MULTIBRACKETS 5605 Wall Bracket

Especificação

• Produto: MULTIBRACKETS 5605 Universal Wall Bracket / Long Reach Arm Mount
• Tipo: Full-motion articulating TV wall mount (dual arm long-reach swivel)
• Cor: Acabamento em metal preto
• Material: Heavy-duty solid steel construction
• Screen Compatibility: Fits most flat-panel TVs 65″ – 110″ diagonal
• Max screen diagonal: ~279 cm (110″)
• Capacidade de peso: Up to 125 kg (~275 lbs) load support
• Suporte VESA: Compatible with most VESA patterns from 100×100 mm up to 800×600 mm
• Movement & Adjustment: Full-motion swivel, tilt, and rotate at multiple pivot points
• Faixa de inclinação: approx. -5° to +10°
• Swivel/rotation: approximately 60° to +60°
• Extension from wall: up to 980 mm (~38.6″)
• Características:
  • Dual long-reach arms for flexible viewposições
  • Smart cable management system to hide cables
  • Partially pre-assembled with a full hardware kit included
• Tipo de instalação: Wall mount, articulating bracket
• Cor: Preto

IMPORTANTE!
Your Plasma. LCD. TV, Projector, Projector Screen, or other HiFi equipment represents a considerable value.
If screws are Included they may not be suitable for the material of your wall, ceiling, or floor. Replace the screws with suitable ones if needed.
In case you are unsure regarding any aspects or the mounting of this product,t please
Consulte um profissional.

Aviso!
Sempre verificar o profundidade of o buracos antes começando an instalação.

Fits most 65″-110″ flat panel TV

• Weight capacity: 125kg/275 lbs
• VESA compliance: 100×100 200×200 300×300 400×200 400×400 600×400 800×600

AVISO 
Lesões pessoais graves e danos materiais podem resultar de instalação ou montagem inadequada. Leia o seguinte aviso cuidadosamente antes de começar.

• Os produtos devem ser instalados por profissionais.
• Se você não entender as instruções ou tiver alguma dúvida ou preocupação, entre em contato com um instalador local qualificado.
• Não instale ou monte se o produto ou hardware estiver danificado ou faltando. Se precisar de peças de reposição, entre em contato com seu distribuidor local para obter assistência.
• This product fits most65″-11D”LCD and plasma screens; maximum weight of LCD /plasma screen: 125kg.
• This product has been designed for use on masonry (solid concrete, 2000 PSI density minimum).
• For safe installation. The wall you are mounting to must support a minimum of 3 times the weight of the total load (the mount, the TV, and all accessories).
• Não use este produto para qualquer outra aplicação que não seja a originalmente projetada.
• This product contains moving parts; please use it with caution.
• When installing a flat panel display, please do not damage the electrical wiring or the power source.
• O fabricante não assume nenhuma responsabilidade pela montagem na parede vertical, ou danos acidentais ou consequenciais daí resultantes.
• O fabricante se isenta de qualquer responsabilidade pelas modificações, instalação inadequada ou instalação acima da faixa de peso especificada.
• The manufacturer will not be liable for any damages arising out of the use of, or inabilityto use, the product.

Lista anterior

INSTALAÇÃO

INSTALLATION OPTION 1: Wood Stud Installation (Suitable for 16″ or 24″ apart studs)

1. Use a stud finder to locate the drywall studs and mark the desired installation locations with a pencil.
2. Fixe o modelo de placa de parede (BB) na parede no local de instalação desejado.
3. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall. Attempt to locate the lag bolt locations in the middle of the studs.
4. Use a 7/32″ (5.5mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm).

Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Secure the Wall Plate to the wall with 6 x Lag Bolts ( H) and 6 x Washers (H).

OBSERVAÇÃO: Do not use Wall Anchor (I) for wood stud installation.

OPÇÃO DE INSTALAÇÃO 2: Instalação de parede de concreto/tijolo

1. Fixe o modelo de placa de parede (BB) na parede no local de instalação desejado.
2. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall.
3. Use a 3/8″ (10 mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm). Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Insira 6 buchas de parede (I) nos orifícios. Prenda a placa de parede na parede com 6 x parafusos de retenção (H) e 6 x arruelas (H).

This full motion TV wall mount comes with a sliding mechanism that allows the arms and the TV to slide horizontally left or right for up to 15. 7 inches, while the wall plate is stationary on the wall. This feature allows the TV to be placed at an optimal position, regardless of the position of the wall studs. The mount will ship with the locking bars installed in place at their center position. If the sliding function will be used, take off the locking plates by removing the bolts that hold them in place.

Place the top locking bar at the desired position to fix the left slide limit of the arms, and place the bottom bar at the desired position to fix the right side limit of the arms. The raised metal piece at the end of the locking bars limits the slide of the arms. Ensure the locking bars are oriented correctly to ensure both the left and right side locking bars correctly limit the slide. Ensure both of the bolts are tightened at each locking bar’s position to prevent the arms from sliding off the wall plate.

AVISO: FAILURE TO INSTALL THE LOCKING BARS ADEQUATELY MAY RESULT IN THE ARMS AND THE TV FROM SLIDING OFF THE WALL PLATE.

