Introdução
This manual provides detailed instructions for the setup, operation, and maintenance of your FiiO TT13 Fully Automatic Vinyl Stereo Turntable. Designed for ease of use, the TT13 features a fully automatic tonearm, a powerful built-in phono preamp, and a robust aluminum construction to deliver a high-fidelity analog audio experience. Please read this manual thoroughly before using your turntable to ensure proper function and longevity of the device.
O que está na caixa
Desembale cuidadosamente todos os componentes e certifique-se de ter recebido os seguintes itens:
- Cast aluminum turntable (1)
- Platter mat (1)
- Cabo de alimentação (1)
- RCA audio cable (including ground wire) (1)
- Custom infrared remote control (1)
- Guia de início rápido (1)
- Cartão de garantia (1)
- 7-inch large hole 45 RPM record adapter (1)
Figure 1: Contents of the FiiO TT13 Turntable package.
Configurar
1. Turntable Assembly
Place the turntable on a stable, level surface. Carefully mount the die-cast aluminum platter onto the spindle. Locate the drive belt and gently place it around the motor pulley, ensuring it is not twisted. Place the platter mat on top of the platter.
Figure 2: Assembling the platter and drive belt on the FiiO TT13 turntable.
2. Instalação da tampa protetora contra poeira
Insert the hinge pockets of the dust cover into the hinges located at the rear of the turntable chassis. The dust cover protects the turntable from dust and debris when not in use.
3. Conexão de energia
Connect the power cord to the DC 12V input on the rear of the turntable, then plug the adapter into a wall outlet. The TT13 supports a wide AC 100-240V voltage gama.
4. Conexão de áudio
Connect the supplied RCA audio cable to the ANALOG OUT ports on the turntable. Connect the other end of the RCA cable to your powered speakers or amplifier. Ensure the PHONO/LINE switch on the turntable's rear panel is set to the appropriate position (LINE for built-in preamp, PHONO if using an external phono preamp).
Figure 3: Rear panel connections for power and audio output.
5. Tonearm Preparation
Carefully remove any protective packaging or twist-ties securing the tonearm. Ensure the stylus guard is removed before playback. The TT13 features a pre-calibrated tonearm for immediate use.
Video 1: This video demonstrates the installation process for a belt-drive turntable, including platter and belt setup. While not specific to the FiiO TT13, the general principles of belt installation are applicable.
Instruções de operação
1. Ligar/desligar
Press the POWER button on the front panel to turn the turntable on or off. The unit will illuminate when powered on.
2. Selecionando a velocidade de reprodução
Use the SPEED button to toggle between 33 1/3 RPM and 45 RPM, matching the speed to your vinyl record. For 7-inch 45 RPM records, use the included adapter.
3. Automatic Playback
Place a record on the platter. Press the START/STOP button. The tonearm will automatically lift, move to the beginning of the record, and begin playback. To stop playback, press the START/STOP button again. The tonearm will automatically lift, return to its rest, and the platter will stop spinning.
Figure 4: The fully automatic tonearm simplifies playback and includes a loop playback function.
4. Loop Playback
The TT13 supports automatic loop playback. After a record finishes, the tonearm will return to the start and replay the record. Press the REPEAT button to activate or deactivate this feature.
5. Operação de controle remoto
Use the custom infrared remote control to manage various functions from a distance, including power on/off, start/stop playback, repeat play, and adjusting lighting brightness. The remote also allows fine-tuning of the tonearm direction for precise cueing.
Figure 5: The included remote control provides convenient access to turntable functions.
6. Customizable Lighting Effects
The TT13 features customizable RGB and LED lighting effects. Adjust the lighting brightness or turn off the lights using the controls on the machine or the remote control.
Figure 6: The turntable offers 7 dazzling lighting effects with adjustable brightness.
Características
Fully Automatic Tonearm Design
The FiiO TT13 is equipped with a fully automatic tonearm, simplifying the vinyl playback experience. With a single touch, the tonearm automatically positions itself at the start of the record and returns to its rest position upon completion, minimizing wear on both the stylus and records.
