BESTTEN USP-DS07N-6PK

Manual do Usuário do Interruptor Dimmer Super Slim BESTTEN USP-DS07N-6PK

Model: USP-DS07N-6PK

Introdução

Thank you for choosing the BESTTEN Super Slim Dimmer Switch. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new dimmer switch. Please read all instructions carefully before installation and retain this manual for future reference.

Six BESTTEN Super Slim Dimmer Switches in white, packaged together.

Image: Six BESTTEN Super Slim Dimmer Switches.

Informações de segurança

  • AVISO: Para evitar incêndio, choque elétrico ou morte, desligue a energia no disjuntor ou na caixa de fusíveis e verifique se a energia está realmente desligada antes de fazer qualquer fiação.
  • Instale de acordo com todos os códigos elétricos nacionais e locais.
  • Use apenas fio de cobre.
  • Este dispositivo é somente para uso interno.
  • Do not use with non-dimmable bulbs.
  • Maximum load: 300W for dimmable LED/CFL, 600W for incandescent/halogen.
  • Only one dimmer switch can be installed per 3-way circuit.

Conteúdo da embalagem

  • BESTTEN Super Slim Dimmer Switch (Quantity as purchased, e.g., 6 switches)
  • Parafusos de montagem

Note: Wall plates are not included and must be purchased separately.

Especificações

ParâmetroValor
Volumetage120 V, 60 Hz
Dimmable LED/CFL Max. Load300 W
Incandescent/Halogen Max. Load600 W
Tipo de interruptorSingle Pole / 3-Way
Tipo de fiaçãoWire Pigtails
Temperatura de operação32°F – 104°F (0°C – 40°C)
CertificaçõesListado em ETL/cETL
Dimensões (C x L x A)4.13 x 1.73 x 0.87 polegadas
Table of specifications for the dimmer switch, including voltage, o quetage, and certifications.

Image: Detailed specifications for the dimmer switch.

Diagram showing the super slim design of the dimmer switch with dimensions in inches and centimeters, compared to a quarter coin.

Image: Super Slim Design dimensions.

Image showing the dimmer switch and icons for Dimmable LED, Dimmable CFL, and Incandescent bulbs with their respective wattage avaliações.

Image: Bulb compatibility and wattage avaliações.

Configuração e instalação

Before beginning installation, ensure the power is turned off at the circuit breaker. This dimmer switch is designed for both single-pole and 3-way applications and does not require a neutral wire, making it suitable for older electrical systems.

Text overlay 'No Neutral Wire Required' over an image of a house, indicating suitability for older wiring.

Image: No neutral wire required feature.

Instruções de fiação

  1. Desligue a alimentação: Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltage testador.
  2. Remover switch existente: Remova cuidadosamente o interruptor antigo da caixa de parede.
  3. Identificar os fios: Identify the Line (Hot), Load, Ground, and Traveler wires (for 3-way installations). It is recommended to take a picture of the existing wiring before disconnecting.
  4. Conecte os fios: Refer to the wiring diagrams below for single-pole and 3-way installations. Use wire nuts to secure connections.
    • Fio preto: Connect to the Line (Hot) wire.
    • Fio vermelho: Connect to the Load wire.
    • Fio verde: Connect to the Ground wire.
    • Red & White wire: This wire is used only in 3-way installations. For single-pole installations, cap this wire with a wire nut. In 3-way installations, connect it to one of the Traveler wires.
  5. Mount the dimmer: Gently push the wired dimmer switch into the wall box and secure it with the provided screws.
  6. Instalar placa de parede: Attach your desired wall plate (not included).
  7. Restaure a energia: Ligue novamente a energia no disjuntor.
Wiring diagrams for Single Pole and 3-Way dimmer switch installations, showing connections for Black (Hot), Green (Ground), Red (Load), and Red & White (Traveler) wires.

Image: Single Pole and 3-Way Wiring Diagrams.

Importante para aplicações de 3 vias

For 3-way switches, there are three terminals besides the ground. One terminal is typically a different color than the other two. Label this wire as the Line/Load. The other two terminals connect to the Traveler wires. Caution: Only one dimmer switch can be installed in a 3-way circuit.

Instruções de operação

The BESTTEN Super Slim Dimmer Switch features a rocker switch for ON/OFF control and a slide dimmer for brightness adjustment.

  • Ligando / desligando: Press the bottom part of the rocker switch to turn the lights ON, and the top part to turn them OFF.
  • Ajustando o brilho: Use the vertical slider on the side of the rocker switch to adjust the light level. Slide up for brighter light and down for dimmer light.

