1. Produto acabadoview
The CYCPLUS Tiny Pump AS2 is a portable, ultra-mini electric bicycle pump designed for convenient and rapid tire inflation. Its compact size and lightweight aluminum construction make it an ideal companion for cyclists. This pump features a Type-C rechargeable battery and is capable of reaching a maximum air pressure of 100 PSI.
The CYCPLUS Tiny Pump AS2, showcasingraças ao seu design compacto.
2. Principais características
- Tamanho de bolso e portátil: Weighing only 3.42 oz (97g) and measuring 1.71 x 1.1 x 2.52 inches, this pump is designed for easy portability, fitting into a pocket or attaching to a backpack.
- Inflação Poderosa: Achieves a maximum air pressure of 100 PSI with a wind speed of 5L/min, capable of inflating a 700*25C tire to 80 PSI in approximately 80 seconds.
- Bateria recarregável: Fully charges in about 20 minutes and can inflate two 700*25C tires from 0 to 80 PSI on a single charge. Features a low standby current for extended battery life.
- Dual Nozzle Compatibility: Compatible with both Schrader and Presta valves, offering versatility for various bicycle types.
- Durável e seguro: Constructed from aluminum, designed for durability and capable of inflating over 200 tires throughout its lifespan.
Design compacto e leve para fácil transporte.
Demonstration of the pump's fast inflation capability.
3. Lista de embalagem
The CYCPLUS Tiny Pump AS2 package includes the following items:
- Inflator (CYCPLUS Tiny Pump AS2)
- Cabo de carregamento tipo C
- Manual de instruções
- Caixa de embalagem
- Capa de silicone
- Pillar (for Schrader valve assembly)
- Seal Part (for valve assembly)
- Mangueira de extensão
- Splash-proof Pouch
All items included in the CYCPLUS Tiny Pump AS2 package.
4. Setup and Valve Compatibility
The CYCPLUS Tiny Pump AS2 is compatible with both Presta and Schrader valves. The inflator is ready for Presta valves right out of the box. For Schrader valves, a simple reassembly of the internal components is required.
4.1. Identifying Valve Types
- Válvula Presta: Thinner, with a small nut at the top that needs to be loosened before inflation.
- Válvula Schrader: Wider, similar to car tire valves, with a pin in the center.
Visual guide for Presta and Schrader valve types and pump assembly.
4.2. Assembling for Schrader Valve
To use the pump with a Schrader valve, you need to install the included pillar and seal part. Follow these steps:
- Remove the nozzle cap from the inflator.
- Insert the pillar into the nozzle opening.
- Place the seal part with the big hole facing inwards onto the pillar.
- Reattach the nozzle cap, ensuring it is securely fastened.
For a visual demonstration of valve assembly and usage, please refer to the official usage guidance video below:
Official usage guidance video for the CYCPLUS Tiny Pump AS2, demonstrating valve assembly and inflation.
5. Instruções de operação
The CYCPLUS Tiny Pump AS2 features a simple one-button operation for inflation.
5.1. Processo de inflação
- Ensure the pump is adequately charged (refer to battery indicator below).
- For Presta valves, loosen the nut at the top of the valve stem. For Schrader valves, ensure the pump is correctly assembled.
- Firmly connect the pump's nozzle to the tire valve.
- Double-click the power button to start the inflation. The pump will begin to inflate the tire.
- Monitor the tire pressure manually by feel, as this model does not have a pressure display.
- Once the desired pressure is reached, single-click the power button to stop the inflation.
- Carefully disconnect the pump from the tire valve. For Presta valves, tighten the nut.
Observação: Always start the pump before connecting it to the nozzle if the tire is completely flat (non-flat tire start before connecting to the nozzle).
5.2. Indicador de bateria
The pump features a simple LED battery indicator:
- Luz verde: Carga de 80% -100%
- Luz Laranja: Carga de 50% -80%
- Luz vermelha: Carga de 0 a 50% (recarregue em breve)
Battery indicator guide for the CYCPLUS Tiny Pump.
6. Dados de desempenho
The following table provides approximate inflation times and available uses per full charge for various tire types. These are experimental data from CYCPLUS labs and are for reference only.
| Tipo de pneu | Pressão | Tempo de Inflação | Available Times |
|---|---|---|---|
| 700*25°C | 0-60PSI / 4.14bar | 50~60 segundos | 4 |
| 700*25°C | 0-80PSI / 5.52bar | 80~90 segundos | 2 |
| 700*25°C | 0-100PSI / 6.90bar | 150~160 segundos | 1 |
| 26X1.95 | 0-35PSI / 2.41bar | 70~80 segundos | 2 |
| 26X1.95 | 0-50PSI / 3.45bar | 120~130 segundos | 1 |
| 700C28 | 0-70PSI / 4.83bar | 70~80 segundos | 3 |
| 700C28 | 0-80PSI / 5.52bar | 150 segundos | 1 |
| 700C32 | 0-60PSI / 4.14bar | 100~110 segundos | 2 |
| 700C32 | 0-80PSI / 5.52bar | 230~240 segundos | 1 |
Detailed performance data for the pump.
7. Manutenção
- Carregamento: Charge the pump fully after each use or when the red battery indicator light is on. Use the provided Type-C cable. A full charge takes approximately 20 minutes.
- Armazenar: Armazene a bomba em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
- Limpeza: Limpe a bomba com um pano macio e seco. Não utilize produtos químicos agressivos ou abrasivos.
- Componentes da válvula: Periodically check the pillar and seal part for wear and tear, especially if you frequently switch between valve types. Replace if damaged.
8. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A bomba não inicia | Bateria fraca | Carregue a bomba completamente. |
| A bomba não inicia | Not double-clicked | Ensure you double-click the power button to activate. |
| Inflação lenta ou nenhuma inflação | Improper connection to valve | Ensure the nozzle is firmly and correctly attached to the tire valve. For Presta, loosen the nut. |
| Inflação lenta ou nenhuma inflação | Incorrect valve assembly (for Schrader) | Verify the pillar and seal part are correctly installed for Schrader valves. |
| Pump gets warm during use | Operação normal | This is normal during extended inflation. Allow the pump to cool down if it becomes excessively hot. |
9. Especificações
| Especificação | Detalhe |
|---|---|
| Nome do modelo | Ivp032 (Part Number: AS2) |
| Cor | Preto |
| Material | Alumínio |
| Peso do item | 97 gramas |
| Dimensões do produto (C x L x A) | 1.71" x 1.1" x 2.56" |
| Fonte de energia | Alimentado por bateria |
| Capacidade de fluxo de ar | 5 LPM |
| Pressão Máxima | 100 PSI |
| Modo de operação | Automático |
| Bateria | 7.4V 300mAh (approx. 20 min full charge) |
| Porta de carregamento | Tipo C |
Comparison of CYCPLUS Tiny E-pump AS2 series models.
10. Garantia e Suporte
All CYCPLUS products come with a two-year warranty. If you encounter any issues while using the product within this period, please contact customer service for repair or replacement.
For further assistance, please visit the official CYCPLUS store or contact their customer service directly.
- Período de garantia: Dois anos a partir da data da compra.
- Contato: Refer to your product packaging or the official CYCPLUS webAcesse o site para obter as informações de contato mais atualizadas.
