WAVLINK AC1200 Outdoor WiFi Extender (WN572HP3) Instruction Manual

1. Produto acabadoview

The WAVLINK AC1200 Outdoor WiFi Extender is a high-power, dual-band wireless access point designed for extending Wi-Fi coverage in outdoor environments. It features a weatherproof and heat-resistant housing, making it suitable for various weather conditions. This device supports multiple operation modes including Mesh Extender, Access Point (AP), and Repeater, offering flexible deployment options for enhanced network connectivity.

Image: WAVLINK AC1200 Outdoor WiFi Extender, showcasing its design and antennas.

2. Conteúdo da embalagem

Verifique se todos os itens estão presentes na embalagem:

• 1x AC1200 Dual Band Outdoor WiFi Range Extender
• 2x 2.4GHz Omni Antennas
• 2x 5GHz Omni Antennas
• 1 cabo de rede RJ45
• 1x Adaptador de energia
• 1x Conversor PoE
• 1x kit de montagem
• 1x Guia de Iniciação Rápida

Image: All components included in the WAVLINK AC1200 Outdoor WiFi Extender package.

3. Principais características

• Projeto à prova de intempéries: Engineered with an IP65-rated, weatherproof, and heat-resistant housing, ensuring reliable operation in temperatures from -30°C to 70°C (-22°F to 158°F). It provides protection against 15KV ESD and 4KV lightning strikes. Note: The PoE port is not waterproof.

  Image: Visual representation of the extender's weatherproof capabilities.
• Cobertura Wi-Fi ampliada: Equipped with dual high-gain 7dBi antennas and 800mW high-power amplifiers to significantly expand Wi-Fi signal, eliminate dead zones, and enhance penetration through obstacles. Advanced anti-interference technology helps avoid channel conflicts.
• High-Speed Dual-Band Wi-Fi: Supports dual-band speeds up to 867Mbps (5GHz) and 300Mbps (2.4GHz) for seamless streaming and browsing. Powered by the MT7621A chip and supporting Easy Mesh technology, it can integrate with other Wavlink devices and support 64–96 connected devices simultaneously.

  Image: Diagram illustrating the dual-band AC1200 speeds.

• Flexible Installation with PoE & Multi-Mode: Offers multiple operation modes including Mesh Extender, AP, and Repeater. Integrated PoE support simplifies installation by using a single cable for both power and data. Two Gigabit Ethernet ports provide faster speeds than standard Ethernet ports.

4. Componentes de Hardware

The device features ports for LAN/WAN connections and antenna connectors. The bottom panel includes:

• Porta LAN: For local area network connection.
• WAN/LAN Backhaul Port (PoE IN): Supports Power over Ethernet for both power and data transmission.
• GND: Grounding terminal for lightning protection.
• Botão de reinicialização: Used to reset the device (Pair 2S, Reset 6S).

Antenna connectors are clearly marked for 2.4GHz and 5GHz bands.

5. Instalação da antena

Para instalar as antenas:

1. Identify the 2.4GHz and 5GHz antennas. They are marked accordingly.
2. Align each antenna with its corresponding port on the device.
3. Gently push the antenna into the port and twist clockwise until secure. Ensure the rubber washers are properly seated for waterproofing.
4. Adjust the antenna direction for optimal signal reception and transmission.

6. Power Over Ethernet (PoE) Connection

The device utilizes Power over Ethernet (PoE) for simplified installation, requiring only one Ethernet cable for both power and data.

1. Connect one end of the RJ45 Ethernet cable to the WAN/LAN Backhaul (PoE IN) port on the extender.
2. Thread the Ethernet cable through the provided waterproof gland and rubber seal, then connect it to the 'PoE' port on the PoE converter.
3. Connect the power adapter to the DC IN port on the PoE converter.
4. Conecte o adaptador de alimentação a uma tomada elétrica padrão.
5. Connect another Ethernet cable from the 'LAN Data In' port on the PoE converter to your router or network switch.

Image: Illustration of the PoE setup, connecting the extender to power and network via a single Ethernet cable.

7. Modos de operação

The WAVLINK AC1200 Extender supports several operating modes:

• Modo Repetidor: Extends existing Wi-Fi coverage by receiving a signal from your main router and re-transmitting it.
• Modo de ponto de acesso (AP): Connects to a wired network and broadcasts a new Wi-Fi signal, converting a wired connection into a wireless one.
• Modo roteador: Funciona como um roteador principal, fornecendo acesso à internet para dispositivos conectados.
• Modo extensor de malha: Integrates with other compatible Wavlink Mesh devices to create a seamless, unified Wi-Fi network. Note: This 572HP3 model supports functioning as a mesh extender, not a mesh controller.

Image: Visual guide to the different operational modes of the extender.

Image: Depiction of Mesh Technology providing stable roaming.

8. Montagem e Colocação

The extender comes with a mounting kit for flexible installation. Consider the following for optimal performance:

• Choose a location that provides a clear line of sight to your main router (for Repeater/Mesh modes) or to the area requiring coverage.
• Mount the device vertically to allow for proper water drainage.
• Ensure the PoE converter is installed indoors or in a weatherproof enclosure, as it is not waterproof.
• Use the provided mounting kit to securely attach the extender to a pole or wall.

Imagem: Examples of mounting the extender for flexible installation.

9. Desempenho e Cobertura

The high-power amplifiers and 7dBi omnidirectional antennas are designed to provide extensive outdoor Wi-Fi coverage. Performance may vary based on environmental factors such as obstacles, interference, and distance from the main router.

Image: Depiction of the extender providing broad outdoor Wi-Fi coverage.

10. Especificações técnicas

11. Solução De Problemas

• Sem energia: Ensure the PoE converter is properly connected to the power adapter and a working electrical outlet. Check the Ethernet cable connection to the extender's PoE IN port.
• Sem conexão com a Internet: Verify that your main router has an active internet connection. Check all Ethernet cable connections. If in Repeater mode, ensure the extender is receiving a strong signal from the main router.
• Sinal fraco: Adjust antenna positions. Relocate the extender to a position with fewer physical obstructions between it and the main router or the area needing coverage.
• Não é possível acessar a página de configuração: Ensure your device is connected to the extender's Wi-Fi network or via an Ethernet cable. Try resetting the extender to factory defaults by pressing the reset button for 6 seconds.

12. Garantia e Suporte

The WAVLINK AC1200 Outdoor WiFi Extender is backed by a 12-month warranty and lifetime technical support. For any questions or assistance, please contact WAVLINK support:

• Suporte por telefone: +1 8889730883 (UTC-5) Mon-Fri 7AM-4PM
• Suporte por e-mail: Contacte@wavlink.com
• Alternatively, contact us via Amazon.

WAVLINK aims to provide solutions within 24 hours.