Manual de instruções

Introdução

Obrigado pela compra.asing the Feit Electric 14-inch Black Rectangular Lantern. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Figura 1: Frente view of the Feit Electric 14-inch Black Rectangular Lantern, showcasing its modern design with a clear glass cylinder and an exposed filament bulb.

Informações importantes de segurança

• Always turn off the power at the circuit breaker or fuse box before beginning installation or performing any maintenance.
• Consulte um eletricista qualificado se não tiver certeza sobre o processo de instalação.
• This fixture is designed for outdoor use and is suitable for wet locations.
• Certifique-se de que todas as conexões elétricas sejam feitas de acordo com as normas e regulamentos locais.
• Não exceda o wat especificadotage for the bulb. This fixture includes an integrated LED bulb.
• Manuseie os componentes de vidro com cuidado para evitar quebras.
• Mantenha os materiais de embalagem longe das crianças.

Conteúdo da embalagem

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact Feit Electric customer service for assistance.

Figure 2: The product packaging for the Feit Electric 14-inch Black Rectangular Lantern, showing the lantern inside its box with product details and features.

Typically included components:

• 1 x Lantern Fixture with integrated LED bulb
• 1 x Placa de montagem
• 2 x Parafusos de montagem
• 3 x porcas de arame
• 1 x Gasket/Seal
• 1 x Manual de Instruções (este documento)

Configuração e instalação

Antes de começar, certifique-se de ter as seguintes ferramentas:

• Chave de fenda Phillips
• Chave de fenda de cabeça chata
• Alicates de decapagem de fios
• Fita isolante
• Óculos de segurança
• Escada (se necessário)

Etapas de instalação:

1. Desligar a energia: Locate the circuit breaker or fuse box that controls the power to the outdoor light fixture. Turn off the power completely before proceeding. Verify the power is off using a voltage testador.
2. Remova a luminária antiga (se aplicável): Carefully disconnect and remove any existing light fixture from the junction box.
3. Fixe a placa de montagem: Secure the mounting plate to the junction box using the provided mounting screws. Ensure the plate is level and firmly attached.
4. Faça conexões elétricas:
   • Conecte o preto fio da luminária para o preto Conecte o fio (fase) da caixa de junção usando um conector de fios.
   • Conecte o branco fio da luminária para o branco Conecte o fio neutro da caixa de junção usando um conector de fios.
   • Conecte o verde ou fio de cobre nu (terra) da luminária até o verde or bare copper (ground) wire from the junction box using a wire nut. If no ground wire is available in the junction box, connect to the ground screw on the mounting plate.
   • Ensure all connections are secure and cover wire nuts with electrical tape for added insulation.
5. Monte o dispositivo: Carefully align the fixture with the mounting plate. Secure the fixture to the mounting plate using the provided screws, ensuring a snug fit against the wall. If a gasket is provided, place it between the fixture and the mounting surface for a weather-tight seal.
6. Restaurar energia: Após a instalação segura da luminária e todas as conexões estarem feitas, restabeleça a energia no disjuntor.

Figure 3: The Feit Electric 14-inch Black Rectangular Lantern installed on the exterior wall of a house during daylight, demonstrating its aesthetic integration.

Instruções de operação

This Feit Electric lantern features a built-in Dusk-to-Dawn sensor, allowing for automatic operation.

• Operação automática: The integrated sensor will detect ambient light levels. The lantern will automatically turn on at dusk and turn off at dawn.
• Substituição manual (se aplicável): If connected to a wall switch, the fixture can be manually turned on or off. For continuous automatic operation, ensure the wall switch remains in the "ON" position.
• Recurso regulável: This fixture is dimmable. Ensure you use a compatible LED dimmer switch for optimal performance. Refer to the dimmer switch manufacturer's instructions for proper installation and operation.

Figure 4: The Feit Electric 14-inch Black Rectangular Lantern illuminated at night on the exterior of a house, showcasing its soft white light output.

Manutenção

The Feit Electric 14-inch Black Rectangular Lantern is designed for minimal maintenance.

• Limpeza: Para limpar a luminária, certifique-se de que a energia esteja desligada. Use um pano macio e seco.amp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
• Substituição de lâmpada: This fixture features an integrated LED bulb designed for long life. The bulb is not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced. Contact Feit Electric customer service for assistance.
• Inspeção: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly to ensure safe and proper operation.

Solução de problemas

Especificações

Garantia e Suporte

Feit Electric products are manufactured to the highest quality standards. For warranty information, technical support, or to inquire about replacement parts, please contact Feit Electric customer service directly. Please have your model number (B0F8DYQLSF) and purchase date available when contacting support.

Visite o site oficial da Feit Electric. webPara obter detalhes de contato e informações adicionais sobre o produto, acesse o site: www.feit.com