SmallRig 3902B Wireless Remote Controller User Manual

SmallRig 3902B Wireless Remote Controller User Manual

Logotipo SmallRig

SmallRig 3902B Wireless Remote Controller

SmallRig-3902B-Wireless-Remote-Controller-product

Especificações

Vol operacionaltage 3.0V
Corrente de trabalho ≤ 5mA
Tipo de Bateria Célula de botão CR2032
Parâmetros da bateria 3.0 V 220 mAh 0.72 Wh
Distância de controle Aprox. 10m
Temperatura de operação -10°C ~ 45°C
Dimensões do produto 53.2 x 32.4 x 22.5 mm (2.1 x 1.27 x 0.88 pol.)
Peso líquido 18.0 ± 5.0g (0.63 ± 0.17oz)
Material (s) ABS + PC

Avisos

  • Do not dismantle it at random, as it contains electronic components, and do not drop or crash it.
  • Mantenha fora do alcance das crianças.
  • Please avoid high temperatures and high humidity when storing or using this product.
  • If you need any clarification, please contact the platform for after-sales services.
  • Por favor, não desmonte o produto. Se você tiver alguma dúvida, entre em contato com o vendedor para solicitar o serviço pós-venda.

Na caixa

  • Controle Remoto × 1
  • CR2032 Battery × 2
  • 1/4”-20 Parafuso × 1
  • Chave Allen × 1
  • Manual do usuário × 2

Compatibilidade

  • Sony: Alpha 7R V / Alpha 7R IV / Alpha 7R III / Alpha 7 IV / Alpha 7 III /
  • Alfa: 7S III / Alpha 7C II / Alpha 7C / Alpha 7CR / Alpha 9 II / Alpha 9 /
  • Alfa: A1 / FX3 / FX30 / Alpha 6700 / Alpha 6600 / Alpha 6100 /
  • Alfa: 6400 / ZV-E1 / ZV-E10 / ZV-1 II / ZV-1 / ZV-1F / DSC-RX100M7
  • Cânone: EOS R5 / R6 Mark II / R6 / R7 / R8 / R10 / R / RP / R50 / M6 Mark II / M50 / 90D
  • Nikon: Z 50 / Z fc / Z 30

Produto acimaview

SmallRig-3902B-Wireless-Remote-Controller-fig (1)

  1. Furo roscado 1/41-20
  2. Indicador de status
  3. Shutter (half-press for autofocus) /Record Button
  4. Interruptor de modo
  5. Compartimento da bateria
  6. Interruptor de energia
  7. Clipe com suporte para sapata fria

Preparação antes do uso

  1. Passo 1: Pressione a posição conforme mostrado para remover o compartimento da bateria.SmallRig-3902B-Wireless-Remote-Controller-fig (2) SmallRig-3902B-Wireless-Remote-Controller-fig (3)
  2. Passo 2: Install the included battery with the “+” pole facing upSmallRig-3902B-Wireless-Remote-Controller-fig (4)

Etapas de emparelhamento

Marca Sony Nikon Cânone
Compatibilidade Alpha 7R V / Alpha 7R IV / Alpha 7R III / Alpha 7 IV / Alpha 7 III / Alpha 7C II / Alpha 7CR / Alpha 7C / Alpha 7S III / Alpha 1 / Alpha 9 III / Alpha 9 II / Alpha 9 / Alpha 6700 / Alpha 6600 / Alpha 6400 / ZV-E1 / ZV-E10 / ZV-1 II / ZV-1 / ZV-1F / DSC-RX100M7 Z 50 / Z fc / Z 30 EOS R3 / R5 / R5 C / R6 / R6 II / R7 / R8 / R10 / RP / R50 / M6 Mark II / M50 / 90D
Etapas de pareamento
  1. Adjust the remote control power switch to [ON].
  2. Press and hold the shutter/record button until the indicator flashes and then goes out; confirm the mode switch adjustment to [LOCK].
  3. Adjust camera settings: a. Select MENU—[Network]—[Bluetooth Settings]—[Bluetooth Function]—[On]. b. Select MENU—[Network]—[Bluetooth Rmt Ctrl]—[On]. c. Select MENU—[Network]—[Bluetooth Settings]—[Pairing].
  4. Press and hold the remote control shutter/record button until the indicator flashes and the camera screen prompts [Allow connection from the following device: SR-RC1], then select [OK].
  5. When the camera screen displays [Paired], select [OK].

Note: Verify if the camera’s firmware [SR-RC1] is the most up-to-date one.

