Diymore Humidity and Temperature Controller Socket User Manual

1. Introdução

This manual provides comprehensive instructions for the Diymore Humidity and Temperature Controller Socket. This device is designed to precisely control humidity and temperature in various environments, such as incubators, terrariums, greenhouses, and storage areas. It features multiple operating modes, calibration functions, and an alarm system to maintain desired environmental conditions.

2. Informações de segurança

Please read all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

• Ensure the power supply matches the device's specifications (230V, 16A, max 3680W).
• Do not immerse the device or sensor in water or expose it to excessive moisture.
• Não desmonte nem modifique o dispositivo.
• Mantenha fora do alcance de crianças.
• Desligue o aparelho da tomada antes de limpá-lo ou realizar qualquer manutenção.
• Use somente em ambientes internos e secos.

3. Recursos do Produto

The Diymore Controller Socket offers a range of features for precise environmental control:

• Quatro modos de operação: Humidification, Dehumidification, Heating, and Cooling.
• Ampla faixa de controle: Humidity 20-95%RH; Temperature -10°C to 50°C (14°F to 122°F).
• Adjustable Start/Stop Values: Program connected devices to activate based on set humidity/temperature thresholds.
• Função de calibração: Real-time adjustment for humidity (-10~10%RH) and temperature (-9.9~9.9°C).
• Função de alarme: Audible alarm when humidity or temperature exceeds set limits.
• Memória de dados: Retains all settings after a power failure.
• Função de reinicialização: Allows restoration of factory settings.
• Button Tone Settings: Customize button feedback.
• Error Prompt Function: Provides indications for operational issues.
• Alternância °C/°F: Alterne facilmente entre as unidades de temperatura Celsius e Fahrenheit.

Figura 3.1: Sobreview of Diymore Controller Socket features, including humidity and temperature control, alarm functions, calibration, and memory.

4. Conteúdo da embalagem

O pacote inclui os seguintes itens:

• 1 x Diymore Humidity and Temperature Controller Socket (230V)
• 1 x External Sensor Probe

5. Produto acabadoview e dimensões

Familiarize yourself with the device's components and dimensions.

Figura 5.1: Diymore Controller Socket with external sensor.

Figura 5.2: Product dimensions of the controller and sensor.

The main unit measures approximately 13.1 cm (5.11 in) in height, 6 cm (2.36 in) in width, and 3.2 cm (1.25 in) in depth. The sensor probe measures approximately 5.5 cm (2.16 in) in length and 2.3 cm (0.90 in) in width.

6. Configuração

1. Descompacte: Carefully remove the controller and sensor from the packaging.
2. Conectar sensor: Ensure the external sensor probe is securely plugged into the designated port on the side of the controller.
3. Sensor de posição: Place the sensor in the area where you wish to monitor and control humidity and temperature. Ensure it is not directly exposed to water or extreme conditions that could damage it.
4. Conecte: Insert the controller's plug into a standard 230V power outlet. The display will illuminate.
5. Conectar aparelho: Plug your humidifier, dehumidifier, heater, or cooler into the socket on the front of the controller.

7. Instruções de operação

The controller features four buttons: MODO, DEFINIR, UP/CLK, e ABAIXO.

7.1. Conversão de unidades de temperatura (°C/°F)

Para alternar entre Celsius (°C) e Fahrenheit (°F):

• Pressione e segure o DEFINIR button for 3 seconds. The temperature unit on the display will change.

7.2. Selecionando o modo de operação

The device supports four main operating modes: Humidification (HC mode), Dehumidification (HC mode), Heating (TC mode), and Cooling (TC mode). Press the MODO button repeatedly to cycle through these modes.

Figura 7.1: Examples of the four working modes and alarm settings.

7.3. Setting Humidity/Temperature Control Values

To set the desired start and stop values for humidity or temperature:

1. Pressione o MODO button to select either HC (Humidity Control) or TC (Temperature Control) mode.
2. Pressione o DEFINIR button once. The "Start Humidity" or "Start Temperature" value will begin to flash.
3. Use o UP/CLK e ABAIXO buttons to adjust the desired start value.
4. Pressione o DEFINIR button again. The "Stop Humidity" or "Stop Temperature" value will flash.
5. Use o UP/CLK e ABAIXO buttons to adjust the desired stop value.
6. Pressione o DEFINIR button a third time, or wait a few seconds, to save the settings and exit.

Observação: For humidification/heating, the start value should be lower than the stop value. For dehumidification/cooling, the start value should be higher than the stop value.

7.4. Setting Alarm Function

The device can trigger an alarm if humidity or temperature goes outside a set range.

1. Pressione o MODO button to select either HC Alarm (Humidity Alarm) or TC Alarm (Temperature Alarm) mode.
2. Pressione o DEFINIR button once. The alarm threshold value will flash.
3. Use o UP/CLK e ABAIXO buttons to adjust the desired alarm threshold.
4. Pressione o DEFINIR button again, or wait a few seconds, to save the setting and exit.

When the measured humidity/temperature exceeds the set alarm value, the hygrostat will emit an audible alarm sound.

7.5. Função de Calibração

To calibrate the humidity or temperature readings:

• Pressione e segure o UP/CLK button. The calibration value will appear and flash.
• Use o UP/CLK e ABAIXO buttons to adjust the calibration offset.
  • Humidity correction range: -10%RH to 10%RH
  • Temperature correction range: -9.9°C to 9.9°C
• Pressione e segure o MODO button to save the calibration and exit.

7.6. Outras funções

• Memória de dados: The device automatically saves all setting parameters, which are retained even after a power failure.
• Função de reinicialização: To restore factory settings, refer to the specific instructions in the full manual (if available) or contact support.
• Button Tone Settings: The device allows for customization of button sounds. Refer to the full manual for detailed instructions.
• Turn Off Alarm Sound: Specific instructions for turning off the alarm sound are typically found in the full manual.

8. Aplicações

The Diymore Controller Socket is versatile and suitable for various applications requiring precise humidity and temperature control:

• Incubadoras
• Domestic Reptile Habitats
• Poultry Houses
• Mushroom Cultivation
• Glass Containers / Terrariums
• Estufas
• Humidifiers and Dehumidifiers
• Household and Industrial Environments
• Adegas
• Geladeiras
• Armazéns

Figura 8.1: Diverse applications of the Diymore Controller Socket.

9. Manutenção

• Limpeza: Disconnect the device from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Cuidados com o sensor: Keep the sensor clean and free from dust or debris. Avoid bending or damaging the sensor cable.
• Armazenar: If storing the device for an extended period, unplug it and store it in a dry, cool place.

10. Solução De Problemas

If you encounter issues with your Diymore Controller Socket, refer to the following common problems and solutions:

11. Especificações

12. Garantia e Suporte

For warranty information or technical support, please refer to the documentation included with your purchase or contact Diymore customer service through their official website or the retailer where the product was purchased. Please have your model number (temperatuur vochtigheid) and purchase date available when contacting support.