1. Introdução
This manual provides detailed instructions for the installation, operation, and maintenance of your NB ERGONOMIC Gaming Monitor Arm A6. Designed for heavy-duty use, this monitor arm supports flat, ultrawide, and curved monitors ranging from 27 to 50 inches, with a load capacity of 2-18 kg (4-40 lbs). It features universal VESA 75x75mm/100x100mm compatibility and advanced mechanical spring technology for stable and precise monitor positioning.
Please read this manual thoroughly before installation and use to ensure proper setup and to maximize the ergonomic benefits of your monitor arm.
2. Informações de segurança
AVISO: O não cumprimento destas instruções pode resultar em danos materiais ou ferimentos pessoais.
- Ensure your desk surface is stable and strong enough to support the combined weight of the monitor arm and your monitor.
- Não exceda a capacidade máxima de peso de 18 kg (40 lbs).
- Verify that your monitor has VESA 75x75mm or 100x100mm mounting holes.
- Mantenha as peças pequenas longe das crianças.
- Use only the provided hardware. Using incorrect screws may damage your monitor.
- Adjust tension screws only after the monitor is securely mounted to prevent sudden movement.
- Do not attempt to modify the monitor arm.
Nota importante: Certain desktop types are not suitable for monitor mount installation:
Unsuitable Desktops: Fragile desktops (e.g., marble, glass), desks with too narrow clamping surfaces due to baffles, or desks with irregular/beveled edges are not recommended for clamp montagem.
3. Conteúdo da embalagem
Before proceeding with installation, please verify that all components are present and undamaged. Refer to the image below for a visual guide to the included parts.
Descrição da imagem: This image displays all parts of the monitor arm kit, including the main arm, VESA plate, desk clamp components, grommet mount parts, various screws (M4x10, M4x12, M6x10, M6x12), washers, Allen wrenches, and cable management accessories.
4. Configuração
4.1 Verificações de pré-instalação
- Compatibilidade com a mesa: Ensure your desk is suitable for mounting. Avoid fragile materials like glass or marble. For C-clamp mounting, the desk thickness should be 20-90mm (0.8"-3.5") and the bottom depth above 50mm (1.97"). For grommet mounting, the desk thickness should be 20-90mm (0.8"-3.5") and the hole diameter 10-60mm (0.4"-2.3").
- Compatibilidade VESA: Locate the VESA mounting holes on the back of your monitor. The arm supports 75x75mm and 100x100mm patterns. If your monitor has an embedded hole, ensure the panel can be placed directly. If the embedded position is small, use the heightening pads and lengthened screws provided.
Descrição da imagem: This image shows how to identify VESA mounting holes on a monitor, including removing a back panel if necessary. It also illustrates the use of heightening pads and different screw sizes for monitors with embedded VESA mounts.
Descrição da imagem: This diagram specifies the required desk dimensions for both Grommet and C-Clamp mounting methods, including desk thickness and hole diameter for grommet, and desk thickness and bottom depth for C-clamp.
4.2 Montagem do braço na mesa
The monitor arm supports two mounting methods: C-Clamp and Grommet.
- C-Clamp Instalação:
- Anexe o C-clamp base até a borda da sua mesa.
- Aperte o clamp screws securely until the base is firm and stable.
- Insira a haste principal do braço do monitor no encaixe C-clamp base.
- Instalação do ilhó:
- Se sua mesa tiver um orifício para passagem de cabos, insira a base do ilhó através do orifício.
- Fixe a base por baixo da mesa usando a placa e a porca fornecidas.
- Insert the main pole of the monitor arm into the grommet base.
Descrição da imagem: Um detalhado view do C-clamp base, showing how it attaches to the desk edge with two tightening screws for stability.
4.3 Conectando o Monitor
- Attach the VESA plate to the back of your monitor using the appropriate screws (M4x10, M4x12, M6x10, M6x12) and washers. Ensure the screws are not too long to avoid damaging the monitor's internal components.
- Carefully lift the monitor with the attached VESA plate and slide it onto the monitor arm's mounting head. Ensure it clicks securely into place.
- Confirm the quick-release mechanism is engaged.
Descrição da imagem: This image demonstrates the quick installation of the monitor onto the arm. The VESA plate, already attached to the monitor, slides down onto the arm's head, with an inset showing the red quick-release lever in the locked position.
Descrição da imagem: This image reiterates the quick installation and easy disassembly process, showing the VESA plate being attached to the arm's head and the red lever for securing or releasing o monitor.
4.4 Gerenciamento de cabos
Route your monitor cables through the integrated cable management channels on the arm to maintain a tidy workspace.
Descrição da imagem: Um close-up view of the monitor arm's cable management system, illustrating how a blue cable is neatly tucked into the arm's channel.
