Introdução
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Faber 60 cm 1500 m³/hr Autoclean Kitchen Chimney, model HOOD DAZZLE BLDC FL HC BK 60. Please read these instructions carefully before using the appliance and retain them for future reference.
Imagem: Frontal em ângulo view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showcasing seu design geral.
Instruções importantes de segurança
- Certifique-se de que a chaminé seja instalada por um técnico qualificado, de acordo com as normas locais.
- Do not operate the chimney if the power cord is damaged. Contact authorized service personnel for repairs.
- Mantenha a ventilação adequada no cômodo quando a chaminé estiver em uso, especialmente se houver outros aparelhos a combustível em funcionamento.
- Clean the chimney regularly to prevent grease buildup, which can be a fire hazard.
- Não flambe debaixo da chaminé.
- Mantenha as crianças afastadas do aparelho durante o funcionamento e a limpeza.
- Desligue a fonte de alimentação antes de qualquer limpeza ou manutenção.
Configuração e instalação
The Faber HOOD DAZZLE BLDC FL HC BK 60 is a wall-mounted kitchen chimney. Proper installation is crucial for optimal performance and safety.
Desembalagem e componentes
Carefully unpack the chimney and check for any damage. The package should contain:
- 1 x Faber Kitchen Chimney unit
- 1 x Manual do Usuário
- Installation hardware (screws, wall plugs, etc. - typically included)
Montagem
This chimney is designed for wall-mounted installation. Ensure the wall is strong enough to support the appliance's weight (approximately 18 kg). The recommended mounting height above the cooking surface should be followed as per local safety standards and the chimney's specifications to ensure effective suction and safety.
Imagem: Frente view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showcasinSeu design elegante em preto e painel de controle.
Image: Side angled view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showing its profile and exhaust duct cover.
Imagem: Parte inferior view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showing the filterless intake area.
Conexão elétrica
The chimney operates on 230 Volts. Ensure the electrical outlet is properly grounded and meets the required specifications. It is recommended to have a dedicated circuit for the appliance.
Instruções de operação
Your Faber chimney features advanced controls for ease of use, including touch, gesture, and remote control options.
Painel de controle encerradoview
The control panel is located on the front of the chimney. It includes touch-sensitive buttons for various functions and an LED display.
Imagem: Angulada view of the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, highlighting the touch and gesture control panel.
Image: Close-up of the control panel on the Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney, showing power, light, and speed settings.
Funções
- Ligar/desligar: Use the dedicated power button on the control panel or remote.
- Suction Speed Adjustment: Adjust the suction power up to 1500 m³/hr using touch controls, gestures, or the remote. Higher speeds are recommended for heavy cooking.
- Iluminação LED: The chimney is equipped with LED lights to illuminate your cooking area. Activate them via the control panel or remote.
- Limpeza automática por calor: This feature automatically cleans the internal components by heating and melting grease, which then collects in an oil collector. Refer to the Maintenance section for details.
Controle remoto
The included remote control allows for convenient operation from a distance. It typically includes buttons for power, light, and suction speed adjustment.
Image: A hand holding the remote control for the Faber chimney, demonstrating its use for simplified cooking.
Image: Illustration of gesture control functionality for the Faber chimney, showing hands interacting with the sensor area.
Manutenção e Limpeza
Regular maintenance ensures the longevity and optimal performance of your Faber chimney. Always disconnect the power supply before cleaning.
Heat Auto Clean Function
The Heat Auto Clean feature is designed to simplify internal cleaning. When activated, a heating element melts accumulated grease, which then flows into a removable oil collector. It is recommended to run the auto-clean cycle periodically, depending on your cooking frequency.
- To activate, press the dedicated Auto Clean button on the control panel or remote.
- The cycle duration may vary. Do not interrupt the process.
- After the cycle, carefully remove and empty the oil collector. Clean it with warm soapy water.
Image: Illustration depicting the auto-clean technology of the Faber chimney, showing grease being collected in the oil collector.
Limpeza externa
Wipe the exterior surfaces of the chimney with a soft cloth dampened with mild detergent. Avoid abrasive cleaners or scouring pads, as they can damage the matte black finish.
Tecnologia sem filtro
This chimney utilizes filterless technology, reducing the need for frequent filter cleaning or replacement. The internal design and auto-clean function manage grease collection efficiently.
Guia de solução de problemas
Antes de entrar em contato com o serviço de atendimento ao cliente, consulte os problemas e soluções mais comuns a seguir:
| Problema | Possível causa | Solução |
|---|---|---|
| A chaminé não liga. | No power supply; loose connection; power outage. | Check power cord connection. Verify power outlet functionality. Check household circuit breaker. |
| Baixo poder de sucção. | Oil collector full; obstruction in ducting; incorrect speed setting. | Empty and clean the oil collector. Ensure ducting is clear. Increase suction speed. |
| Ruído incomum durante a operação. | Componentes soltos; objeto estranho na ventoinha; problema no motor. | Ensure all parts are securely fastened. If noise persists, contact service. |
| Auto Clean function not working. | Power issue; sensor malfunction. | Ensure power supply is stable. If issue persists, contact service. |
If the problem persists after attempting these solutions, please contact Faber customer support.
Especificações do produto
| Nome do modelo | HOOD DAZZLE BLDC FL HC BK 60 |
| Marca | Faber |
| Tipo de montagem | Montado na parede |
| Largura | 60 centímetros |
| Poder de sucção | 1500 m³/hr (Cubic Meters Per Hour) |
| Tipo de filtro | Sem filtro |
| Tipo de função | Heat Auto Clean |
| Terminar | Preto fosco |
| Controles | Touch & Gesture with Remote control |
| Dimensões do produto (LxPxA) | 59.7 x 45.5 x 51.2 cm (597x455x512 MM) |
| Volumetage | 230 Volts |
| Peso do item | 18 quilos |
| Nível de ruído | 56 decibéis |
| Tipo de fonte de luz | LIDERADO |
| Consumo anual de energia | 180 quilowatts |
| Fabricante | Franke Faber India Pvt Ltd |
Informações de garantia
Your Faber HOOD DAZZLE BLDC FL HC BK 60 Kitchen Chimney comes with a comprehensive warranty:
- Garantia do produto: 5 anos
- Garantia do motor: 12 anos
Please retain your purchase receipt for warranty claims. The warranty covers manufacturing defects under normal use conditions. For detailed terms and conditions, refer to the warranty card included with your product or contact Faber customer service.
Suporte ao cliente
For any queries, technical assistance, or service requests regarding your Faber kitchen chimney, please contact Faber customer support. You can find contact details on the Faber official website ou seu cartão de garantia.
Manufacturer: Franke Faber India Pvt Ltd
