1. Introdução
Obrigado pela compra.asing the KGUSS Topping B100 Mono Pure Power Amplifier. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use to ensure optimal performance and safety.
2. Informações de segurança
- Não exponha este dispositivo à chuva ou umidade.
- Não desmonte a unidade. Encaminhe todos os serviços de manutenção para pessoal qualificado.
- Garanta ventilação adequada para evitar superaquecimento.
- Use only the provided power adapter and cable.
- Mantenha o dispositivo longe de fontes de calor, luz solar direta e campos magnéticos fortes.
3. Conteúdo da embalagem
Verifique se todos os itens estão presentes na embalagem:
- TOPPING B100 Mono Power Ampmais vivo
- Adaptador de energia CA para CC
- Cabo CA
- Cartão de informações do produto
Imagem: Diagram showing a stereo setup with two B100 units and a list of included accessories.
4. Produto acabadoview
4.1 Painel Frontal
Imagem: Diagram of the B100 front panel with labeled components.
- Indicador de energia: Mostra o status de energia.
- Interruptor de alimentação: Touch to turn on the unit; touch and hold to enter standby state.
- Balanced Combo Input (XLR + 6.35mm TRS): Input for balanced audio sources.
- Interruptor de entrada: Selects between balanced and single-ended inputs.
- Single-Ended Input (RCA): Input for single-ended audio sources.
- + Speaker Output (4mm jack): Positive terminal for speaker connection.
- - Speaker Output (4mm jack): Negative terminal for speaker connection.
- Gain Setting (H/M/L): Ajusta o amplifier's gain level.
- Firmware Upgrade Interface: USB-C port for firmware updates only.
- 12V Trigger In (3.5mm jack): For synchronized power on/off with other devices.
- Power Input (DC38V): Conecta-se ao adaptador de energia.
4.2 Painel traseiro
Imagem: Diagram of the B100 rear panel with labeled input/output ports and controls.
5. Configuração
5.1 Conectando à energia
It is recommended to first connect the power adapter to the unit's power port, and then turn on the power. Use the provided AC to DC power adapter and AC cable.
5.2 Conectando as fontes de entrada
The B100 supports both balanced (XLR/TRS) and single-ended (RCA) inputs.
- Connect your audio source (e.g., DAC, preamp) para o BAL (XLR/TRS combo) or SE (RCA) input ports on the rear panel.
- Use o Interruptor de entrada on the front panel to select the corresponding input.
5.3 Conectando alto-falantes
The B100 features speaker terminals compatible with banana plugs, bare wire, or Y-insertion.
- Plugues de banana: Insira o plugue banana na extremidade do terminal correspondente.
- Bare Wire/Y-insertion: Unscrew the crystal case counter-clockwise. Insert stripped metal speaker wires into the round holes or Y-terminals around the periphery of the posts. Do not let bare speaker wires touch each other or the case of this unit. Finally, tighten the crystal case.
- Ensure correct polarity (+ to + and - to -) for each speaker.
Imagem: Detailed diagram showing how to connect input sources and speakers to the B100 ampmais vivo.
5.4 12V Trigger Connection
The B100 is equipped with a 12V Trigger input interface, allowing for linked power on/off with other devices. Connect a 3.5mm trigger cable from a compatible device to the Gatilho 12V port on the B100's rear panel. This enables simultaneous turn on or off of all devices that support this feature.
5.5 Stereo System Setup
When building a stereo system, two B100 units are required to drive two passive speakers respectively. Each B100 will handle one channel (left or right) from your DAC/preamp.
6. Operação
6.1 Power On/Off/Standby
Toque o Interruptor de energia on the front panel to turn the unit on. Touch and hold the Interruptor de energia para entrar no modo de espera.
6.2 Seleção de entrada
Use o Interruptor de entrada on the front panel to toggle between the balanced (BAL) and single-ended (SE) inputs.
6.3 Ajuste de ganho
The B100 provides three gain adjustments: H (Alto), M (Medium), and L (Low). Select the appropriate gain level based on your speakers' sensitivity and listening preferences.