5. Operação
5.1 Ajustando a posição do monitor
The NB ERGONOMIC Gaming Monitor Arm A6 offers extensive adjustability for optimal viewconforto:
- Height Adjustment (Lift): The arm provides 260mm (10.2 inches) of vertical lift. Gently push or pull the monitor to the desired height.
- Inclinar: Adjust the monitor tilt by ±50° to reduce glare and find your preferred viewângulo de engate.
- Giratório: Swivel the monitor 360° at the VESA plate for easy screen sharing or portrait mode.
- Rotação: The arm allows 360° rotation at two points for flexible positioning.
- Extensão: The arm can extend up to 620mm (24.4 inches) from the mounting point.
Descrição da imagem: This image illustrates the maximum extension (24.4 inches / 620mm) and vertical lift (10.2 inches / 260mm) capabilities of the monitor arm, demonstrating its range of motion.
Descrição da imagem: This image visually explains the arm's articulation, including 360° swivel, 360° rotation at two joints, and ±50° tilt, showcasing sua flexibilidade.
5.2 Ajuste de tensão
The arm's gas spring tension needs to be adjusted to match the weight of your monitor for optimal performance and stability. This adjustment should only be done depois the monitor is mounted.
- Locate the tension adjustment screw on the arm (usually covered by a cap).
- Use the provided Allen wrench to turn the screw.
- Se o monitor levanta on its own: Turn the screw towards the "-" direction to reduce tension for a lighter monitor.
- Se o monitor cai on its own: Turn the screw towards the "+" direction to increase tension for a heavier monitor.
- Adjust gradually until the monitor stays at the desired height without drifting up or down.
Descrição da imagem: This image illustrates the tension adjustment process. It shows the monitor arm with a monitor and an inset detailing the tension screw. Instructions guide the user to adjust tension based on whether the monitor raises or falls, emphasizing that adjustment should occur after mounting.
6. Manutenção
- Verifique regularmente todos os parafusos e conexões para garantir que permaneçam apertados e seguros.
- Limpe o braço do monitor com um pano macio e seco.amp pano. Evite produtos de limpeza abrasivos ou solventes.
- If movement becomes stiff or jerky, a thin layer of silicone grease can be applied to the joints, if accessible, to improve glide.
7. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Monitor sags or falls down. | Insufficient gas spring tension for monitor weight. | Increase tension by turning the adjustment screw towards "+" (clockwise). Ensure monitor is mounted before adjusting. |
| Monitor floats up or is difficult to push down. | Excessive gas spring tension for monitor weight. | Decrease tension by turning the adjustment screw towards "-" (counter-clockwise). Ensure monitor is mounted before adjusting. |
| Arm feels loose or unstable. | Mounting screws or clamp não está totalmente apertado. | Check and tighten all mounting screws (desk clamp/grommet and VESA plate screws). |
| Monitor does not fit VESA plate. | Incorrect VESA pattern or screw size. | Verify monitor VESA pattern (75x75mm or 100x100mm). Use correct screw length and heightening pads if necessary. |
8. Especificações
| Recurso | Detalhe |
|---|---|
| Modelo | A6 |
| Compatibilidade do tamanho da tela | 27 to 50 inches (Flat, Ultrawide, Curved) |
| Capacidade de peso | 2-18 kg (4-40 lbs) |
| Compatibilidade VESA | 75x75mm, 100x100mm |
| Método de montagem | C-Clamp, Ilhós |
| Material | Aluminum alloy, Cold-rolled steel, ABS |
| Height Adjustment (Lift) | 260 mm (10.2 polegadas) |
| Ângulo de inclinação | ±50° |
| Ângulo de giro | 360° |
| Ângulo de rotação | 360° |
| Extensão máxima | 620 mm (24.4 polegadas) |
| Espessura da mesa (C-Cl)amp) | 20-90 mm (0.8"-3.5") |
| Espessura da mesa (ilhós) | 20-90 mm (0.8"-3.5") |
| Diâmetro do furo do ilhó | 10-60 mm (0.4"-2.3") |
Descrição da imagem: This diagram provides a summary of the product's key specifications, including dimensions, weight capacity, VESA standards, and articulation ranges.
9. Garantia
The NB ERGONOMIC Gaming Monitor Arm A6 is backed by a Garantia de 2 ano. This warranty covers manufacturing defects and ensures the product meets its stated performance standards. Please retain your proof of purchase for warranty claims.
10. Suporte ao cliente
For technical assistance, warranty claims, or any questions regarding your NB ERGONOMIC Gaming Monitor Arm A6, please contact our customer support team. Refer to the product packaging or the official NB ERGONOMIC website para detalhes de contato.
