Anderic MRAC06S1M

Anderic MRAC06S1M Ceiling Fan Receiver Instruction Manual

Model: MRAC06S1M

Produto acimaview

The Anderic MRAC06S1M is a replacement ceiling fan receiver specifically designed for use with Harbor Breeze Mazon ceiling fans. This receiver facilitates the remote control functionality of your ceiling fan, managing fan speeds and light operation. It is engineered for a plug-and-play installation, connecting directly into the fan's motor assembly via a square plug connector.

This receiver is compatible with various Harbor Breeze Mazon models, including 0807421, 2599776, 1059534, MZ44WW3LR, MZ44MBLK3LR, and others. It also works seamlessly with existing Anderic remote models such as RRTR214D, A25-FA0138, KUJCE10311, TR214B, KUJCE10712, TR214A, KUJCE10610, and 2BB78ITLF304C.

Informações importantes de segurança

Conteúdo da embalagem

Note: Remote control is not included and must be purchased separately if needed. This receiver is designed to work with existing compatible remotes.

Configuração e instalação

The Anderic MRAC06S1M receiver is designed for a straightforward plug-and-play installation into compatible Harbor Breeze Mazon ceiling fans. Ensure your fan's existing receiver uses a square plug connector for direct replacement.

Lista de verificação de pré-instalação:

  1. Verify that your ceiling fan model is listed as compatible or uses a square plug connector for its receiver.
  2. Ensure you have the necessary tools (e.g., screwdriver, wire strippers if any wiring adjustments are needed, though typically not for plug-and-play).
  3. Confirm power is OFF at the circuit breaker before proceeding.

Etapas de instalação:

  1. Desconecte a energia: Turn off the power to the ceiling fan at the main circuit breaker. Verify power is off using a voltage testador.
  2. Access Fan Housing: Carefully lower the canopy or access the motor housing of your ceiling fan where the existing receiver is located.
  3. Remover o receptor antigo: Disconnect the existing receiver from the fan's wiring. Note the orientation and connection points if possible, though the square plug design simplifies this.
  4. Install New Receiver: Connect the Anderic MRAC06S1M receiver into the fan's motor assembly. The square plug connector should fit directly into the corresponding port. Ensure it is seated firmly.
  5. Receptor seguro: Carefully tuck the receiver and wires back into the fan housing, ensuring no wires are pinched.
  6. Restaurar energia: Replace the fan canopy and turn the power back on at the circuit breaker.
  7. Funcionalidade de teste: Use your compatible remote control to test the fan speeds and light operation.
Frente view of the Anderic MRAC06S1M ceiling fan receiver with wires and square connector.

Figura 1: Frente view of the Anderic MRAC06S1M receiver, showing its compact design and integrated wiring with the square plug connector.

Angulado view of the Anderic MRAC06S1M receiver, highlighting the square plug connector.

Figura 2: Angulado view of the receiver, clearly showing the distinctive square plug connector essential for plug-and-play compatibility with Harbor Breeze Mazon fans.

Voltar view of the Anderic MRAC06S1M receiver showing product label with model number and electrical specifications.

Figura 3: Voltar view of the receiver, displaying the product label with model number MRAC06S1M-LD-F0, input voltage (AC120V 60Hz), and maximum load ratings for motor and light.

Lado view of the Anderic MRAC06S1M receiver showing capacitor details and QC pass sticker.

Figura 4: Lateral view of the receiver, showing the capacitor specifications (5+6UF/250V) and a QC Pass sticker, indicating quality control inspection.

Nota importante sobre compatibilidade:

This receiver is designed for fans where the receiver connects directly into the motor assembly with a square plug. If your existing receiver connects at the canopy with standard wire connections (individual wires that need to be spliced or connected via wire nuts), this MRAC06S1M receiver will não be a plug-and-play replacement and may not be compatible without significant modification.

Instruções de operação

Once the Anderic MRAC06S1M receiver is correctly installed, it will enable remote control functionality for your ceiling fan. This receiver is designed to work with specific Anderic and compatible remote models.