  1. Adjust the remote control power switch to [ON].
  2. Press and hold the shutter/record button until the indicator flashes and then goes out; confirm the mode switch adjustment to [LOCK].
  3. Adjust camera settings: a. Select MENU—[Setup Menu]—[Wireless remote connection]—[Remote control]. b. Select MENU—[Setup Menu]—[Wireless remote connection]—[Pairing].
  4. Press and hold the remote control shutter/record button until the indicator flashes and the camera screen prompts [Paired with the remote control]. Select [OK].
  5. After successful pairing, the screen prompts [Connected to the remote control].

Note: The remote control mode needs to be the same as the camera mode (STILL/MOVIE). Adjust the remote control mode switch to [STILL] (photo) or [MOVIE] (record).

  1. Adjust the remote control power switch to [ON].
  2. Press and hold the shutter/record button until the indicator flashes and then goes out; confirm the mode switch adjustment to [LOCK].
  3. Adjust camera settings: a. Select MENU—[Network settings]—[Bluetooth settings]—[Bluetooth]—[Enable]. b. Select MENU—[Network settings]—[Connect to Wireless Remote]. c. Select MENU—[Network settings]—[Connect to Wireless Remote]—[Add a device to connect].
  4. Press and hold the remote control shutter/record button until the indicator flashes and the camera screen prompts [Pairing in progress]. Start pairing on the remote control and select [OK].
  5. When the camera screen displays [Paired with SR-RC1], select [OK].

Note: The remote control mode needs to be set to the camera mode (STILL/MOVIE). Adjust the remote control mode switch to [STILL] (photo) or [MOVIE] (record).

Troubleshooting: Unable to pair or failed to pair
  1. Confirm that the remote control mode switch has been adjusted to [LOCK].
  2. Restart the control settings on the camera function, and then repeat the procedure as mentioned above.
  3. Check if the camera’s firmware is the most up-to-date one.
  1. Confirm that the remote control mode switch has been adjusted to [LOCK].
  2. If the camera is already connected to another wireless remote control, you must first delete the connection information for the previous remote control. Select MENU—[SETUP MENU]—[Wireless remote connection]—[Delete connection information]—[OK]. Follow the pairing steps to re-pair the camera.
  3. Check if the camera’s firmware is the most up-to-date one.
  1. Confirm that the remote control mode switch has been adjusted to [LOCK].
  2. If the camera is already connected to another wireless remote control, you must first delete the connection information for the previous remote control. Select MENU—[Network settings]—[Connect to Wireless Remote]—[Check/clear connection info]—[Clear connection information]—[OK]. Follow the pairing steps to re-pair the camera.
  3. Check if the camera’s firmware is the most up-to-date one.

Instruções de uso

Descrição da luz indicadora

  • Energia da bateria 20% ~ 100%: luz azul
  • Energia da bateria 10% ~ 20%: luz vermelha
  • Energia da bateria <10%: luz vermelha piscando

Montagem de controle remoto

  1. Clip with cold shoe mount installation: Through the clip with cold shoe mount, clamp the equipment with its built-in cold shoe.SmallRig-3902B-Wireless-Remote-Controller-fig (5)
  2. 1/4″-20 screw installation: After removing the clip with the cold shoe mount, fix the remote control to the built-in 1/4″-20 threaded hole device via a 1/4″-20 screw.SmallRig-3902B-Wireless-Remote-Controller-fig (6)

Instruções de segurança

Atenção

  1. Do not ingest the battery; it poses a chemical burn hazard. This product contains a button cell battery. If the button cell battery is swallowed, it can cause severe internal burns in just 2 hours and may lead to death.
  2. Mantenha pilhas novas e usadas longe das crianças.
  3. Se o compartimento da bateria não fechar com segurança, pare de usar o produto e mantenha-o longe das crianças.
  4. Se você acha que as pilhas podem ter sido engolidas ou colocadas dentro de qualquer parte do corpo, procure atendimento médico imediatamente.
  5. The remote control connection procedure may vary from camera to camera; please refer to the remote control section in the camera manual for details.
  6. The Bluetooth connection range of 100 cm / 32.8 in is an estimation, which depends on your surroundings.
  7. A remote control can only be paired with one camera. If you need to control another camera, refer to the pairing procedure to pair the remote control with the camera you need to control, and the previous camera will be unpaired automatically.
  8. After successful pairing, the camera and the remote control will connect automatically when the camera and remote control are switched on.
  9. Please turn off the power switch when not in use.