Powerful Built-in Phono Preamp
The turntable integrates a professional-grade phono preamp, delivering a line output level of 800mV@1kHz 0dB. This powerful output, combined with superior signal-to-noise ratio and channel separation, allows direct connection to powered speakers or any line-level input, eliminating the need for an external phono preamp.
Figure 7: The powerful built-in phono preamp ensures high-quality audio output.
Pure Analog Audio Architecture
The audio section of the TT13 utilizes a fully analog architecture, featuring two imported high-fidelity JRC5532 operational amplifiers in a two-stage amplification circuit. This design, complemented by multiple electrolytic capacitors and independent LDO power supplies, ensures low noise levels and a rich, warm analog sound.
Figure 8: Diagram illustrating the specially designed analog audio architecture for pure sound.
Robust All-Aluminum Alloy Panel
The turntable features a meticulously polished metal panel, weighing nearly 4kg, which provides excellent anti-interference performance and effective shielding against external disturbances. Sturdy feet further enhance shock absorption, minimizing environmental vibrations for stable, high-quality audio playback.
Figure 9: The robust all-aluminum alloy panel provides stability and interference shielding.
DC/AC Dual Power Supply Design
The TT13 incorporates a built-in switching power supply (AC 100-240V) for global compatibility. It also offers the option for an external DC 12V-1A power supply, suitable for high-fidelity usage scenarios.
Figure 10: The turntable's dual power supply design offers flexibility and high-fidelity performance.
Manutenção
Limpando o prato giratório
- Regularly wipe the dust cover and chassis with a soft, dry cloth.
- Para manchas persistentes, use um produto ligeiramente damp pano com sabão neutro e seque bem.
- Evite usar produtos químicos agressivos ou produtos de limpeza abrasivos, pois podem danificar o acabamento.
Cuidados com a caneta
- Gently clean the stylus regularly using a soft brush designed for stylus cleaning, brushing from back to front.
- Avoid touching the stylus with your fingers to prevent damage or contamination.
- Replace the stylus when signs of wear appear (e.g., distorted sound, skipping), typically after 300-500 hours of playback.
Cuidados com registros
- Always handle records by their edges to avoid transferring oils and dirt.
- Guarde os discos na vertical, dentro das capas, em local fresco e seco.
- Clean records with a dedicated record brush before each play to remove dust and static.
Solução de problemas
Sem energia
- Ensure the power cord is securely connected to the turntable and the wall outlet.
- Verify the wall outlet is functioning correctly by plugging in another device.
Sem som ou baixo volume
- Verifique todas as conexões dos cabos de áudio entre o toca-discos e o seu aparelho. ampamplificador/alto-falantes.
- Ensure the PHONO/LINE switch on the turntable's rear is set correctly for your setup.
- Verifique seu amplifier/speakers are powered on and set to the correct input.
- Confirm the stylus is properly seated and not damaged.
Som com falhas ou distorcido
- Ensure the turntable is placed on a stable, level surface to prevent vibrations.
- Clean the record and stylus thoroughly.
- Check for any visible damage to the record or stylus.
Incorrect Playback Speed
- Verify the SPEED button is set to the correct RPM (33 1/3 or 45) for your record.
- Ensure the drive belt is correctly installed and not slipping.
Especificações
| Recurso | Especificação |
|---|---|
| Marca | FiiO |
| Nome do modelo | TT13 |
| Número do modelo do item | TT13 Silver Standard |
| Tipo de motor | Cinto de segurança |
| Velocidade Rotacional Máxima | 45 RPM |
| Material | Alumínio |
| Cor | Prata |
| Peso do item | 12.76 libras |
| Dimensões da embalagem | 18.11 x 17.72 x 6.3 polegadas |
| Dispositivos compatíveis | Palestrante |
| Recurso especial | Velocidade ajustável |
Garantia e Suporte
The FiiO TT13 Turntable comes with a manufacturer's warranty. Please refer to the included Warranty Card for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact FiiO customer service through their official website ou o varejista onde o produto foi comprado.
Guarde o comprovante de compra para validação da garantia.