Dimming Range Setting (Sensitivity Dial)

To optimize performance and eliminate flickering with certain bulb types, you may need to adjust the dimmer's sensitivity dial. This small dial is located on the side of the dimmer switch, accessible after removing the wall plate.

  1. Turn on the switch and move the slide dimmer to its lowest (all the way down) setting.
  2. Rotate the Sensitivity Dial clockwise all the way down. OBSERVAÇÃO: If the dial stops in either direction, do not continue to turn it.
  3. Rotate the Sensitivity Dial counter-clockwise slowly until the preferred lowest light level is achieved and the lights are not flickering.
Diagram illustrating the dimmer switch's slider, rocker switch, and the sensitivity dial for dimming range adjustment. Instructions for adjusting the dial are provided.

Image: Dimming Range Setting with Sensitivity Dial.

Manutenção

To maintain your dimmer switch, ensure power is off before cleaning. Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or internal components. Regular inspection for loose connections or damage is recommended.

Solução de problemas

  • As luzes não acendem:
    • Verifique o disjuntor e certifique-se de que a energia foi restabelecida.
    • Verifique se todas as conexões dos fios estão seguras.
    • Ensure the bulb is functional and correctly installed.
  • Lights flicker, hum, or buzz:
    • Adjust the dimming range using the sensitivity dial as described in the 'Operating Instructions' section.
    • Ensure your bulbs are specifically rated as 'dimmable'. Non-dimmable bulbs will not function correctly with a dimmer.
    • Some dimmable LED/CFL bulbs may not be fully compatible with all dimmers. Consider trying a different brand or type of dimmable bulb.
    • Garanta o valor totaltage of connected bulbs does not exceed the dimmer's maximum load capacity.
  • Dimmer switch is warm to the touch:
    • It is normal for dimmer switches to feel warm during operation. If the dimmer feels excessively hot, ensure the load does not exceed the maximum wattage classificação.
Image showing a family in a living room with text 'Eliminate Flickering' and notes on bulb compatibility and dimming range adjustment.

Image: Information on eliminating flickering.

Garantia e Suporte

BESTTEN products are designed for reliability and performance. For warranty information or technical support, please refer to the manufacturer's official webou entre em contato diretamente com o serviço de atendimento ao cliente. Guarde o comprovante de compra como prova de aquisição.

Você pode encontrar mais informações e detalhes de contato visitando o site. BESTTEN Store on Amazon.

Documentos relacionados - USP-DS07N-6PK

Préview BESTTEN USP-DS07N Super Slim Dimmer Switch User Manual
Comprehensive user manual for the BESTTEN USP-DS07N Super Slim Dimmer Switch, covering single pole and 3-way applications for LED, CFL, and incandescent lighting. Includes installation instructions, specifications, troubleshooting, and warranty information.
Préview Manual do Usuário do Interruptor Dimmer Super Slim BESTTEN USP-DS08
Manual do usuário do interruptor dimmer super fino BESTTEN USP-DS08, detalhando a instalação, a fiação e a solução de problemas para aplicações de polo simples e de três vias com lâmpadas LED, CFL, incandescentes e halógenas.
Préview Manual do Usuário do Dimmer Digital BESTTEN USP-DS03
Manual do usuário do interruptor dimmer digital BESTTEN USP-DS03, abrangendo instalação para aplicações de um polo e três vias, especificações, testes e solução de problemas.
Préview BESTTEN USP-DS09M Super Slim Dimmer Switch Manual: Installation & Operation
Comprehensive user manual for the BESTTEN USP-DS09M Super Slim Dimmer Switch. Learn how to install and operate this single pole or 3-way dimmer for LED, CFL, and incandescent lights.
Préview Guia de Instalação do Interruptor Unipolar Combinado e Tomada Decorativa BESTTEN USP-15-BL
Guia de instalação e informações sobre a garantia do Interruptor Unipolar Combinado com Tomada Decorativa BESTTEN, modelo USP-15-BL. Aprenda como instalar e conectar o dispositivo com segurança para configurações de alimentação comum, alimentação separada ou tomada com interruptor.
Préview Guia de Instalação e Fiação do Interruptor Unipolar BESTTEN USP-LS01
Instruções de instalação e fiação para o interruptor basculante decorativo monopolar silencioso BESTTEN (Modelo: USP-LS01), incluindo avisos de segurança e informações sobre a garantia.