1. Produto acabadoview
The darkFlash DY470 is a full-tower ATX gaming PC case designed for high-performance builds. It features a unique angled glass panel, a dual-chamber layout for efficient component separation, and extensive compatibility for modern hardware. This manual provides detailed instructions for assembly, operation, and maintenance.
Figure 1.1: Fully assembled darkFlash DY470 PC case showcasing internal components and lighting.
Principais características:
- Unique Angled Glass: Provides an enhanced view de componentes internos.
- Design de câmara dupla: Separates components for improved airflow and aesthetics.
- Back Plug-in Motherboard Support: Simplifies cable management and enhances internal aesthetics.
- Amplo suporte para refrigeração: Accommodates up to two 360mm radiators and multiple fans.
- Interior espaçoso: Supports large GPUs up to 410mm and CPU coolers up to 175mm.
- Instalação sem ferramentas: Features a snap-on design for easy assembly and maintenance.
Figure 1.2: Visual representation of the darkFlash DY470's core features.
2. Guia de instalação
Follow these steps to install your components into the darkFlash DY470 PC case. Ensure your system is powered off and unplugged before beginning any installation.
2.1 Case Preparation
The DY470 case features a screwless disassembly design for easy access to internal compartments. Gently remove the side and top panels to prepare for component installation.
Figure 2.1: Easy disassembly of case panels for installation access.
2.2 Instalação da placa-mãe
The DY470 supports ATX back-mounted motherboards. Install your motherboard onto the designated standoffs in the main chamber. Ensure all necessary cables are routed through the back panel for a clean build.
Figure 2.2: Motherboard area with back plug-in support highlighted.
Instalação da GPU 2.3
The case accommodates large graphics cards. You can install your GPU horizontally or vertically. For vertical mounting, a riser cable (not included) is required.
- Maximum GPU Length (Horizontal): 410mm
- Maximum GPU Length (Vertical): 390mm
Figure 2.3: GPU compatibility and mounting options.
2.4 Instalação do ventilador e do radiador
The DY470 offers flexible cooling options. Install fans and radiators according to your cooling needs. The case supports:
- Principal: 3x120mm / 2x140mm fans; supports 120/240/280/360 liquid coolers.
- Lado: 3x120mm / 2x140mm fans; supports 120/240/280/360 liquid coolers.
- Traseira: 1x120mm fan; supports 120 liquid coolers.
- Fundo: 3x120mm / 2x140mm fans.
Figure 2.4: Fan and radiator bracket support.
2.5 Instalação da unidade de armazenamento
Install your storage drives in the designated bays:
- 2 x 3.5" HDD bays
- 1 x 2.5" SSD bay
Figure 2.5: Storage drive bay locations.
2.6 Instalação da fonte de alimentação
Install your power supply unit (PSU) in the bottom-mounted, dual-chamber compartment. Ensure the PSU fan faces outwards for optimal cooling.
2.7 Gerenciamento de cabos
Utilize the integrated velcro straps and the wire-covering back panel to organize cables for a clean build and improved airflow.
Figure 2.6: Cable management features and dust filter.
3. Operação
3.1 Painel de E/S frontal
O painel de E/S frontal oferece acesso conveniente às portas e controles essenciais:
- Botão de energia: Para ligar/desligar o sistema.
- Botão de reinicialização: Para reiniciar o sistema.
- Portas USB 3.0 (x2): For high-speed data transfer (up to 300MB/s).
- Porta Type-C: For high-speed data transfer (up to 1280MB/s).
- Conectores de áudio HD: Para fones de ouvido e microfone.
Figure 3.1: Front I/O Panel layout.
3.2 Controle de ventoinha ARGB
The included PWM ARGB fans can be controlled via compatible motherboard software for synchronized lighting effects. Please note that an ARGB Hub Controller is não incluso with the case and may be required for full functionality depending on your motherboard.
Figure 3.2: ARGB fan lighting synchronization.
3.3 Optimal Airflow
The dual-chamber design and extensive fan support contribute to optimal heat dissipation. Ensure fans are installed in appropriate intake and exhaust configurations for efficient cooling.
Figure 3.3: Airflow diagram for optimal heat dissipation.
4. Manutenção
4.1 Limpeza do filtro de poeira
The case includes a pull-out dust filter at the bottom to prevent dust accumulation. Regularly clean this filter to maintain optimal airflow and component longevity.
- Gently pull out the dust filter from the bottom of the case.
- Clean the filter using compressed air or a soft brush.
- Reinsert the clean filter into its slot.
Figure 4.1: Pull-out dust filter for easy cleaning.
4.2 Limpeza Geral
For general cleaning of the case exterior and interior:
- Use a soft, dry cloth to wipe down exterior surfaces.
- For glass panels, use a glass cleaner applied to a cloth (not directly to the glass) to avoid streaks.
- Utilize ar comprimido para remover a poeira dos componentes internos e das pás do ventilador.
- Evite usar produtos químicos agressivos ou materiais abrasivos que possam danificar o acabamento.
5. Solução De Problemas
This section addresses common issues you might encounter during assembly or operation.
5.1 Problemas de energia
- Sem energia: Ensure all power cables (PSU to wall, PSU to components, front panel connectors to motherboard) are securely connected. Check the power switch on the PSU.
- Potência intermitente: Verifique a potência da fonte de alimentação.tage is sufficient for all components. Check for loose connections.
5.2 Cooling Issues
- Altas temperaturas: Confirm fans are installed in the correct orientation (intake/exhaust). Ensure dust filters are clean. Verify CPU cooler and GPU cooler are properly seated.
- Ruído do ventilador: Check for obstructions in fan blades. Ensure fans are securely mounted.
5.3 Problemas de encaixe de componentes
- GPU Not Fitting: Refer to Section 2.3 for maximum GPU length specifications. Ensure the GPU is aligned correctly with the PCIe slot.
- Folga do refrigerador da CPU: Refer to Section 6 for maximum CPU cooler height.
6. Especificações técnicas
Detailed specifications for the darkFlash DY470 Full-Tower ATX Gaming PC Case.
| Recurso | Especificação |
|---|---|
| Nome do modelo | DY470 |
| Tipo de caso | Torre cheia |
| Compatibilidade da placa-mãe | ATX |
| Material | Metal, Vidro Temperado |
| Dimensões do produto (CxLxA) | 18.66 x 11.77 x 19.6 polegadas |
| Peso do item | 22 libras |
| Espaço máximo para GPU | Up to 410mm (Horizontal) / 390mm (Vertical) |
| Max CPU Air Cooler Height | Até 175 mm |
| Comprimento máximo da fonte de alimentação | 180 mm |
| Suporte do radiador (superior) | Até 360 mm |
| Suporte do radiador (lateral) | Até 360 mm |
| Baías de Unidade | 2 disco rígido de 3.5", 1 SSDs de 2.5" |
| Portas de E / S frontais | 2 x USB 3.0, 1 x Type-C, HD Audio, Power, Reset |
| Método de resfriamento | Ar, Água |
Figure 6.1: Case dimensions and fan layout.
Figure 6.2: Internal component clearance and radiator support.
7. Garantia e Suporte
O darkFlash fornece um garantia de 1 anos for computer cases, ensuring product quality and customer satisfaction. For any inquiries, technical assistance, or warranty claims, please contact darkFlash customer support through their official website ou seu ponto de venda.
Guarde seu comprovante de compra para validação da garantia.
