PetJoy 3 Dog Shock Collar User Manual

Introdução

The PetJoy 3 Dog Shock Collar system is designed to assist in training up to three dogs simultaneously or individually. It features both automatic bark detection and remote-controlled training modes, including beep, vibration, and static stimulation. This manual provides comprehensive instructions for setup, operation, maintenance, and troubleshooting to ensure effective and safe use of the device.

Informações de segurança

• This device is intended for training purposes only. Do not use it as a punishment tool.
• Not suitable for aggressive dogs. Consult a professional dog trainer if your dog exhibits aggressive behavior.
• Não deixe a coleira no seu cão por mais de 12 horas por dia para evitar irritação na pele.
• Verifique regularmente o pescoço do seu cão para detectar sinais de irritação ou feridas. Caso ocorra irritação, suspenda o uso até que a pele esteja curada.
• Mantenha fora do alcance de crianças.
• Ensure proper fit; the collar should be snug but not overly tight.
• Always start with the lowest stimulation level and gradually increase as needed.

Conteúdo da embalagem

Verifique se todos os itens listados abaixo estão incluídos no seu pacote:

• 3 x alças de colarinho
• 1 x Clicker
• 3 x Shock Collar Receivers
• 1 x Controle Remoto
• 2 x Charging Wires
• 1 x Cordão

Image: All components included in the PetJoy 3 Dog Shock Collar package.

Produto acimaview

Familiarize yourself with the main components of your PetJoy training system.

Image: The PetJoy 3 Dog Shock Collar system, including three receiver collars and the remote control.

Controle remoto

• Tela de exibição: Shows battery level, selected dog channel, mode, and intensity level.
• Botões de modo: Botões separados para bip, vibração e estimulação estática.
• +/- Botões: Adjust intensity levels for Vibration and Static Stimulation.
• Botão do canal: Switch between dog channels (1, 2, 3) or control all simultaneously.
• Botão de energia: Turns the remote on/off and activates/deactivates Auto Mode on the receiver.

Colar receptor

• Pontos de contato: Deliver static stimulation. Ensure proper contact with the dog's skin.
• Auto Mode Sensor Hole: Detects barking for automatic correction.
• Porta de carregamento: Para recarregar a bateria do receptor.
• Indicador LED: Mostra o status de energia, o status de carregamento e a ativação do modo.

Guia de configuração

1. Carregando os dispositivos

Before first use, fully charge the remote control and all receiver collars. Use the provided charging cables.

• Connect the charging cable to the charging port on the remote and receivers.
• Plug the USB end into a USB power adapter (not included), computer, or power bank.
• The LED indicator on the receiver will show charging status (e.g., red while charging, green when full). The remote display will show battery icon filling up.
• Charging typically takes 2-3 hours. A full charge provides approximately 90 days of work time for the remote and 30 days for receivers.

Image: Charging the remote and receiver collars.

2. Pairing the Remote and Collars

Each receiver collar needs to be paired with the remote control.

1. Ligue o controle remoto.
2. Select the desired channel (1, 2, or 3) for the collar you are pairing using the Channel button.
3. Com a coleira receptora desligada, pressione e mantenha pressionado o botão liga/desliga até que o indicador LED pisque rapidamente.
4. While the receiver LED is flashing, press any mode button (Beep, Vibration, or Shock) on the remote control.
5. If pairing is successful, the receiver LED will stop flashing and remain solid, and the remote will confirm the connection.
6. Repeat for additional collars, selecting a different channel for each.

3. Ajustando a gola

Proper fit is crucial for effective and safe operation.

• Position the receiver on the underside of your dog's neck, directly below the chin.
• Ensure the contact points touch your dog's skin. You may need to trim long fur for better contact.
• Adjust the strap so it is snug, allowing only one finger to fit comfortably between the strap and your dog's neck.
• The collar should not be too loose, as this can cause inconsistent stimulation and rubbing. It should not be too tight, as this can restrict breathing or cause discomfort.

Instruções de operação

Modos de treinamento

The PetJoy collar offers four training modes:

• Modo de bipe: Delivers an audible tone. This is often used as a warning or positive reinforcement signal.
• Modo de vibração: Delivers a non-harmful vibration. Intensity is adjustable from 1-100 levels.
• Modo de choque: Delivers a static stimulation. Intensity is adjustable from 1-100 levels. Always start at the lowest level and increase gradually.
• Modo automático: The collar automatically detects and corrects barking. It has 5 sensitivity levels and a sequence of corrections (Beep, then Vibration, then Static Stimulation) if barking persists.

Image: Detailed activation sequences for the automatic bark detection mode.

Image: The collar's ability to operate in Auto Mode independently.

Controlando vários cães

The remote allows you to control up to three collars individually or all at once.

• Use o Botão de canal on the remote to switch between Dog 1, Dog 2, Dog 3, or a universal channel to control all paired collars simultaneously.
• Ensure each collar is paired to a unique channel for individual control.

Image: Controlling multiple dogs with the remote.

Adjusting Sensitivity (Auto Mode)

To adjust the sensitivity of the automatic bark detection mode:

• With the receiver collar turned on, quickly press its power button 3 times.
• The LED indicator will flash a certain number of times to indicate the current sensitivity level (1-5 flashes).
• Continue pressing the power button 3 times in quick succession to cycle through the 5 sensitivity levels. Level 1 is the least sensitive, and Level 5 is the most sensitive.
• Select a sensitivity level appropriate for your dog's barking habits and environment.

Activating/Deactivating Auto Mode

You can turn the automatic bark detection mode on or off via the remote control.

• Ensure the remote and receiver are paired and within range.
• Press and hold the remote control's power button.
• You will hear the receiver beep once to confirm Auto Mode is turned ON, or twice to confirm it is turned OFF.

Manutenção

Limpeza

• Limpe regularmente a coleira receptora e os pontos de contato com um produto de limpeza.amp pano.
• Ensure the contact points are free of dirt, debris, or corrosion.
• Não use produtos químicos fortes ou produtos de limpeza abrasivos.

Cuidados com a bateria

• Carregue os dispositivos completamente antes de longos períodos de inatividade.
• Armazene em local fresco e seco.
• Evite temperaturas extremas, que podem afetar a vida útil da bateria.

Impermeabilização

The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This makes it suitable for use in rainy conditions or during swimming.

Image: The collar's IPX7 waterproof capability.

Solução de problemas

Especificações

Garantia e Suporte

The PetJoy 3 Dog Shock Collar comes with a Garantia de 2 anos a partir da data da compra, cobrindo defeitos de fabricação e mau funcionamento em condições normais de uso.

For detailed warranty information, technical support, or any inquiries, please refer to the official user guide or contact PetJoy customer service.

Guia oficial do usuário (PDF): Baixe aqui

PetJoy Brand Store: Visite a loja