1. Introdução
This manual provides essential instructions for the safe and effective operation of your GOOLOO GT4000S Jump Starter and GOOLOO GT150 Tire Inflator. Please read this manual thoroughly before use and retain it for future reference.
Image: The GOOLOO GT4000S Jump Starter (yellow and black unit with clamps) and the GOOLOO GT150 Tire Inflator (black rectangular unit with digital display).
2. Informações importantes de segurança
Observe sempre as seguintes precauções de segurança para evitar ferimentos ou danos ao dispositivo e ao veículo:
- Leia todas as instruções antes de usar.
- Do not operate the jump starter if the cables or clamps estão danificados.
- Ensure correct polarity connection (red to positive, black to negative) to avoid sparks or damage.
- Do not jump start vehicles with battery voltage diferente de 12V.
- Mantenha fora do alcance de crianças.
- Do not expose to rain or extreme temperatures.
- Do not use the tire inflator for purposes other than inflating tires or compatible items.
- Avoid over-inflating tires; always check recommended PSI.
3. Produto acabadoview
3.1 GOOLOO GT4000S Jump Starter
- Peak atual: 4000A
- Compatibilidade do motor: Até 12.0 litros de gasolina, 10.0 litros de diesel.
- Carregamento: 100W Fast-Charging (1.2 hours for full charge, 5 minutes for a single jumpstart). Type-C port for charging.
- Saída: Up to 100W for charging MacBooks and other laptops (Type-C port only).
- Duração da bateria: Up to 60 jumpstarts on a single full charge.
- Compatibilidade: Suitable for RVs, pickup trucks, motorcycles, SUVs, tractors, boats, and other 12V vehicles.
Image: The GOOLOO GT4000S Jump Starter connected to a car battery in an engine bay, illustrating its primary function.
3.2 GOOLOO GT150 Tire Inflator
- Pressão Máxima: 150 PSI
- Velocidade da inflação: Inflates a completely flat 205/55 R16 car tire (0-36PSI) in approximately 7 minutes.
- Características: Auto-shutoff, cordless design, portable size, ultra-bright LED screen for clear display.
- Compatibilidade: Suitable for car tires, SUV tires, motorcycle tires, bicycle tires, balls, kayaks, and swim rings.
Image: The GOOLOO GT150 Tire Inflator connected to a car tire, demonstrating its inflation capability.
4. Configuração e carregamento
4.1 Charging the GT4000S Jump Starter
- Connect the provided USB-C cable to the jump starter's Type-C input port.
- Connect the other end of the USB-C cable to a 100W fast-charging wall adapter (not included, unless specified in package contents) or a compatible car charger.
- The display will show the charging wattage e porcentagem da bateriatage. A full charge from 0% to 100% typically takes 1.2 hours with a 100W charger.
Image: The GOOLOO GT4000S Jump Starter being charged via its USB-C port inside a vehicle, highlighting its fast-charging capability.
4.2 Charging the GT150 Tire Inflator
The GT150 Tire Inflator is charged via its USB-C port. Connect it to a compatible USB-C charger. The LED screen will indicate the charging status.
Image: The GOOLOO GT150 Tire Inflator connected to a smartphone via a USB cable, demonstrating its power bank functionality.
5. Instruções de operação
5.1 Using the GT4000S Jump Starter
- Ensure the jump starter is sufficiently charged (above 20%).
- Conecte o cabo jumper clamps to the jump starter unit.
- Anexe o cl vermelhoamp ao terminal positivo (+) da bateria do veículo e ao terminal pretoamp ao terminal negativo (-).
- Turn on the jump starter. The screen should display "READY" if the connection is correct and the battery is detectable.
- If the battery is completely dead or too low to detect, press the "BOOST" button for 1-2 seconds until "READY" is displayed. This forces the jump starter to provide maximum output.
- Ligue o motor do seu veículo em até 30 segundos.
- Assim que o veículo ligar, remova imediatamente o clamps from the car battery, then disconnect them from the jump starter.
Video: Official GOOLOO demonstration on how to jump start a car using a GOOLOO jump starter. This video illustrates the connection process and starting the vehicle.
5.2 Using the GT150 Tire Inflator
- Connect the air hose to the GT150 inflator and then securely attach it to the tire valve stem.
- Turn on the GT150. The LED screen will display the current tire pressure.
- Use the '+' and '-' buttons to set the desired target pressure.
- Press the power button to start inflation. The inflator will automatically stop once the target pressure is reached.
- Disconnect the air hose and store the unit.
Image: The GOOLOO GT150 Tire Inflator's LED screen showing both the real-time and preset tire pressure values, indicating its auto-shutoff feature.
6. Manutenção e armazenamento
- Store the units in a cool, dry place away from direct sunlight and moisture.
- Recharge the jump starter every 3-6 months to maintain battery health, even if not used.
- Clean the units with a dry, soft cloth. Do not use harsh chemicals.
7. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Jump Starter not turning on | Low battery or faulty unit | Charge the unit fully. If issue persists, contact support. |
| "READY" not displayed (GT4000S) | Incorrect connection or battery too low | Verifique clamp connections. Use "BOOST" function for completely dead batteries. |
| Tire Inflator not working (GT150) | Low battery, hose not connected properly | Charge the unit. Ensure hose is securely attached to tire valve. |
8. Especificações
GOOLOO GT4000S Auxiliar de partida
- Pico Ampidade: 4000A
- Volumetage: 12V
- Tipo de Bateria: Íon de lítio
- Entrada de carregamento: USB-C (100W Max)
- Saída USB: USB-C (100W Max), USB-A (various outputs)
GOOLOO GT150 Tire Inflator
- Pressão Máxima: 150 PSI
- Fonte de energia: Cordless (Internal Battery)
- Mostrar: Ultra Bright LED Screen
9. Garantia e Suporte
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official GOOLOO website. Please have your model numbers (GT4000S, GT150) ready when contacting support.
