ARRIS Jumper Bumblebee 2.4GHz 1W ELRS Long Range RC Transmitter User Manual

1. Introdução

This manual provides essential information for the safe and effective operation of your ARRIS Jumper Bumblebee 2.4GHz 1W ELRS Long Range RC Transmitter. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

2. Produto acabadoview

The Jumper Bumblebee is a compact and ergonomic radio transmitter designed for remote control aircraft, including FPV drones, fixed-wing aircraft, and quadcopters. It features a built-in 1000mW ExpressLRS (ELRS) module for long-range, stable control and comes pre-installed with the EdgeTX firmware for advanced customization and fast response times.

Principais características:

• Integrated ELRS Module: 1000mW (30dBm) output for extended range and reliable signal.
• Firmware EdgeTX: Preloaded for advanced functionality and user-friendly interface.
• Hall Sensor Gimbals: Provides precise and durable control input.
• Display OLED: 1.3-inch 128x64 resolution screen for clear information display.
• Design ergonômico: Gamepad-style layout for comfortable grip and portability.
• Antena ajustável: Foldable antenna for convenience and optimal signal orientation.
• Conectividade USB-C: Para carregamento e atualizações de firmware.

Componentes do transmissor:

3. Configuração

3.1 Desembalagem

The package includes the Jumper Bumblebee radio transmitter. Inspect the contents for any damage. If any components are missing or damaged, contact your retailer.

3.2 Instalação da bateria

The Jumper Bumblebee requires two 18650 batteries (not included). To install:

1. Localize o compartimento da bateria na parte traseira do transmissor.
2. Remove the anti-slip battery cover.
3. Insira duas baterias 18650, certificando-se da polaridade correta, conforme indicado dentro do compartimento.
4. Recoloque a tampa da bateria com segurança.

3.3 Inicialização

Press and hold the power button located on the front of the transmitter until the OLED screen illuminates. The EdgeTX system will boot up.

3.4 Binding with Receivers

The Jumper Bumblebee utilizes the ExpressLRS (ELRS) protocol. To bind your transmitter with an ELRS receiver (e.g., EP1, EP2, BetaFPV, Happymodel), follow the specific binding procedure for your receiver. Generally, this involves:

1. Power on your receiver.
2. Initiate binding mode on the receiver (often by cycling power three times or pressing a bind button).
3. On the transmitter, navigate to the ELRS module settings within EdgeTX and select the 'Bind' option.
4. Confirm successful binding via the receiver's LED indicator.

3.5 atualizações de firmware

The transmitter's firmware can be updated via the USB-C port. Refer to the official EdgeTX documentation for detailed instructions on updating the firmware.

4. Instruções de operação

4.1 Controles Básicos

• Cardan: Control the primary movements of your aircraft (throttle, yaw, pitch, roll).
• Interruptores: Utilize the various two-position and six-position switches for auxiliary functions such as arming, flight modes, or special actions.
• Botões de ajuste: Adjust the neutral position of your control surfaces for stable flight.
• Scroll Wheel & Confirmation Button: Used for navigating menus and confirming selections on the OLED screen.
• Botão de menu: Access the main menu of the EdgeTX system.
• Botão de página: Cycle through different pages or screens within the EdgeTX menu.
• Botão RTN: Retornar ao menu ou tela anterior.

4.2 EdgeTX Menu Navigation

The EdgeTX firmware provides extensive customization options. Use the scroll wheel to navigate through menu items and the confirmation button to select. The menu button accesses the main menu, while the page and RTN buttons assist in navigating through different settings and returning to previous screens.

4.3 Utilização do Simulador

The Jumper Bumblebee can be used with flight simulators. Connect the transmitter to your computer via the USB-C port or a 3.5mm standard PPM output cable. Configure your simulator software to recognize the transmitter as a joystick or game controller.

5. Manutenção

5.1 Cuidados com a bateria

• Always use high-quality 18650 batteries.
• Charge batteries using the integrated USB-C port or an external 18650 charger.
• Do not overcharge or deeply discharge batteries.
• Remove batteries if the transmitter will not be used for an extended period.

5.2 Limpeza

Clean the transmitter with a soft, dry cloth. Avoid using harsh chemicals or solvents that could damage the plastic or electronic components.

5.3 atualizações de firmware

Regularly check for and install the latest EdgeTX firmware updates to ensure optimal performance and access to new features. Instructions are available on the official EdgeTX website.

6. Solução De Problemas

• O transmissor não liga: Certifique-se de que as baterias estejam instaladas e carregadas corretamente.
• Questões de encadernação: Verify both transmitter and receiver are in bind mode and using compatible ELRS firmware versions. Check receiver documentation for specific binding steps.
• No control response: Confirm successful binding. Check model settings in EdgeTX. Ensure receiver is powered and correctly connected to the flight controller.
• Gimbal calibration: If controls feel off, perform a gimbal calibration through the EdgeTX system menu.

For more detailed troubleshooting and support, refer to the official EdgeTX documentation or contact ARRIS customer support.

7. Especificações

8. Garantia e Suporte

For warranty information and technical support, please contact the retailer where you purchased the ARRIS Jumper Bumblebee transmitter or visit the official ARRIS website. Guarde o comprovante de compra para solicitações de garantia.