Insoma 2-Zone Sprinkler Timer

Introdução

The Insoma 2-Zone Sprinkler Timer is a programmable device designed to automate watering for your lawn, garden, and drip systems. It features independent control for two zones, allowing for customized watering schedules to optimize water usage and promote plant health. This manual provides detailed instructions for the setup, operation, and maintenance of your new sprinkler timer.

Figure 1: Insoma 2-Zone Sprinkler Timer main unit with digital display and control dial.

Principais características

• 2 Independent Watering Zones: Customize schedules for different areas.
• Programação de horários: Set start times, watering duration (1 minute to 23h 59mins), and frequency (1 hour to 7 days).
• 3 modos de rega manual: Temporarily water Zone 1, Zone 2, or both without altering preset schedules.
• Modo de atraso por chuva: Pause watering for 1 to 7 days to conserve water during rainy periods.
• Design à prova de vazamentos: Reinforced nylon connector, metal filter, 3 sealing gaskets, and thread-sealing tape ensure durability and prevent leaks.
• Low Battery Alert & Child Lock: Visual warning for low battery with automatic valve closure, and a child lock feature to prevent accidental program changes.
• Fácil instalação: 360° rotatable interface, clear LED display, and compatibility with standard 3/4" or 1/2" garden hoses.
• IPX5 Impermeável: Designed to withstand everyday outdoor use.

Figure 2: Visual representation of the timer's key features and design elements.

Conteúdo da embalagem

• Insoma 2-Zone Sprinkler Timer Unit
• Manual do usuário
• Filtro de metal
• Sealing Gaskets (3x)
• Thread-Sealing Tape
• 1/2" Quick Hose Fittings (2x)

Note: 2 AA 1.5V alkaline batteries are required and not included.

Figure 3: The sprinkler timer unit and its accompanying accessories.

Configurar

1. Instalação da bateria

1. Localize o compartimento da bateria na parte traseira do temporizador.
2. Remova a tampa da bateria.
3. Insert two (2) new AA 1.5V alkaline batteries, ensuring correct polarity.
4. Replace the battery cover, ensuring the sealing rubber ring is properly seated to maintain waterproof integrity.

2. Attaching to Faucet

1. Certifique-se de que a torneira esteja fechada.
2. Thread the timer's inlet connector onto your outdoor faucet. The 360° rotatable interface allows for easy positioning.
3. Tighten securely by hand. For optimal leak prevention, ensure the metal filter and a sealing gasket are in place within the inlet.

3. Mangueiras de conexão

1. Connect your garden hoses to the Zone 1 and Zone 2 outlets at the bottom of the timer.
2. If using 1/2" hoses, attach the provided quick hose fittings first.
3. For a secure, leak-free connection, apply thread-sealing tape to the hose threads before attaching them to the timer outlets.
4. Turn on your outdoor faucet. The timer is designed to handle water pressure from 7.25psi to 116psi.

Video 1: Detailed guide on installing the 2-Zone Sprinkler Timer, including battery insertion, faucet attachment, and hose connections.

Instruções de operação

The timer features a large, clear LED display and an intuitive dial for programming. Rotate the dial to select the desired setting, then use the '+' and '-' buttons to adjust values, and 'OK' to confirm.

1. Ajustando o relógio

1. Turn the dial to 'Set Clock'.
2. Use '+' and '-' to set the current hour, then press 'OK'.
3. Use '+' and '-' to set the current minute, then press 'OK'.

2. Setting Start Time (PROG)

You can set up to 3 programs (P1, P2, P3) for each zone.

1. Turn the dial to 'PROG'.
2. Use the 'Zone' button to select Zone 1 or Zone 2.
3. Use '+' and '-' to set the desired start hour for P1, then press 'OK'.
4. Use '+' and '-' to set the desired start minute for P1, then press 'OK'.
5. Repeat for P2 and P3 if needed.

3. Setting Watering Duration ('How Long')

1. Turn the dial to 'How Long'.
2. Use the 'Zone' button to select Zone 1 or Zone 2.
3. Use '+' and '-' to set the desired watering duration in hours, then press 'OK'.
4. Use '+' and '-' to set the desired watering duration in minutes, then press 'OK'. (Duration can be set from 1 minute to 23 hours 59 minutes).

