Manual do Usuário da Bateria POWTREE DCB609 Flexvolt

1. Introdução

This manual provides essential information for the safe and effective use of your POWTREE DCB609 9.0Ah Flexvolt Battery. This battery is designed as a replacement for Dewalt 20V/60V Flexvolt batteries, offering versatile power for a wide range of cordless tools. Please read this manual thoroughly before using the product.

Image: Two POWTREE DCB609 Flexvolt batteries, showcasing their design and 20V/60V labeling.

2. Informações de segurança

Always observe the following safety precautions to prevent injury or damage to the battery and tools:

• Não mergulhe a bateria em água ou outros líquidos.
• Do not store or use the battery in extreme temperatures (above 60°C or below -20°C).
• Não provoque curto-circuito nos terminais da bateria.
• Do not disassemble, crush, or incinerate the battery.
• Mantenha a bateria longe das crianças.
• Use only compatible chargers for charging.
• If the battery shows signs of damage, swelling, or leakage, discontinue use immediately.

Image: A POWTREE battery highlighting its built-in safety features, including over-voltage, over-current, over-heat, short-circuit, over-discharge, and over-charge protection.

3. Configuração

3.1 Carregamento Inicial

Before first use, fully charge the battery using a compatible Dewalt 20V/60V battery charger. Compatible chargers include DCB107, DCB115, DCB118, DCB104, DCB102, and DCB112.

1. Insert the battery into the charger, ensuring it clicks into place.
2. Conecte o carregador a uma tomada elétrica.
3. Monitor the charger's indicator lights for charging status. The battery is fully charged when the indicator shows a solid green light (or as per your charger's manual).
4. Depois de totalmente carregado, desconecte o carregador da tomada e remova a bateria.

3.2 Instalação da bateria

To install the battery into a compatible tool:

1. Alinhe a bateria com o compartimento da bateria na ferramenta.
2. Slide the battery into the tool until it locks securely into place. A click sound indicates proper installation.
3. To remove, press the battery release button(s) on the tool and slide the battery out.

Image: Detailed close-up views of the POWTREE battery, showing the charge indicator lights, the battery release mechanism, and the ventilation slots for optimal performance.

4. Operação da bateria

The POWTREE DCB609 battery is a Flexvolt battery, meaning it automatically changes voltage between 20V and 60V depending on the tool it is connected to. This provides extended runtime for 20V tools and increased power for 60V tools.

• Modo 20V: When used with 20V MAX tools, the battery operates in parallel mode, providing 9.0Ah capacity for extended runtime.
• Modo 60V: When used with 60V MAX tools, the battery operates in series mode, providing 3.0Ah capacity for increased power.

4.1 Indicador de Carga

Press the button on the battery to check the charge level. The indicator lights will illuminate to show the remaining charge:

• Four lights: Full charge
• Three lights: High charge
• Two lights: Medium charge
• One light: Low charge, recharge soon

Image: A diagram explaining the proprietary battery technology, showing how the Flexvolt battery automatically switches between 20V (parallel mode for runtime) and 60V (series mode for power) depending on the tool.

5. Manutenção e armazenamento

A manutenção e o armazenamento adequados prolongarão a vida útil da sua bateria:

• Keep the battery clean and dry. Wipe with a soft, damp pano se necessário.
• Guarde as baterias em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
• For long-term storage, charge the battery to approximately 50-70% capacity. Avoid storing fully charged or completely discharged batteries for extended periods.
• Do not store the battery near metallic objects that could short-circuit the terminals.

6. Solução De Problemas

7. Especificações

8. Compatibilidade

8.1 Compatible Chargers

This battery is compatible with all Dewalt 20V/ MAX battery chargers, including but not limited to:

• DCB107
• DCB115
• DCB118
• DCB104
• DCB102
• DCB112

8.2 Compatible Dewalt 20V MAX Tools

This battery is a direct replacement for various Dewalt 20V batteries and is compatible with a wide range of 20V MAX tools, including:

• DCD Series: DCD740, DCD740B, DCD780, DCD780B, DCD780C2, DCD780L2, DCD785C2, DCD785L2, DCD980L2, DCD980M2, DCD985B, DCD985L2, DCD985XR, DCD740C1
• DCF Series: DCF883B, DCF883L2, DCF885, DCF885B, DCF885C2, DCF885L2, DCF895B, DCF895C2, DCF895L2, DCF880C1-JP
• DCS Series: DCS331B, DCS331L1, DCS331L2, DCS331N, DCS380B, DCS380L1, DCS381, DCS391B, DCS391L1, DCS393, DCH214L2
• DCG Series: DCG412, DCG412B, DCG412L2

8.3 Compatible Dewalt 60V MAX Tools

This battery is also compatible with Dewalt 60V MAX tools, including:

• DCS578X2, DCBL772X1, DCK299D1T1, DCS578B, DCS690X2, DCC2560T1, DCG414B, DCD460T2, DCG418X1, DCS389B, DCS388T2, DCH481B, DCS7485B, DCD130B, DCS520T1, DCS388T1, DCS520B, DCBL772B, DCG414T2, DCS574W1, DCS388B, DCS389X1, DCD470B, DCG418X2, DCS575B, DCS7485T1, DCS373B, DCBL770X1

Image: A POWTREE Flexvolt battery positioned centrally, surrounded by images of various compatible Dewalt 20V/60V cordless power tools, illustrating its broad application.

Image: A collage showing the POWTREE Flexvolt battery in action, powering various Dewalt tools such as drills, saws, and grinders in different work scenarios.

9. Garantia e Suporte

POWTREE provides the following support for your DCB609 battery:

• Garantia: 12-Month Warranty from the date of purchase.
• Garantia de devolução de dinheiro: 30 Days Money Back Guarantee.
• Suporte online: 24-hour online support is available.

For any questions or support, please click the "Ask a question" option on our storefront or the "contact seller" option in your order details.