WAVLINK WiFi 7 BE5100 Outdoor WiFi Extender (Model WL-WN573HBE2)

1. Introdução

This manual provides detailed instructions for the installation, configuration, and operation of your WAVLINK WiFi 7 BE5100 Outdoor WiFi Extender. This device is designed to provide robust and high-speed wireless connectivity in outdoor environments, supporting multiple operating modes to suit various networking needs.

2. O que está na caixa

• 1 x WAVLINK WiFi 7 BE5100 Outdoor WiFi Extender
• 4 x Omni-directional Detachable Fiberglass Antennas
• 1 x Adaptador PoE
• 1 x adaptador de alimentação CA
• 1 x Cabo Ethernet RJ45
• 1 x kit de montagem na parede
• 1 x Guia de instalação

Figura 2.1: Conteúdo da embalagem

3. Produto acabadoview

The WAVLINK WiFi 7 BE5100 is a high-performance outdoor wireless device featuring the latest Wi-Fi 7 technology. It offers dual-band operation, robust outdoor protection, and flexible deployment options.

3.1 Principais Características

• Dual Band WiFi 7 (802.11be) Standard: Achieves speeds of up to 4323 Mbps on the 5 GHz band and 688 Mbps on the 2.4 GHz band, utilizing 4-stream technology for optimized signal distribution.
• Alcance estendido: Equipped with 4x 8dBi omni-directional detachable fiberglass antennas and two built-in high-power amplifiers, providing up to 300m (radius) WiFi coverage and supporting up to 256 connected devices.
• Suporte Power over Ethernet (PoE): Compatible with both 802.3AF/AT active and passive PoE for flexible power options. Note: The PoE converter is not waterproof and should be protected from moisture.
• Vários modos de trabalho: Supports AP, Router, Repeater, Mesh AP, and Mesh Extender modes to adapt to various network setups. Mesh mode is compatible with other WAVLINK series products.
• Durabilidade ao ar livre: Features an IP67 waterproof housing, 15 KV ESD protection, and 6 KV lightning protection, ensuring reliable operation in harsh weather conditions (rain, snow, wind, thunder).

Figura 3.1: Características do produtoview

Figure 3.2: Designed for Harsh Outdoor Conditions

3.2 Componentes

The device includes four external antennas and a 2.5 Gigabit Ethernet port for WAN/LAN connectivity. A reset button is also present for factory reset or WPS pairing.

Figura 3.3: Dimensões do produto

4. Configuração e instalação

Follow these steps to set up your WAVLINK WiFi 7 BE5100 Outdoor WiFi Extender.

4.1 Instalação da antena

Carefully screw the four omni-directional detachable fiberglass antennas into their respective ports on the top of the extender unit. Ensure they are securely tightened.

4.2 Conexão Power over Ethernet (PoE)

The device is powered via Power over Ethernet. Connect an Ethernet cable (CAT5E or above, not exceeding 100m/328ft) from your network source (router/modem) to the 'LAN DATA IN' port on the PoE adapter. Then, connect another Ethernet cable from the 'POE' port on the adapter to the 2.5G WAN/LAN port on the bottom of the extender. Finally, connect the AC power adapter to the PoE adapter and a power outlet.

Figura 4.1: Diagrama de Conexão PoE

4.3 Montagem Física

Use the provided wall mounting kit to securely attach the extender to a pole or wall in your desired outdoor location. Ensure the device is positioned for optimal signal coverage and away from major obstructions.

Figure 4.2: Mounting Steps

4.4 Configuração Inicial

After physical installation and power-up, connect a computer or mobile device to the extender's default Wi-Fi network (SSID usually found on the device label or quick start guide). Open a web browser and navigate to the default login address (e.g., waplogin.link or 192.168.11.1). Follow the on-screen prompts to set up your desired operating mode, Wi-Fi name (SSID), and password.

5. Modos de operação

The WAVLINK BE5100 supports several operating modes to provide flexibility for different network requirements:

• AP Mode (Access Point): Converte uma conexão de rede com fio em uma conexão sem fio, permitindo que dispositivos sem fio se conectem.
• Modo Repetidor: Extends the coverage of an existing wireless network by repeating its signal.
• Modo roteador: Functions as a primary router, connecting directly to your internet service provider's modem and creating a new wireless network.
• Mesh AP Mode: Acts as the main access point in a Mesh network, providing seamless Wi-Fi coverage with a single SSID.
• Modo extensor de malha: Expands an existing Mesh network, working with other WAVLINK Mesh products to eliminate Wi-Fi dead zones.

Figura 5.1: Múltiplos Modos de Operação

6. Configuração

Acesse o web-based management interface to customize your extender's settings.

6.1 Acessando o Web Interface

Connect your device to the extender's Wi-Fi network or via an Ethernet cable. Open a web browser and enter the default IP address (e.g., 192.168.11.1) or domain name (e.g., waplogin.link) into the address bar. Log in using the administrator credentials you set during initial setup.

6.2 Configurações principais

• Configurações sem fio: Configure SSID, encryption method (WPA2-PSK recommended), and password for both 2.4 GHz and 5 GHz bands. Enable Multi-Link Operation (MLO) for optimal WiFi 7 performance.
• Wi-Fi para visitantes: Create a separate Wi-Fi network for guests, providing secure access without compromising your main network.
• Signal Adjustment: Adjust the transmit power of the antennas (High, Medium, Low) to optimize coverage and minimize interference.
• Atualização de Firmware: Verifique e instale regularmente as atualizações de firmware para garantir o melhor desempenho e segurança.

7. Especificações

8. Operating the WAVLINK WiFi 7 BE5100

Once configured, the WAVLINK BE5100 operates autonomously based on the selected mode. Ensure the device has a stable power supply and a clear line of sight to the areas requiring Wi-Fi coverage for optimal performance.

9. Manutenção

Regular maintenance helps ensure the longevity and optimal performance of your outdoor extender.

• Limpeza: Periodically clean the exterior of the device to remove dust, dirt, or debris. Use a soft, damp pano. Não use produtos químicos agressivos ou produtos de limpeza abrasivos.
• Atualizações de firmware: Verifique o web interface regularly for available firmware updates and install them to benefit from performance improvements and security patches.
• Inspeção de cabos: Periodically inspect the Ethernet cable and power connections for any signs of wear or damage. Ensure waterproof seals are intact.

10. Solução De Problemas

If you encounter issues with your WAVLINK BE5100, try the following steps:

• Sem energia: Ensure the PoE adapter is correctly connected to a power source and the extender. Check all cable connections.
• Sem acesso à Internet: Verify that your main router/modem has an active internet connection. Check the Ethernet cable connection between the PoE adapter and your network source.
• Sinal fraco/Desempenho ruim: Adjust the extender's position for better line of sight. Ensure antennas are securely attached. Check for physical obstructions. Adjust signal adjustment settings in the web interface to 'High'.
• Não é possível acessar Web Interface: Ensure your device is connected to the extender's Wi-Fi or via Ethernet. Try restarting the extender. Verify the correct IP address or domain name.
• Restauração de fábrica: If problems persist, perform a factory reset by pressing and holding the reset button for approximately 10 seconds until the indicator lights change. Note: This will erase all custom settings.

11. Garantia e suporte

WAVLINK products come with a manufacturer's warranty. For technical support, warranty claims, or further assistance, please contact WAVLINK customer service:

• Suporte por telefone: +1 888 973 0883 (UTC-5) Mon - Fri 9 AM - 6 PM
• Suporte por e-mail: Contacte@wavlink.com
• Life-long technical support is provided.