1. Introdução
The VQVRTPIA SMJAC03 is a Schumann Resonance Pulse Sine Wave Generator designed to produce electromagnetic waves within a specific frequency range. This device is capable of generating both sine and pulse waveforms, with a primary focus on the Schumann Resonance frequency of 7.83Hz. It features a wide adjustable frequency range from 0.01Hz to 100KHz and includes a memory function to save the last set frequency upon power off. This manual provides essential information for the proper setup, operation, and maintenance of your SMJAC03 generator.
2. Produto acabadoview
The SMJAC03 generator features a compact design with an acrylic shell, an LCD display, and a keypad for frequency adjustment. Key components include:
- Schumann Wave Signal Transmitting Antenna: The primary component for emitting the generated waves.
- Tela LCD: Shows the current frequency and operational status.
- Teclado: Used for inputting and adjusting the desired frequency.
- DC 5V Power Interface: Para conectar a fonte de alimentação.
- 3.5MM Audio Output Port: Provides an audio signal output of the generated waveform.
Figura 2.1: Frente view of the VQVRTPIA SMJAC03 Schumann Resonance Generator, showing the circular antenna, LCD display, and keypad.
Figura 2.2: Lado view of the VQVRTPIA SMJAC03, highlighting the acrylic shell and compact form factor.
Figura 2.3: Illustrative diagram showing typical component locations on a similar Schumann Resonance Generator. This image is for general reference; actual component layout on the SMJAC03 may vary slightly but includes a large antenna, LCD display, keypad, DC 5V power interface, and 3.5mm audio output port.
3. Configuração
- Conexão de energia: Connect a DC 5V power adapter (not included) to the DC 5V power interface on the side of the generator. Ensure the power source provides stable 5V DC.
- Inicialização: Once power is connected, the device will automatically power on, and the LCD display will illuminate, showing the current frequency.
- Saída de áudio (opcional): If you wish to monitor the waveform via an audio device, connect a 3.5mm audio cable (not included) from the 3.5MM audio output port to your desired audio input device.
4. Instruções de operação
The SMJAC03 allows for easy adjustment of the output frequency using its integrated keypad.
- Ligar: The device powers on automatically when connected to a DC 5V power source. The LCD will display the last saved frequency.
- Ajuste de frequência:
- Use the numeric keys on the keypad to input your desired frequency. The frequency range is 0.01Hz to 100KHz.
- To input decimal values, use the '.' (dot) key.
- After entering the numerical value, press the 'OK' or 'SET' key (depending on the specific keypad layout) to confirm and apply the new frequency.
- Exampem: To set the frequency to 7.83Hz, press '7', then '.', then '8', then '3', and finally 'OK' or 'SET'.
- Frequency Memory: The SMJAC03 features a power-off memory function. The last set frequency will be automatically saved and recalled when the device is powered on again.
- Output Waveforms: The generator produces both sine and pulse waveforms. The primary frequency displayed on the LCD corresponds to the output frequency of these waveforms.
5. Especificações
- Modelo: SMJAC03
- Marca: VQVRTPIA
- Faixa de frequência: 0.01Hz - 100KHz
- Schumann Resonance Frequency: 7.83Hz (default/key feature)
- Output Waveforms: Sine Wave, Pulse Wave
- Fonte de energia: Corrente contínua 5 V
- Saída de áudio: Conector de 3.5 mm
- Frequency Memory: Yes (frequency saved when power off)
- Material da concha: Acrílico
6. Manutenção
To ensure the longevity and optimal performance of your SMJAC03 generator, follow these maintenance guidelines:
- Limpeza: Use a soft, dry cloth to clean the exterior of the device. Avoid using abrasive cleaners or solvents, which can damage the acrylic shell and electronic components.
- Armazenar: Guarde o dispositivo em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
- Manuseio: Manuseie o dispositivo com cuidado para evitar danos físicos. Evite deixá-lo cair ou submetê-lo a impactos fortes.
- Fonte de energia: Always use a stable DC 5V power supply. Disconnect power when the device is not in use for extended periods.
7. Solução De Problemas
If you encounter issues with your SMJAC03 generator, refer to the following common troubleshooting steps:
- No Power/LCD Not Lighting Up:
- Ensure the DC 5V power adapter is correctly connected and functioning.
- Verifique se a tomada está funcionando.
- Try a different compatible DC 5V power adapter.
- Incorrect Frequency Display/Output:
- Re-enter the desired frequency using the keypad and ensure you press 'OK' or 'SET' to confirm.
- Check that the input frequency is within the 0.01Hz to 100KHz range.
- Sem saída de áudio:
- Ensure the 3.5mm audio cable is securely connected to both the generator and the audio input device.
- Verify the audio input device is powered on and set to the correct input source.
- Test with a different audio cable or audio input device.
8. Informações de segurança
Please read and adhere to the following safety precautions:
- Não exponha o dispositivo à água ou umidade excessiva.
- Não abra o dispositivo casing or attempt repairs yourself. Refer to qualified personnel for service.
- Use only the specified DC 5V power supply. Using an incorrect voltage pode danificar o dispositivo.
- Keep the device away from strong magnetic fields or other electronic interference sources.
- This device is not a medical instrument and should not be used for diagnostic or treatment purposes.
9. Garantia e Suporte
Specific warranty information for the VQVRTPIA SMJAC03 is not provided in this manual. For warranty details, technical support, or service inquiries, please refer to the product packaging, the retailer from whom you purchased the device, or contact VQVRTPIA customer support directly through their official channels.