INSTRUÇÕES DE USO
Programador de Endereço de Terminal
| PRG.PAS.MCS |
| 170 x 112 x 35 mm / 270 g |
| Plastic case + mechanical keyboard 0°C … 45°C – IP 31 |
| Fonte de alimentação: 9V (bateria/bateria recarregável) |
| Conexão ao terminal via cabo UTP Patch Cable 0.25 cm |
| Endereços disponíveis para programação: entre “000” e “998” Digitar “999” encerra a programação do endereço. |
DESCRIÇÃO
O PRG.PAS.MCS programmer allows the programming of the address (apartment number) for all types of terminals in the Linha Clássica range: PAS.17A, PAS.27X, PAS.37X, MCS.47X.
This programmer serves as the mobile alternative to the terminal address programming function, enabling the address to be programmed both on-site and in the office, by a single person.
CONEXÃO AO TERMINAL
- Cabo Patch UTP 0.25 cm
- Voltar
- Frente
- Programador PRG.PAS.MCS
- Terminal de vídeo – áudio (MCS.47X, PAS.27X, PAS.37X)
LIGADO/DESLIGADO
- The programmer is turned on by pressing the ON key.
- The programmer turns off:
– 3 seconds after entering the last digit of the programmed address;
– 10 seconds after being turned on, if no key is pressed.
PROGRAMAÇÃO
Etapa 1: Connect the programmer to the terminal.
Etapa 2: Pressione o ON key on the programmer → The display shows [Postagem de endereço].
Etapa 3: On the terminal, press and hold the 
chave.
Etapa 4: On the programmer, enter the terminal address to be programmed (3 digits required). After entering the last digit, the terminal will issue a confirmation beep, and the key can be released.
07.2025 INS.PRG.PAS.MCS
FEITO na UE por:
ELECTRA srl
Parque Industrial Miroslava
Rua Principala 33, 707307, Jud. Iaşi – RO
+40 232 214.370
sales@electra.ro
www.electra.ro
APOIAR
ELECTRA Building Communications GmbH
Gadnergasse 71, Stockwerk 1, Buro Top 132
1110 Wien – AT
+43 1 810 20 99
sales@electra-automation.at
www.electra-automation.at
Documentos / Recursos
 |
Programador de endereço de terminal Electra PAS.17A [pdf] Manual de Instruções PAS.17A, PAS.27X, PAS.37X, MCS.47X, PAS.17A Programador de endereço de terminal, PAS.17A, Programador de endereço de terminal, Programador de endereço, Programador |