1. Introdução
The ATOMSTACK P9 M50 is a portable and professional laser engraver designed for various materials including wood, leather, metal, and more. This manual provides essential information for safe operation, setup, and maintenance of your device, ensuring optimal performance and longevity.
2. Informações de segurança
AVISO: Laser radiation can cause eye damage and skin burns. Always follow safety guidelines to prevent injury.
- Proteção para os olhos: The laser module includes a protective cover. While this cover helps, it is highly recommended to wear additional laser safety goggles (not included) during operation to ensure maximum eye protection.
- Parada de emergência: Familiarize yourself with the emergency stop button. In case of any unexpected situation, press this button immediately to halt all machine operations. Rotate the button to disengage it before restarting.
- Ventilação: Operate the laser engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting. Consider using an exhaust system.
- Segurança do material: Do not engrave or cut unknown materials. Some materials can produce toxic fumes or catch fire. Always verify material compatibility and safety data.
- Supervisão: Never leave the machine unattended during operation. Stay within close proximity to monitor the process.
- Crianças e animais de estimação: Keep children and pets away from the operating area and the machine at all times.
Figure 2.1: Emergency Stop Button and Control Panel. The red button is the emergency stop, the silver button is On/Off, and the small button is Reset.
3. Conteúdo da embalagem
Verifique se todos os componentes estão presentes na embalagem:
- 1 x ATOMSTACK P9 M50 Laser Engraving Machine
- Parts for screw assembly (steps 2/3/4/5)
- 1 x Anti-dust cloth
- 1 x Tool set
- 1 x Fixed focus film
- 3 x Acrylic panels
- 3 x Wood chips
- 1 x leitor de cartão
- 5 x alfinetes de cabo
- 1 x Accessory package
- 1 x Display assembly
- 1 x Display cable
- 1 x adaptador de energia
- 1 x Cabo de alimentação
- 1 x Cabo de dados
- 1 x Metal cutting support plate
- 1 x Manual
- 1 x Laser assembly
- 1 x X-axis assembly
- 1 x Y-axis assembly
- 2 x Pés de apoio
- 4 x Mounting spacers
4. Guia de configuração
The ATOMSTACK P9 M50 comes 85% pre-assembled, simplifying the setup process. Follow these steps to prepare your engraver for use:
- Desembalagem: Carefully remove all components from the packaging and place them on a clean, stable surface.
- Montagem do quadro: Connect the X-axis and Y-axis assemblies as per the included manual's diagrams. Secure them using the provided screws and tools. Ensure all connections are firm.
- Instalação do módulo laser: Mount the laser assembly onto the X-axis carriage. Ensure it is securely fastened and the cables are properly connected.
- Pés de apoio: Attach the two support feet to the base of the machine for stability.
- Control Terminal: Connect the independent control terminal to the main unit using the display cable. The terminal features a magnetic adsorption design for easy attachment.
- Conexão de energia: Connect the power adapter to the machine and then plug it into a suitable power outlet (100-240V AC, 50/60Hz).
- Conexão de dados: For computer control, connect the machine to your computer using the provided USB data cable. Alternatively, you can use a TF card for offline operation.
Figure 4.1: Assembled ATOMSTACK P9 M50 Laser Engraver.
Figure 4.2: Independent Control Terminal connection.
5. Instruções de operação
5.1 Instalação e Conexão do Software
The ATOMSTACK P9 M50 is compatible with popular laser engraving software:
- LaserGRBL: Supports Win XP/Win 7/Win 8/XP/Win 10.
- LightBurn: Supports Win XP/Win 7/Win 8/XP/Win 10 and Mac systems.
Download and install your preferred software from the official websites. Connect the engraver to your computer via USB. Follow the software's instructions to establish a connection and begin your projects.
Figure 5.1: Software Compatibility and Connection.
5.2 Gravação offline
The P9 M50 supports offline engraving via its independent control terminal and TF card, allowing operation without a continuous computer connection.
- Prepare your engraving file (NC, BMP, JPG, PNG, DXF) using your chosen software.
- Salve o file to a TF card.
- Insert the TF card into the slot on the control terminal.
