VIVURN 028-remote

VIVURN 028 Leg Exerciser Replacement RF Remote Control User Manual

Model: 028-remote

1. Introdução

This manual provides essential instructions for the proper use, setup, and maintenance of your VIVURN 028 Leg Exerciser Replacement RF Remote Control. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.

2. Compatibilidade

This replacement remote control is specifically designed for the VIVURN 028 White under desk elliptical. It is compatible with units ordered after October 1, 2025. This remote is não compatible with the VIVURN 018 mini elliptical or other brands of leg exercisers.

To confirm compatibility, press any button on the remote. The light in front of the remote should turn blue. Ensure your original remote exhibited this behavior.

VIVURN 028 Replacement Remote Control with various elliptical models, indicating compatibility with the white model.

Image: The VIVURN 028 replacement remote shown next to several elliptical models, highlighting its specific compatibility with the white VIVURN 028 model.

3. Conteúdo da embalagem

  • One (1) VIVURN 028 Replacement RF Remote Control

4. Configuração

4.1 Instalação da bateria

  1. Localize o compartimento da bateria na parte traseira do controle remoto.
  2. Deslize a tampa da bateria para baixo para abri-la.
  3. Insert two (2) AAA batteries (not included) into the compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Deslize a tampa da bateria de volta no lugar até que ela se encaixe com segurança.
Back of the VIVURN 028 remote control with the battery cover removed, showing two AAA batteries inserted.

Imagem: A parte traseira view of the remote control with the battery cover open, illustrating the correct placement of two AAA batteries.

Observação: This remote utilizes Radio Frequency (RF) technology, offering more responsive control without needing to point directly at the elliptical.

5. Instruções de operação

Familiarize yourself with the buttons on your VIVURN 028 replacement remote control:

Diagram of the VIVURN 028 remote control with each button labeled for its function.

Image: A clear diagram of the remote control, indicating the function of each button.

  • POTÊNCIA (Botão Vermelho): Press to turn the elliptical exerciser On or Off.
  • INICIAR / PARAR: Press to start or stop the exercise program. Can also be used to reset certain functions.
  • MODO: Cycles through different program modes (P1, P2, P3) or the Heart Rate (HR) mode.
  • DIREÇÃO: In HR mode, press to switch the pedaling direction (forward or reverse).
  • FUNÇÃO: Press to switch the data displayed on the elliptical's screen (e.g., time, distance, calories).
  • SPEED ▲ (Up Arrow): In HR mode, press to increase the speed or resistance level.
  • SPEED ▼ (Down Arrow): In HR mode, press to decrease the speed or resistance level.

6. Manutenção

6.1 Substituição da bateria

When the remote control's responsiveness decreases or the blue indicator light no longer illuminates, it is time to replace the batteries. Follow the battery installation steps in Section 4.1.

  • Always use two new AAA batteries.
  • Não misture pilhas velhas e novas, ou tipos diferentes de pilhas.
  • Remova as pilhas se o controle remoto não for usado por um longo período para evitar vazamento.

7. Solução De Problemas

ProblemaPossível causaSolução
Remote not responding to elliptical.Baterias descarregadas ou instaladas incorretamente.Substitua as pilhas por pilhas AAA novas, certificando-se da polaridade correta.
Remote light does not turn blue when buttons are pressed.Low battery power or remote malfunction.Replace batteries. If issue persists, contact VIVURN customer support.
O funcionamento remoto é intermitente.Baterias fracas ou interferência.Replace batteries. Ensure no strong electronic devices are causing interference nearby.
Remote does not control other elliptical models.Incompatible model.This remote is only compatible with the VIVURN 028 White under desk elliptical (ordered after Oct 1, 2025).

8. Especificações

  • Nome do modelo: 028-remote
  • Marca: VIVURN
  • Peso do item: 1.28 onças
  • Dimensões da embalagem: 6.3 x 5.7 x 0.75 polegadas
  • Fonte de energia: 2 x pilhas AAA (não incluídas)
  • Conectividade: Radiofrequência (RF)

9. Garantia e Suporte

For warranty information or technical support, please refer to the documentation provided with your VIVURN 028 Leg Exerciser or visit the official VIVURN website. Guarde o recibo de compra para reclamações de garantia.

Documentos relacionados - 028-remote

Préview VIVURN Elliptical Trainer User Manual - Model 019
Comprehensive user manual for the VIVURN Elliptical Trainer, Model 019. Includes safety instructions, operating modes, product care, and troubleshooting tips for home exercise.
Préview Manual do Usuário e Instruções de Operação do Aparelho Elíptico Motorizado
Comprehensive user manual for the VIVURN Motorized Elliptical Trainer. It includes essential safety guidelines, a detailed parts list, step-by-step installation procedures, operating instructions for both the console and remote control, and product maintenance tips, including troubleshooting common issues.
Préview Manual do Usuário do Aparelho Elíptico Motorizado Vivirn
Manual do usuário do aparelho elíptico motorizado Vivirn, incluindo instruções de segurança, conteúdo da embalagem, instalação, instruções de operação, funções dos botões, modos predefinidos e manutenção.
Préview Manual do Usuário do Aparelho Elíptico ANCHEER para Uso Sob a Mesa
Manual do usuário do elíptico ANCHEER para uso embaixo da mesa, detalhando a configuração, os modos de operação, as funções do controle remoto e a manutenção. Inclui precauções de segurança e certificação da FCC.
Préview Manual do Usuário do Aparelho Elíptico ANCHEER para Uso Sob a Mesa - Guia de Operação, Segurança e Manutenção
Manual do usuário completo para o aparelho elíptico ANCHEER para uso sob a mesa. Inclui procedimentos de operação, precauções de segurança, dicas de manutenção e detalhes da certificação FCC para uso ideal.