Introdução
The SmallRig AP255Pro is a compact and portable carbon fiber travel tripod designed for photographers and videographers. It features a 5-section leg design and a fluid head, offering stability and versatility for various shooting scenarios.
Key features include a bowl base for quick leveling, a 180-degree reversible center column for low-angle and macro shots, and a fluid head with a 3kg (6.6lb) maximum load capacity, supporting 360-degree rotation, 90-degree overhead shooting, and 65-degree upward shooting.
The tripod legs are compatible with various heads and stabilizers via 3/8''-16 threaded holes, supporting an 8kg (17lb) maximum payload. The tripod head accommodates mirrorless cameras, camera cages, and phones using 1/4''-20 threaded holes and the included phone clamp.
O que está na caixa
Verifique se todos os componentes estão presentes ao desembalar:
- Compact Travel Tripod x 1
- Suporte para telefone x 1
- Bolsa de transporte x 1
Instruções de configuração
1. Extending the Tripod Legs
Unlock the leg sections by twisting the leg locks. Extend each of the 5 leg sections to the desired length. Twist the locks in the opposite direction to secure them. Ensure all leg sections are fully locked before use.
2. Adjusting the Center Column
To adjust the height of the center column, loosen the center column lock, raise or lower the column, and then tighten the lock securely. For low-angle shots, the center column can be inverted. Loosen the center column lock, remove the column, flip it upside down, and reinsert it, then secure the lock.
3. Leveling the Tripod with the Bowl Base
The tripod features a bowl base for quick leveling. After setting up the legs, use the bowl base adjustment to fine-tune the head's level without needing to adjust each leg individually. This is particularly useful on uneven terrain.
4. Conectando seu dispositivo
The fluid head includes a quick release plate. Attach this plate to your camera or camera cage using the 1/4''-20 threaded screw. For smartphones, use the provided phone holder, which also attaches to the quick release plate. Once attached, slide the quick release plate with your device into the head and secure it with the quick release plate lock.
Instruções de operação
1. Using the Fluid Head
The fluid head allows for smooth panning and tilting movements. Use the pan lock to control horizontal rotation (360 degrees) and the tilt lock to control vertical movement (90 degrees overhead, 65 degrees upward). Loosen the respective locks for movement and tighten them to secure the position.
2. Carbon Fiber Leg Design
The tripod legs are constructed from carbon fiber, providing a balance of portability and stability. The maximum leg diameter is 25.5mm (1 inch).
Manutenção
- Limpeza: Limpe o tripé com um pano macio e seco após cada utilização. Para sujidade mais persistente, utilize um pano ligeiramente seco.amp Use um pano umedecido com sabão neutro e seque bem. Evite produtos químicos agressivos.
- Lubrificação: Periodically check leg locks and moving parts for smooth operation. Do not over-lubricate; use a small amount of silicone-based lubricant if necessary.
- Armazenar: Store the tripod in its carrying bag in a dry, cool place away from direct sunlight and extreme temperatures.
- Inspeção: Regularly inspect all screws, bolts, and connections to ensure they are tight. Do not overtighten.
Solução de problemas
- O tripé está instável: Ensure all leg locks are fully tightened and the center column lock is secure. Check that the tripod is placed on a flat, stable surface.
- Leg sections are stiff: Clean the leg sections and locks to remove any dirt or debris. A small amount of silicone lubricant can be applied to the moving parts if needed.
- Fluid head movement is not smooth: Ensure the pan and tilt locks are sufficiently loosened. Check for any obstructions or debris in the fluid head mechanism.
- Camera not securely mounted: Verify that the quick release plate is correctly attached to your camera and fully seated in the fluid head, with the quick release plate lock engaged.
Especificações
| Recurso | Detalhe |
|---|---|
| Dimensões do produto | 3.46 x 3.15 x 20.47 polegadas (88.0 x 79.0 x 520.0 mm) |
| Peso do item | 3.3 libras (1.5 kg) |
| Número do modelo do item | 13649 |
| Marca | SMALLRIG |
| Cor | Preto |
| Material | Aluminum, Carbon Fiber, ABS |
| Altura Máxima | 160 centímetros (63 polegadas) |
| Tipo de cabeça de tripé | cabeças de bandeja |
| Tripod Leg Max Load Capacity | 8kg (17lb) |
| Tripod Head Max Load Capacity | 3kg (6.6lb) |
| Comprimento dobrado | 52 cm (20.5 polegadas) |
| Seções de perna | 5 |
| Max Leg Diameter | 25.5 mm (1 polegadas) |
Garantia e Suporte
For warranty information and technical support, please refer to the official SmallRig webou entre em contato diretamente com o serviço de atendimento ao cliente. Guarde o comprovante de compra como prova para eventuais solicitações de garantia.
You can typically find support contact details and warranty terms on the manufacturer's product page or in the documentation included with your purchase.