Attaching the TV to the Mount (For Displays With Smaller Bolt Hole Patterns)
For TVs with smaller bolt hole patterns of VESA 100×100, 100×200, 200×100, and 200x200mm, the TV can be mounted directly on the plate, without the extension bars.

Fixação da TV ao suporte (para monitores com padrões de furos maiores) Para TVs com padrões de furos maiores de VESA 300×300,400×200,400×400,600×400, 800×600 mm, use os suportes de TV e as barras de extensão para instalar o TV ao monte.

Attach the 2 x TV Brackets to the back of the TV by using screws A+E, B+E, C+E, or Dor G.

OBSERVAÇÃO: The hardware packet provided fits most TVs in the market. If your TV requires different hardware, please contact us at mount-it. com to procure additional hardware kits.

Ensure the screws are adequately engaged with the screw holes on the TV.
Do not overtighten the screws. Ensure the TV brackets sit flat with the back of the T.V.

Hangina g TV On The Wall Mount Arms

Lift the TV (two persons recommended) and hang the TV brackets onto the wall mount extension bars.

Prendendo a TV no suporte

Secure the TV brackets on the mount by attaching the 4 x AA Safety Brackets with 4 x F Screws as shown ointhe image.

OBSERVAÇÃO: Deixar de prender os suportes da TV ao suporte com os suportes de segurança AA pode resultar na retirada acidental da TV das barras de extensão, possivelmente resultando em danos corporais ou materiais.

Ajuste de nivelamento -5° – +5°
The mount allows up to 5 degrees of leveling adjustment post installation. To adjust the level of the TV, place a bubble level on top of the TV, loosen the 2 x G bolts located behind the VESA plate, level the TV, and tighten the 2 x G bolts to lock the TV in position.

Ajuste de inclinação -5° – +10°

The mount can tilt down up to 10 degrees and up 5 degrees. To adjust the tilt angle of the TV, pull out the tilt adjustment levers on both sides of the mount and turn counterclockwise to loosen the screws. Adjust the tilt to the desired angle and turn the tilt adjustment lever clockwise to tighten the screws.

OBSERVAÇÃO: IF THE TV TILTS DOWN AFTER A PERIOD OF USE, CHECK THE TILT ADJUSTMENT LEVER TIGHTNESS AND TIGHTEN IF NECESSARY.

Use os clipes de gerenciamento de cabos integrados nos braços para direcionar os cabos para a parte traseira ou lateral da TV.

Dimensão

CARTÃO DE GARANTIA

MÚLTIPLOS SUPORTES “™ Limitado Garantia

Multicolchetes mandados isso é produtos para be livre of defeitos in material e acabamento para o produtos Garantia Período.

O Garantia período começa on o original comprar data of o produto

Todos Multicolchetes produtos são abordado by a limitado produto garantia

• CINCO (5) anos para metal vídeo monitor mounts, todos prateleirase non-electrical prateleira acessórios
• DOIS (2) anos para gaslifts e sit-stand estações de trabalho
• UM (1) ano para todos motorizado e/ou automatizado produtos, plástico palestrante mounts, todos palestrante stands, todos mobília, todosmadeira (MDF) acessórios

Para garantia reivindicações feito durante o Garantia Período, MULTISUPORTES vai substituir qualquer defeituoso produto papel livre of charge. Should a papel on seu Multicolchetes produto fail, por favor criar anRMA caso on www.multibrackets.com/support para fazer a garantiaalegar. We vai aguardar seu documentação e então discuss oproblema com você, e uma vez we confirm o produto is sob guerraranty, we vai enviar substituição partes para você. Esse Limitado Garantiafaz não cobrir o custos of removendo e substituindo defeituoso partesde seu Multicolchetes produto. Então, if seu problema requer areparar technician, você deve pagar qualquer trabalho encargos.

For warranty claims made during the Warranty Period, MULTI BRACKETS will replace any defective product part free of charge. Should a part of your Multibrackets product fail, please create an RMA case on www.multibrackets.com/support to make a warranty claim. We will await your documentation and then discuss the problem with you, and once we confirm the product is under warranty, we will ship replacement parts to you. This

Limited Warranty does not cover the costs of removing and replacing defective parts from your Multibrackets product. So, if your problem requires arepair technician, you must pay any labor charg.es This Limited Warranty extends only to the original purchaser of the product and is automatically void if your Multibrackets product is modified in any way, improperly installed, taxed beyond its stated weight capacity, or otherwise misused or abused.

All Multibrackets products are intended for indoor use only, and any outdoor use voids this Limited Warranty. The Limited Warranty for wall and ceiling mounts is void if the mount is moved from its initial installation. To the maximum extent permitted by applicable law, Multibrackets disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Multibrackets will not be liable for any damages whatsoever arising out of the use or inability to use itsproducts, even if Multibrackets has been advised of the possibility of such damages. To the maximum extent permitted by applicablelaw, Multibrackets disclaims any responsibility for incidental or consequential damages,

Multibrackets M Stockholm, Sweden 2016. www.multibrackets. com

The content of this manual is subject to Change wltheut further notice. The latest vers, on of this manual can be found online under the product name on the website: www.multibrackets.com

 

Documentos / Recursos

MULTIBRACKETS 5605 Wall Bracket [pdf] Guia de instalação 5605 Wall Bracket, 5605, Wall Bracket, Wall Bracket, Wall, Bracket

Referências

• Manual do usuário