AT&T Internet Air 5G Gateway NCM1120D2 User Manual

1. Terminadoview

The AT&T Internet Air 5G Gateway (Model NCM1120D2) provides ultra-fast internet connectivity powered by AT&T's 5G network. Designed for business internet data plans, this gateway is Wi-Fi 7 Ready, offering lower latency and increased bandwidth for multiple devices. Its plug-and-play design allows for quick internet access, and an intuitive web interface de usuário (Web UI) enables easy network customization. The device supports 4G LTE bands 2, 4, 5, 12, 14, 29, 30, 66, and 5G bands n2, n5, n14, n30, n66, n77. Please note that a Nano SIM card and associated services are not included and must be obtained separately from AT&T.

2. Conteúdo da embalagem

Verifique se todos os itens estão presentes em sua embalagem:

• AT&T Internet Air 5G Gateway (Model NCM1120D2)
• Adaptador de energia

Note: A Nano SIM card and an active AT&T Business Data Plan are required for operation and are not included in this package.

3. Layout do dispositivo

Familiarize yourself with the physical components and indicators of your AT&T Internet Air 5G Gateway.

Figura 1: Frente e Traseira View com componentes rotulados

Indicadores do painel frontal:

• LED 5G: Indica o estado da rede 5G.
• LED 4G: Indicates 4G LTE network status.
• LED Wi-Fi: Indica atividade da rede Wi-Fi.
• SYSTEM LED: Indicates overall system status.

Portas e botões do painel traseiro:

• External Antenna Ports (ANT): Two SMA connectors for optional external antennas.
• Botão WPS: For Wi-Fi Protected Setup.
• 2.5 GbE LAN Port (1): High-speed Ethernet port.
• 1 GbE LAN Ports (2, 3, 4): Standard Ethernet ports.
• Porta de alimentação CC: Conecta-se ao adaptador de energia.
• Botão de redefinição de fábrica: Recessed button to restore factory default settings.
• SIM Card Cover: Protects the SIM card slot.
• Slot para cartão SIM: For inserting the Nano SIM card.
• Ventilação: For device cooling.

4. Configuração

Follow these steps to set up your AT&T Internet Air 5G Gateway:

1. Insira o cartão Nano SIM:
   • Locate the SIM Card Cover on the rear panel.
   • Remova a tampa com cuidado.
   • Insert your activated Nano SIM card into the SIM Card Slot with the gold contacts facing down and the notched corner aligned correctly.
   • Replace the SIM Card Cover securely.
   

   Figure 2: Inserting the Nano SIM Card

2. Conecte o adaptador de energia:
   • Plug the provided power adapter into the DC Power Port on the rear of the gateway.
   • Conecte a outra extremidade do adaptador de energia em uma tomada de parede.
3. Power On and Initial Boot:
   • The gateway will automatically power on.
   • Wait for the SYSTEM LED on the front panel to turn solid white, indicating the device is ready.
   • Observe the 5G and 4G LEDs. A solid white light on either indicates a successful cellular connection.
4. Posicionamento ideal:
   • Place the gateway in an open area, away from obstructions, and preferably near a window for optimal cellular signal reception.
   • Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.
5. Conectar dispositivos:
   • Wi-fi: Use the Wi-Fi network name (SSID) and password found on the device label or in the Web UI to connect your wireless devices.
   • Ethernet: For wired connections, plug an Ethernet cable from your device into any of the LAN ports on the rear of the gateway.

5. Instruções de operação

Compreendendo os indicadores LED:

• Solid White (SYSTEM): Gateway is powered on and operating normally.
• Solid White (5G/4G): Connected to 5G or 4G LTE network.
• Solid White (WiFi): Wi-Fi is active and devices are connected.
• Flashing (Any LED): Indicates activity or a specific status (refer to the full online manual for detailed flashing codes).
• No Light (Any LED): Feature is off or not connected.

Acessando o Web Interface do usuário:

O Web UI allows for advanced configuration and monitoring of your gateway.

1. Connect a device to the gateway via Wi-Fi or Ethernet.
2. Abra um web browser and enter the default gateway IP address (usually 192.168.1.254 or similar, check the device label).
3. Enter the administrator password (found on the device label) to log in.
4. Do Web UI, you can:
   • Change Wi-Fi SSID and password.
   • Configure advanced network settings (e.g., port forwarding, firewall).
   • Monitor connected devices and data usage.
   • Atualizar firmware.

Configuração protegida de Wi-Fi (WPS):

For quick and easy connection of WPS-compatible devices:

1. Press the WPS button on the rear of the gateway.
2. Within two minutes, activate WPS on your client device.
3. Os dispositivos serão conectados automaticamente.

6. Manutenção

• Limpeza: Use a soft, dry cloth to clean the exterior of the gateway. Do not use liquid cleaners or aerosols.
• Ventilação: Ensure the gateway's vents are not obstructed to prevent overheating. Maintain adequate airflow around the device.
• Atualizações de firmware: Regularly check for and install firmware updates via the Web UI to ensure optimal performance and security.
• Reiniciando: If you experience connectivity issues, try restarting the gateway by unplugging the power adapter for 10 seconds and then plugging it back in.

7. Solução De Problemas

• Sem conexão com a Internet:
  • Check if the 5G or 4G LED is solid white. If not, reposition the gateway for better signal.
  • Ensure your Nano SIM card is correctly inserted and activated with an AT&T Business Data Plan.
  • Reinicie o gateway.
• Velocidade de internet lenta:
  • Verify optimal gateway placement.
  • Check for network congestion (too many devices connected or high data usage).
  • Ensure your devices are using the appropriate Wi-Fi band (5GHz for faster speeds, 2.4GHz for wider range).
• Desconexões de Wi-Fi:
  • Verifique se há interferência de outros dispositivos eletrônicos.
  • Ensure your device is within the Wi-Fi range.
  • Update your device's Wi-Fi drivers.
• Restauração de fábrica: If issues persist, a factory reset can resolve many problems. Use a paperclip or similar pointed object to press and hold the recessed Factory Reset Button on the rear panel for about 10 seconds until the LEDs flash. This will erase all custom settings.

8. Especificações

9. Garantia e Suporte

This product is sold as 'Amazon Renewed'. For warranty information and support related to the renewed condition of the device, please refer to the Amazon Renewed program terms and conditions.

For service-related inquiries, data plans, or technical support specific to AT&T Internet Air 5G services, please contact AT&T customer support directly.

You can find additional support resources and the full user manual by visiting the AT&T support website or contacting their customer service.