4. Setting Watering Frequency ('How Often')

1. Turn the dial to 'How Often'.
2. Use the 'Zone' button to select Zone 1 or Zone 2.
3. Use '+' and '-' to set the desired frequency (e.g., every 1 hour, every 24 hours, or every 7 days), then press 'OK'.

Figura 4: Example of setting watering duration and frequency in Hour Cycle Mode.

Figura 5: Example of setting watering duration and frequency in Day Cycle Mode.

Video 2: Step-by-step instructions on how to program the water timer, including setting the clock, start times, duration, and frequency.

5. Modo Automático

After setting all desired programs, turn the dial to 'AUTO'. The timer will now operate automatically according to your programmed schedules for both zones.

6. Modo de rega manual

This mode allows for temporary watering without affecting your preset schedules.

1. Turn the dial to 'AUTO'.
2. Press the 'OK/Manual' button.
3. Use the 'Zone' button to select Zone 1, Zone 2, or both.
4. Use '+' and '-' to set the desired manual watering duration (1-59 minutes), then press 'OK'. Water will flow for the set duration and then stop.
5. To stop manual watering early, press 'OK/Manual' again.

Figure 6: Manual watering in progress, demonstrating flexibility for immediate watering needs.

7. Modo de atraso por chuva

To prevent overwatering during rainy weather, you can pause your watering schedule.

1. Turn the dial to 'AUTO'.
2. Press and hold the '+' button for 3-5 seconds. The display will show 'D' for delay.
3. Use '+' and '-' to select the desired delay duration (1-7 days), then press 'OK'.
4. The timer will pause for the selected duration and then resume its normal schedule.
5. To cancel the rain delay, press and hold the '+' button again for 3-5 seconds.

Figure 7: The timer unit during a rain delay, indicating water conservation.

8. Bloqueio para crianças

The child lock feature prevents accidental changes to your programmed settings.

1. Turn the dial to 'AUTO'.
2. Press and hold the '-' button for 3-5 seconds to activate the child lock. A lock icon will appear on the display.
3. To deactivate, press and hold the '-' button again for 3-5 seconds. The lock icon will disappear.

Manutenção

1. Alerta de bateria fraca

When the battery level is low, the screen will flash a warning. If the battery is critically low, the valve will automatically close to prevent continuous water flow and waste. Replace batteries promptly when the alert appears.

Figure 8: The timer display indicating a low battery status and automatic valve shutdown.

2. Limpeza do filtro

The timer includes a metal filter at the inlet to prevent impurities from entering the system. Periodically inspect and clean the filter to ensure optimal water flow and prevent damage to the internal solenoids.

3. Preparação para o inverno

During winter months or when temperatures are expected to drop below freezing, it is recommended to disconnect the timer from the faucet and store it indoors in a dry, frost-free location. This prevents potential damage from freezing water.

Solução de problemas

• Sem fluxo de água: Check if the faucet is fully open. Ensure batteries are not low or depleted. Verify that the program is set to 'AUTO' and a watering schedule is active.
• Vazamentos na Connections: Ensure all connections are tightened securely. Check for proper placement of sealing gaskets and apply thread-sealing tape if necessary. Inspect hoses for damage.
• Incorrect Watering Times: Re-check your 'Set Clock', 'Start Time', 'How Long', and 'How Often' settings for each zone. Ensure the timer is in 'AUTO' mode.
• Tela não funciona: Replace batteries. If the issue persists, contact customer service.

Especificações

• Marca: Insoma
• Número do modelo: SGW06M-N
• Dimensões do produto: 2.7 x 4 x 4 inches (0.47 Kilograms)
• Peso do item: 1.04 libras
• Cor: Preto
• Faixa de pressão da água: 7.25 psi a 116 psi
• Duração da rega: 1 minuto a 23 horas e 59 minutos
• Fonte de energia: 2 pilhas alcalinas AA de 1.5 V (não incluídas)
• Classificação à prova d'água: IPX5

Garantia e Suporte

The Insoma 2-Zone Sprinkler Timer comes with a Garantia de 12 meses. If you have any questions, concerns, or require assistance with your watering timer, please do not hesitate to contact our customer service team. We are dedicated to providing reliable support for all your watering needs.