TOTAL 20V Cordless Brushless Impact Wrench

1. Introdução

Thank you for choosing the TOTAL 20V Cordless Brushless Impact Wrench, Model TIWLI2085. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your tool. Please read it thoroughly before use and keep it for future reference.

Figure 1: The TOTAL TIWLI2085 impact wrench with its 20V battery installed, showcasing its compact design and readiness for operation.

2. Instruções gerais de segurança

Siga sempre as precauções básicas de segurança para reduzir o risco de incêndio, choque elétrico e ferimentos ao operar ferramentas elétricas.

• Segurança da Área de Trabalho: Mantenha sua área de trabalho limpa e bem iluminada. Áreas desorganizadas ou escuras são propícias a acidentes. Não opere ferramentas elétricas em atmosferas explosivas, como na presença de líquidos, gases ou poeira inflamáveis.
• Segurança elétrica: Evite o contato do corpo com superfícies aterradas. Não exponha ferramentas elétricas à chuva ou umidade.
• Segurança pessoal: Use sempre proteção ocular. Use protetores auriculares ao trabalhar por períodos prolongados. Vista-se adequadamente; evite roupas largas ou joias. Prenda o cabelo comprido.
• Uso e cuidados com a ferramenta: Não force a ferramenta elétrica. Use a ferramenta correta para a sua aplicação. Desconecte a bateria da ferramenta elétrica antes de fazer qualquer ajuste, trocar acessórios ou guardar a ferramenta.
• Uso e cuidados com a bateria: Recharge only with the charger specified by the manufacturer. Do not use battery packs with any other power tools. Do not open, crush, or expose battery packs to fire or high temperatures.

3. Produto acabadoview

The TOTAL TIWLI2085 is a powerful 20V cordless brushless impact wrench designed for heavy-duty fastening and loosening applications. It features a robust brushless motor for extended tool life and efficiency, an integrated LED work light for improved visibility, and multiple speed/impact settings for versatile use.

Componentes incluídos:

• 1 x TOTAL 20V Cordless Brushless Impact Wrench (TIWLI2085)
• 2 x 4.0Ah Lithium-Ion Batteries (TFBLI2002)
• 1 x Charger (TFCLI2001E, 220-240V~50/60Hz)
• 3 x Deep Impact Sockets (22mm, 24mm, 27mm)
• 1 x Bolsa de transporte

Figure 2: The TOTAL TIWLI2085 impact wrench displayed alongside the three included deep impact sockets (22mm, 24mm, 27mm), illustrating the complete kit.

4. Configuração

4.1 Carregando a bateria

1. Connect the charger (TFCLI2001E) to a standard 220-240V~50/60Hz power outlet.
2. Slide the battery pack (TFBLI2002) onto the charger until it clicks into place.
3. The charging indicator light on the charger will illuminate, typically red for charging and green for fully charged.
4. Após a carga completa, desconecte o carregador da tomada e remova a bateria.

Observação: For optimal battery life, allow the battery to cool down before charging if it has been heavily used. Do not store batteries in a discharged state.

4.2 Instalação/Remoção de Soquetes

1. Ensure the impact wrench is turned off and the battery is removed for safety.
2. Align the square drive of the desired impact socket (e.g., 22mm, 24mm, or 27mm) with the 1/2 inch square drive anvil on the tool.
3. Push the socket firmly onto the anvil until it locks into place. Some sockets may require pulling back a retaining ring or pin.
4. To remove, reverse the process, pulling back the retaining mechanism if present, and pull the socket off.

5. Instruções de operação

5.1 Instalando a bateria

Slide a charged battery pack into the base of the impact wrench handle until it clicks securely into place.

5.2 Ligar/Desligar e Controle de Direção

• Ligado/Desligado: Squeeze the trigger switch to turn the tool on. Release the trigger to turn it off. The integrated LED work light will activate when the trigger is pressed.
• Controle de direção: Use the forward/reverse selector switch, typically located above the trigger, to choose the rotation direction (clockwise for fastening, counter-clockwise for loosening). Ensure the switch is fully engaged in the desired position before operating.

5.3 Speed and Impact Rate Adjustment

The TIWLI2085 features multiple speed and impact rate settings, allowing you to match the tool's performance to the task. Refer to the tool's controls for specific adjustment methods, which typically involve a button or switch to cycle through settings:

• Velocidade sem carga: 0-1600 / 0-2100 / 0-2400 RPM
• Taxa de impacto: 0-1500 / 0-1800 / 0-2200 BPM

Start with a lower setting for delicate tasks or when first engaging a fastener, and increase as needed.

5.4 Fastening and Loosening

1. Selecione o soquete apropriado para o fixador.
2. Set the direction switch to the desired mode (forward for fastening, reverse for loosening).
3. Coloque o soquete no fixador.
4. Squeeze the trigger to begin operation. Apply steady pressure to keep the socket engaged.
5. For fastening, tighten until the desired torque is achieved. For loosening, continue until the fastener breaks free.

Figure 3: The TOTAL TIWLI2085 impact wrench being used to fasten a lug nut on a car wheel, demonstrating its application for automotive tasks.

Figure 4: The TOTAL TIWLI2085 impact wrench in action, fastening a bolt on a metal workpiece, highlighting its versatility for various heavy-duty applications.

6. Manutenção

Regular maintenance ensures optimal performance and extends the life of your impact wrench.

• Limpeza: Mantenha as aberturas de ventilação da ferramenta limpas e livres de detritos. Use um pano macio e seco.amp cloth to wipe down the housing. Do not use harsh chemicals or abrasive cleaners.
• Cuidados com a bateria: Armazene as baterias em local fresco e seco, longe da luz solar direta e de temperaturas extremas. Não armazene baterias totalmente descarregadas por longos períodos.
• Inspeção: Periodically inspect the square drive anvil for wear or damage. Check the power cord of the charger for any cuts or fraying.
• Lubrificação: Esta ferramenta possui um motor sem escovas e componentes selados, não necessitando de lubrificação pelo usuário.

For any repairs or internal maintenance, contact qualified service personnel.

7. Solução De Problemas

Esta seção aborda problemas comuns que você pode encontrar com sua chave de impacto.

8. Especificações

Technical specifications for the TOTAL 20V Cordless Brushless Impact Wrench TIWLI2085:

9. Garantia e Suporte

TOTAL products are manufactured to high-quality standards. For warranty information, service, or technical support, please refer to the warranty card included with your product or contact your local TOTAL dealer or customer service center. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official TOTAL tools website ou entre em contato com o suporte ao cliente.