Produto acimaview
The WALI GSMU001XL is a heavy-duty single monitor gas spring desk mount designed to support ultrawide or curved LCD/LED screens ranging from 17 inches to 49 inches. It can hold monitors weighing up to 44 lbs and is compatible with VESA mounting patterns of 75x75mm and 100x100mm. This mount offers full adjustability for optimal viewing angles and includes integrated USB Type-C and USB Type-A 3.0 ports for convenient connectivity.
The mount features a two-stage locking system, supporting both C-clamp and Grommet Base installations on desks with a thickness between 0.47 inches and 1.97 inches.
Conteúdo da embalagem
Before beginning installation, please ensure all components are present and undamaged. If any parts are missing or damaged, contact WALI customer support.
- 1 x WALI Ultrawide Monitor Desk Mount (GSMU001XL)
- Mounting Hardware Kit (screws, washers, spacers, Allen wrenches)
- Manual do usuário
Configuração e instalação
Follow these steps carefully to install your WALI GSMU001XL monitor mount. Two installation methods are available: C-clamp e base com ilhós.
Etapa 1: Escolha o método de montagem
Determine whether to use the C-clamp or Grommet Base. Both methods are compatible with desk thicknesses from 0.47 inches to 1.97 inches.
Step 2: Assemble the Base and Arm
Assemble the base according to your chosen mounting method (C-clamp or Grommet Base). Attach the lower arm section to the base.
Etapa 3: Fixe a placa VESA ao monitor
Attach the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
Passo 4: Monte o monitor no braço.
Carefully slide the monitor (with the attached VESA plate) onto the upper arm section. Ensure it locks into place. It is recommended to have assistance when mounting heavier monitors.
Step 5: Connect USB Cables
Connect the integrated USB Type-C and USB Type-A 3.0 ports on the mount to your computer using the provided cables. Route cables through the arm's cable management channels for a tidy setup.
Operando o braço do monitor
The WALI GSMU001XL monitor arm offers extensive adjustability to achieve an ergonomic viewposição de entrada.
Ajustando a posição do monitor
The arm allows for the following movements:
- Inclinar: Ajuste o ângulo do monitor de +50° para -20°.
- Giratório: Rotate the monitor horizontally up to +90°/-90°.
- Rotação: Gire o monitor 360° para alternar entre os modos paisagem e retrato.
- Ajuste de altura: The gas spring arm allows for a height range of 9.09 inches to 19.69 inches.
- Extensão: The arm can extend up to 21.93 inches.
Ajuste de tensão da mola a gás
The gas spring tension must be adjusted to match your monitor's weight for proper balance and movement. Use the provided Allen wrench to adjust the tension screw located on the arm.
- To adjust for lighter monitors or if the monitor floats up: Turn the tension screw sentido horário.
- To adjust for heavier monitors or if the monitor sags down: Turn the tension screw sentido anti-horário.
Ajuste gradualmente até que o monitor permaneça na posição ao ser solto.
Manutenção
To ensure the longevity and proper function of your WALI monitor arm, follow these simple maintenance guidelines:
- Limpeza: Wipe the arm and base with a soft, damp pano. Evite produtos de limpeza abrasivos ou solventes que possam danificar o acabamento.
- Verificações periódicas: Verifique periodicamente todos os parafusos e conexões para garantir que permaneçam firmes. Reaperte-os, se necessário.
- Mola a gás: The gas spring is designed for long-term use and typically requires no maintenance. If you notice changes in its performance, refer to the troubleshooting section.
Solução de problemas
Se você tiver problemas com o braço do monitor, consulte os problemas e soluções comuns a seguir:
Problem: Monitor Sags or Drops
Solução: The gas spring tension is likely too low for your monitor's weight. Turn the tension screw sentido anti-horário to increase tension until the monitor holds its position.
Problem: Monitor Floats Up or is Difficult to Push Down
Solução: The gas spring tension is likely too high for your monitor's weight. Turn the tension screw sentido horário to decrease tension until the monitor holds its position.
Problem: Monitor is Unstable or Wobbles
Solução:
- Certifique-se de que todos os parafusos de montagem (da mesa) estejam bem presos.amp/grommet, VESA plate, arm connections) are securely tightened.
- Verify that your desk is stable and can support the weight of the mount and monitor.
Problem: USB Ports Not Functioning
Solução:
- Ensure the USB cables from the monitor arm are properly connected to your computer's USB ports.
- Test with different USB devices or computer ports to rule out device or port issues.
If problems persist after attempting these solutions, please contact WALI customer support.
Especificações
| Recurso | Especificação |
|---|---|
| Número do modelo | GSMU001XL |
| Marca | WALI |
| Compatibilidade de tamanho do monitor | 17" to 49" Ultrawide/Curved |
| Capacidade de peso | Até 44 libras (20 kg) |
| Compatibilidade VESA | 75x75mm, 100x100mm |
| Compatibilidade com a espessura da mesa | 0.47" - 1.97" (1.2 cm - 5 cm) |
| Tipo de montagem | C-clampBase com ilhós |
| Ângulo de inclinação | +50° / -20° |
| Ângulo de giro | +90° / -90° |
| Rotação | 360° (Paisagem para Retrato) |
| Faixa de altura | 9.09" - 19.69" (23.1 cm - 50 cm) |
| Extensão máxima do braço | 21.93" (55.7 cm) |
| Portos Integrados | 1 x USB Type-C, 1 x USB Type-A 3.0 |
| Material | Alumínio |
| Cor | Preto |
Vídeo do produto
Garantia e Suporte
For warranty information or technical assistance, please contact WALI customer support. WALI provides experienced and friendly US-based customer support available to assist 7 days a week.
Refer to the product packaging or the official WALI webPara obter as informações de contato e os termos de garantia mais recentes, visite o site.