- Use the terminal's interface to select and start your engraving project.
Figure 5.2: Independent Control Terminal for Offline Engraving.
5.3 Fixed Focus Laser
The P9 M50 features a fixed-focus laser, eliminating the need for manual focus adjustment. This design ensures consistent precision and high energy density for both engraving and cutting tasks.
Figure 5.3: Fixed Focus Laser Technology.
5.4 Materiais Suportados
The ATOMSTACK P9 M50 can engrave and cut a wide range of materials:
- Madeira
- Bambu
- Cartão
- Plástico
- Couro
- PCB
- Óxido de alumínio
- Non-reflective electroplated and painted metal
- 304 mirror stainless steel
- Vidro
- Cerâmica
- Algodão
- Ardósia
- Cartão
- Tecido não tecido
- Wood board (up to 15mm)
- Acrylic (black, up to 15mm)
- Some thin plastic sheets
- Esponja
Figure 5.4: Dual Compression Spot Coupling Technology for Cutting.
6. Manutenção
Regular maintenance ensures optimal performance and extends the lifespan of your ATOMSTACK P9 M50. Perform these tasks periodically:
- Limpe a lente do laser: Periodically clean the laser lens with a soft, lint-free cloth and a specialized lens cleaning solution to maintain engraving precision and laser power.
- Limpe a área de trabalho: Remove debris, dust, and residue from the engraving area after each use to prevent interference with the laser path and machine movement.
- Lubrifique as peças móveis: Apply a small amount of appropriate lubricant to the guide rails and lead screws as needed to ensure smooth and precise operation of the machine's axes.
- Inspecione os cabos: Regularly check all power and data cables for signs of wear, fraying, or damage. Replace any damaged cables immediately to prevent electrical hazards.
7. Solução De Problemas
This section addresses common issues you might encounter with your ATOMSTACK P9 M50.
| Problema | Possível causa | Solução |
|---|---|---|
| A máquina não liga | Power cable loose; power adapter faulty; emergency stop engaged | Check all power connections; ensure the emergency stop button is disengaged (rotate to unlock). Test power adapter if possible. |
| Laser não dispara | Laser module not connected; software settings incorrect; material too reflective | Check laser module connection; verify software power settings (e.g., 100% power); ensure material is suitable for laser engraving/cutting. |
| Engraving is blurry or weak | Dirty laser lens; incorrect material settings; material not flat or properly positioned | Clean the laser lens; adjust power/speed settings in software for the specific material; ensure material is flat and secure on the work surface. |
| A máquina não está conectando ao computador. | USB cable faulty; driver issues; incorrect port selection in software | Try a different USB cable or port; reinstall necessary drivers for the engraver; select the correct COM port in your engraving software. |
8. Especificações
Detailed technical specifications for the ATOMSTACK P9 M50 Laser Engraver:
| Potência da máquina | 50 W |
| Potência óptica do laser | 10-11 W |
| Comprimento de onda do laser | 455 ± 5 m² |
| Precisão de gravação | 0.01 milímetros |
| Método de Focalização | Foco fixo |
| Área de Gravação | 220 x 250 mm |
| Transferência de dados | USB connection / TF card |
| Software operacional | LaserGRBL, LightBurn |
| SO suportado | Win XP/7/8/10, Mac (LightBurn) |
| Suportado File Formatos | NC, BMP, JPG, PNG, DXF |
| Entrada de energia | 100-240 VAC, 50 / 60 Hz |
| Potência de saída | 12 V 5 A |
| Peso líquido | 3.5 kg |
| Certificações | CE, FCC, RoHS, FDA, PSE |
Figura 8.1: Dimensões e especificações principais do produto.
9. Garantia e Suporte
Para informações sobre garantia e suporte técnico, consulte o site oficial da ATOMSTACK. webNo site ou entre em contato com o revendedor. Guarde o comprovante de compra como prova de aquisição.
Recursos on-line:
- Visit the official ATOMSTACK store on Amazon: Loja Oficial da ATOMSTACK
- For software support, visit the official websites de LaserGRBL e Queimadura de luz.