Compatible Remote Controls:

The MRAC06S1M receiver is fully compatible with the following remote control models:

Note: The TR214D remote control is often required for initial pairing or full functionality and is not included with the receiver.

Pairing the Remote (if necessary):

Most compatible remotes will automatically pair or have a simple pairing procedure. Refer to your specific remote control's instruction manual for detailed pairing steps. Typically, this involves:

  1. Ensure power to the fan is on.
  2. Within a short timeframe (e.g., 30 seconds) of restoring power, press and hold a specific button on the remote (often a "Learn" button, "Fan Off" button, or a combination of buttons) until the fan light blinks or the fan responds.
  3. Test all functions (fan speeds, light on/off, dimming if applicable).

Manutenção

The Anderic MRAC06S1M receiver is a sealed electronic component and requires minimal maintenance. Follow these guidelines to ensure its longevity:

Solução de problemas

If you experience issues with your ceiling fan after installing the MRAC06S1M receiver, refer to the following common problems and solutions:

Problem: Fan or Light Does Not Respond to Remote

Problem: Fan Operates Intermittently or Incorrectly

Problem: Light Flickers or Does Not Turn On

If problems persist after following these steps, consult a qualified electrician or contact Anderic customer support.

Especificações

RecursoDetalhe
Nome do modeloMRAC06S1M
Nº do modelo do fabricante.MRAC06S1M-LD-F0
MarcaAndérico
Vol de entradatageCA 120 V 60 Hz
Max Load Motor1.0A
Max Load Light (Incandescent)100 W
Max Load Light (LED)60 W
Temperatura operacional (Ta)40°C
CorPreto
Peso do item3.36 onças
Tipo de controladorButton Control (via compatible remote)
Recurso especialPlug-in-play, Must pair with TR214D remote (not included)
UPC191713654939

Garantia e Suporte

For warranty information and customer support regarding your Anderic MRAC06S1M Ceiling Fan Receiver, please contact Anderic directly or refer to their official webGuarde o comprovante de compra como prova de aquisição.

Anderic Official Website: www.anderic.com

Para obter mais ajuda, você também pode consultar a página do produto na Amazon: Página do produto na Amazon

Documentos relacionados - MRAC06S1M

Préview Instruções de controle remoto do ventilador de teto Anderic RRTX012 e FD40-H02R
Guia completo para os controles remotos dos ventiladores de teto Anderic RRTX012 e FD40-H02R, abrangendo instalação, configuração, substituição de bateria, pareamento remoto e operação detalhada das velocidades do ventilador, iluminação, temporizadores e recursos especiais como Home Shield e Walk Away Light Delay.
Préview Guia de Instalação do Receptor do Ventilador de Teto Anderic UC7058RY
Step-by-step installation instructions for the Anderic UC7058RY ceiling fan receiver, including pairing with remote controls and important notes.
Préview Instruções de operação do controle remoto Anderic RRTX012
Instruções de operação para o controle remoto do ventilador de teto Anderic RRTX012, incluindo instalação do suporte de parede, configuração do controle remoto, instalação da bateria, emparelhamento e operação detalhada das velocidades do ventilador, brisa natural, funções de iluminação, atraso na iluminação ao se afastar, proteção residencial, temporizador de sono e memória de desligamento.
Préview Anderic FAN9T and FAN28R/UC7067FCRX Installation Instructions
Detailed installation guide for the Anderic FAN9T and FAN28R/UC7067FCRX ceiling fan remote control system, including receiver wiring, remote pairing, and battery installation.
Préview Guia de Instalação do Receptor do Ventilador de Teto Anderic UC7058RY
Instruções detalhadas de instalação e emparelhamento para o receptor do ventilador de teto Anderic UC7058RY. Inclui notas sobre a compatibilidade com os controles remotos Anderic RR7078TR e RR7083TR. Fornece orientações passo a passo para configuração e sincronização do controle remoto.
Préview Anderic UC7301R / RR7222T Ceiling Fan Remote & Receiver Installation Guide
Step-by-step installation instructions for the Anderic UC7301R Ceiling Fan Receiver and RR7222T Remote Control, covering important safety points, receiver installation, remote pairing, and battery replacement.