting too low (towards 'sun'). | Adjust the LUX dial towards the 'moon' icon to ensure it only activates in low light. |
Se as etapas de resolução de problemas não resolverem o problema, entre em contato com o suporte ao cliente.
9. Garantia e Suporte
Informações de garantia
The Meloght 75W Motion Sensor Outdoor Flood Light (Model MESLB75DW) comes with a Garantia de 2 ano A garantia é válida a partir da data da compra. Esta garantia cobre defeitos de materiais e de fabricação sob uso normal. Não cobre danos causados por instalação inadequada, uso indevido, acidentes, reparos não autorizados ou fenômenos naturais.
Suporte ao cliente
For technical assistance, warranty claims, or any questions regarding your product, please contact Meloght customer support through the retailer's platform or the official Meloght website. Please have your model number (MESLB75DW) and proof of purchase ready when contacting support.