6.4 Controle de volume
The B100 is a pure power amplifier and does not feature its own volume control. Volume adjustment should be managed by your connected preamplifier or DAC with preamp funcionalidade.
7. Manutenção
- Limpe o aparelho com um pano macio e seco. Não utilize produtos de limpeza líquidos ou aerossóis.
- Avoid blocking the ventilation slots to ensure proper heat dissipation.
- Desconecte o adaptador de energia se o aparelho não for utilizado por um período prolongado.
8. Solução De Problemas
If you encounter any issues with your B100 amplifier, please refer to the table below or watch the troubleshooting video for guidance.
Imagem: Troubleshooting table for common issues with the B100 ampmais vivo.
| Fenómeno | Solução |
|---|---|
| Can't be turned on | Check the power adapter. Only connect the power adapter to a power outlet, not to the unit. If the LED on the adapter blinks or does not light up, the adapter is defective. Check the power connection. |
| Sem som | The device did not power on. Check LED and the power connection. Check that the proper input source is selected in the rear panel. Check the connections for all devices. Insert connection cables all the way in. Check the volume of all devices. |
| Som anormal | One channel's positive output and negative output may be reversed, please check and correct it. The cables may not be connected correctly, check and reconnect them. Probably overloaded. Try turning down the volume of the source or turning down the gain on the B100. Check to see if the problem is with the source, downstream equipment and cables. |
| Fault code A=2, B=2 or A=2, B=3 | Firmware is abnormal. Unplug the power cable and plug in the USB-C to the FW port and plug in the USB-C to the FW port to the unit. |
| Fault code A=1, B=1 or A=1, B=2 | Negative and positive voltage abnormal. Check the power adapter. Only connect the power adapter to a power outlet, not to the unit. If the LED on the adapter blinks or does not light up, the adapter is defective. Check the power connection. If the problem still persists after disconnecting the other devices and restarting it, the unit may be defective. Please contact the store where you purchased it. |
| Fault code A=1, B=3 | Amplifier circuit outputs abnormal DC voltage. After changing the song, turning down the source volume and turning down the gain of the unit, unplug and re-plug the power cable and reboot the unit. If the problem still persists after disconnecting the other devices and restarting it, the unit may be defective. Please contact the store where you purchased it. |
| Fault code A=1, B=4 | The protection circuit has been activated due to a rise in temperature within this unit. Reboot B100 after the unit cools down. Please put the unit in a place having good ventilation. |
| Fault code A=1, B=5 | Too low load impedance or short-circuit load. Check if the output is short-circuited, the load impedance is too low or the load is short-circuited. |
| The usage of the USB port | For firmware upgrade only. |
8.1 Troubleshooting Video
Vídeo: A short troubleshooting guide for common issues with the TOPPING B100 amplifier, provided by HIFI College.
9. Especificações
The following table details the technical specifications of the KGUSS Topping B100 Mono Pure Power Ampmais vital:
Imagem: Detailed table outlining the electrical and performance specifications of the B100 ampmais vivo.
| Especificação | Valor |
|---|---|
| Dimensões do produto | 7.87 x 5.79 x 1.73 polegadas |
| Peso do item | 4.4 libras |
| Número do modelo do item | TOPPING B100 |
| Fabricante | COBERTURA |
| THD+N @1kHz (A-peso) | <0.00008% @4Ω 5W (BAL), <0.00008% @8Ω 5W (SE) |
| SNR (A-peso) | 151dB (BAL), 149dB (SE) |
| Faixa Dinâmica @1kHz (A-wt) | 151dB (BAL), 149dB (SE) |
| Potência de saída | 100W @4Ω THD+N<1% (BAL), 100W @4Ω THD+N<1% (SE) |
| Impedância de carga | ≥4Ω |
10. Garantia e Suporte
KGUSS is committed to customer satisfaction. Your TOPPING B100 amplifier comes with:
- Garantia de reembolso de 30 dias por qualquer motivo.
- More than 1 year quality restoration, covering repair and shipping costs for quality defects.
- 30-day price matching.
For any questions or support, please contact HIFI College, the authorized retailer, who is ready to answer any questions 24/7.
