Manual do Usuário da Placa-Mãe MACHINIST H110 LGA 1151

Introdução

This manual provides detailed instructions for the installation, operation, and maintenance of your MACHINIST H110 LGA 1151 Motherboard. Please read this guide thoroughly before proceeding with installation to ensure proper setup and functionality. This motherboard is designed to support Intel 6th/7th generation Core i3/i5/i7, Pentium, and Celeron Series CPUs.

Conteúdo da embalagem

O pacote inclui os seguintes itens:

• 1 x MACHINIST H110 Motherboard
• 1 x cabo SATA
• 1 x Defletor de E/S

Observação: The motherboard does not include a CMOS battery. A user manual is not physically included in the package; this digital document serves as the user manual.

Figure 1: Package Contents. This image displays the MACHINIST H110 motherboard, a SATA data cable, and an I/O baffle, which are typically included in the product box.

Principais características

• Soquete LGA 1151: Compatible with Intel 6th/7th generation Core i3/i5/i7, Pentium, and Celeron Series processors.
• Dual Channel DDR4 Memory: Two DDR4 Non-ECC memory slots supporting up to 32GB (16GB per slot) with a maximum frequency of 2400MHz.
• Interface NVME/SATA M.2: Supports both NVME (PCIe channel) and SATA (SATA channel) M.2 SSDs, with manual conversion capability.
• Conectividade: Features PCIe 2.0 X16 slot, SATA 3.0 ports, USB 3.0, USB 2.0, VGA, and HDMI for high-definition video output (requires CPU with integrated graphics).
• Design de energia: 4+1 Phase Power Supply with PWM Controller RT3607BC.
• Rede: Realtek 8111H Gigabit network card.

Motherboard Layout and Components

Familiarize-se com os diversos componentes e conectores da placa-mãe antes da instalação.

Figure 2: H110 Motherboard Interface Details. This image illustrates the location of key components and ports on the motherboard, including USB 2.0, USB 3.0, HDMI, VGA, LAN, Audio jacks, PCIe X16 slot, SATA 3.0 ports, NVME/NGFF M.2 slot, 8-pin DC power, 24-pin DC power, and fan headers.

Configuração e instalação

1. Instalação da CPU

Carefully align your LGA 1151 CPU with the socket. Ensure the triangular mark on the CPU matches the mark on the socket. Gently lower the CPU into the socket without forcing it. Close the load plate and secure the lever.

Figure 3: Intel LGA 1151 Socket. This image shows the LGA 1151 CPU socket, indicating where the processor should be placed.

2. Instalação da memória (RAM)

Locate the two DDR4 memory slots. Open the clips on both ends of the slot. Align the memory module with the slot, ensuring the notch on the module matches the key in the slot. Press down firmly on both ends of the memory module until the clips snap into place.

Figure 4: Dual Channel DDR4 Memory Slots. This image displays the two DDR4 memory slots, capable of supporting up to 32GB of RAM at 2400MHz.

3. Instalação de dispositivos de armazenamento (M.2 / SATA)

SSD M.2: The motherboard features an M.2 interface that supports both NVME and NGFF (SATA) protocols. The default mode is NVME. To switch between NVME and NGFF modes, refer to the manual conversion instructions or the diagram on the motherboard. Insert the M.2 SSD into the slot at an angle and secure it with the provided screw.

Figure 5: NVME/SATA M.2 Hard Disk Interface. This image explains the M.2 interface's dual compatibility with NVME and SATA protocols, and the manual conversion process.

Unidades SATA: Connect your SATA hard drives or SSDs to the SATA 3.0 ports using SATA data cables. Ensure the power cable from your power supply is also connected to the SATA drive.

4. Conexões de energia

Connect the 24-pin ATX power connector from your power supply to the main power socket on the motherboard. Also, connect the 8-pin CPU power connector to the corresponding socket near the CPU.

5. Conexões do Painel Frontal

Connect the front panel headers (Power LED, HDD LED, Power Switch, Reset Switch) from your computer case to the corresponding pins on the motherboard. Refer to the motherboard layout diagram (Figure 2) for pin locations.

Instruções de operação

After completing all hardware installations, connect your monitor, keyboard, and mouse. Power on your system. The system should boot to the BIOS/UEFI interface or your operating system if already installed. To enter the BIOS/UEFI setup, typically press the DEL or F2 tecla durante a inicialização.

For optimal performance, it is recommended to install the latest drivers for your motherboard components. Drivers can often be found on the manufacturer's website or by using driver management software like Driver Talent, especially for Windows 10 systems.

Manutenção

CMOS Reset Procedure

If you encounter system instability or issues related to BIOS settings, performing a CMOS reset can resolve them. Follow these steps:

1. Desconecte a energia: Desligue o computador e desconecte o cabo de alimentação da tomada.
2. Remova a bateria CMOS: Locate the small coin-cell battery (CR2032) on the motherboard and carefully remove it.
3. Jumper CMOS curto-circuitado: Find the "Clear CMOS" jumper (usually labeled CLR_CMOS or similar). Use a metal object (like a screwdriver or tweezers) to short the two pins for approximately 5 seconds.
4. Reinstale a bateria e a fonte de alimentação: Reinstall the CMOS battery, plug in the power cord, and restart your computer.

Figure 6: CMOS Reset Method. This image illustrates the process of resetting the CMOS by removing the battery and shorting the designated pins.

Regularly clean dust from your computer's interior to prevent overheating and ensure optimal performance.

Solução de problemas

• System Will Not Power On (Fans Don't Spin):

  Verify motherboard and CPU power connections are secure. Confirm CPU and memory model compatibility and condition. Ensure memory modules are properly seated. If the issue persists, clear the CMOS (refer to Maintenance section).
• No Display (Fans Spin, Keyboard Lights Unresponsive to Caps Lock):

  Verify motherboard and CPU power connections. Ensure memory modules are properly seated. Confirm CPU and memory model compatibility and condition. If issues persist, clear the CMOS.

• No Display (Fans Spin, Keyboard Caps Lock Indicator Lights Up):

  Verify the monitor is powered on and the display data cable is securely connected. If no external graphics card (GPU) is installed, confirm your CPU supports integrated graphics. If an external GPU is installed, ensure the display cable is connected to its output port. Check the condition of the display cable, GPU, and monitor. If the issue persists, clear the CMOS.

Especificações

Informações de garantia

Para obter informações detalhadas sobre os termos e condições da garantia, consulte o manual oficial da MACHINIST. website or contact your point of purchase. Standard manufacturer warranty policies apply to this product.

Suporte e Contato

If you require further assistance or have questions not covered in this manual, please visit the official MACHINIST support page or contact their customer service. You can find contact information on the MACHINIST brand store page or their official website.

Recursos on-line:

• MACHINIST Brand Store on Amazon
• For driver downloads, consider using Talento do motorista or utilize Windows 10's built-in driver management.