The data above comes from the SmallRig laboratory and may be subject to changing test environments.
Aplicativo SmallRig Up

  1. Baixe o APP: You can download the “SmallRig Up” app from the App Store or Apple Store.
  2. Objetivo do APP: The latest firmware for the remote controller can be downloaded and updated through the SmallRig Up app.
  3. Observação:
    1. Please ensure that the remote controller’s battery indicator light is blue and that your phone has sufficient battery before proceeding with the update.
    2. Durante o processo de atualização, não pressione nenhum botão ou interruptor no controle remoto.

Declaração da FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used according to the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be tested by turning it off and on, users should try to correct it by

  • Reoriente ou reposicione a antena receptora.
  • Aumente a separação entre o equipamento e o receptor.
  • Conecte o equipamento em uma tomada de um circuito diferente daquele ao qual o receptor está conectado.
  • Consulte o revendedor ou um técnico de rádio/TV experiente para obter assistência.

Para garantir a conformidade contínua, quaisquer alterações ou modificações não expressamente aprovadas pela parte responsável pela conformidade podem anular a autoridade do usuário para operar este equipamento. (Example: Use only shielded interface cables when connecting to a computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. Este dispositivo não pode causar interferência prejudicial e
  2. Este dispositivo deve aceitar qualquer interferência recebida, incluindo interferências que possam causar operação indesejada. Declaração de aviso de RF:

O dispositivo foi avaliado para atender aos requisitos gerais de exposição à RF. O dispositivo pode ser usado em condições de exposição portáteis sem restrição.

Declaração ISED
Este dispositivo contém transmissor(es)/receptor(es) isentos de licença que estão em conformidade com os RSS(s) isentos de licença do Innovation, Science and Economic Development Canada. A operação está sujeita às duas condições a seguir:

  1. Este dispositivo não pode causar interferência.
  2. Este dispositivo deve aceitar qualquer interferência, incluindo interferência que possa causar operação indesejada do dispositivo.

This device meets the exemption from the routine evaluation limits in section 6.3 of RSS 102, and users can obtain Canadian information on RF exposure and compliance with RSS 102.

Informações do produto

  • ID FCC: 2BC2U-3902B
  • CI: 31675-3902B
  • ID CMIIT: 25J44G013902
  • HVIN: 3902 a.C.
  • Modelo: 3902 a.C.
  • E-mail do fabricante: suporte@smallrig.com
  • Fabricante: Inovação Co. de Shenzhen Leqi, Ltd.
  • Adicionar: Salas 101, 701, 901, Edifício 4, Parque de Inovação Gonglianfuji, No. 58, Ping'an Road, Comunidade Dafu, Guanlan Street, Distrito de Longhua, Shenzhen, Guangdong, China.
  • Remetente: Shenzhen LC Co., Ltd.
  • Adicionar: Sala 201, Edifício 4, Parque de Inovação Gonglianfuji, No. 58, Ping'an Road, Comunidade Dafu, Rua Guanlan, Distrito de Longhua, Shenzhen, Guangdong, China.

Serviço Garantia

Please keep your original receipt and guarantee card. Be sure the dealer has written the date of purchase and the product’s SN on it. These are required for warranty service.

Termos da garantia pós-venda:
SmallRig products are entitled to warranty services from the date of payment.

  • Electronic products (except V-mount batteries): 1-year warranty.
  • Bateria com montagem em V: 2 anos de garantia.
  • Produtos não eletrônicos: garantia de 2 anos
  • Note: In case of any conflict between our warranty period policy and the applicable laws and regulations of the country/ region where the products are sold, the latter shall prevail.

Esta garantia não cobre:

  • Se os usuários não seguirem as “Instruções de Operação” ou quaisquer “Avisos” declarados no manual do usuário, resultando em uma falha de qualidade, isso ficará fora do escopo da cobertura da garantia.
  • A identificação do produto ou etiqueta SN for removida ou desfigurada de alguma forma.
  • Danos ao produto causados ​​por problemas não atribuíveis à qualidade dos produtos, como uso indevido dos produtos.
  • Danos ao produto causados ​​por modificação, desmontagem, reparo e outros atos não autorizados.
  • Danos ao produto causados ​​por incêndios, inundações, raios e outros fatores de força maior.

Modo de garantia:

  • For products within the scope of warranty, SmallRig will repair or replace them based on specific failures; the repaired/replaced products/ parts are entitled to the remaining part of the original warranty period.

Informações de contato:

  • É aconselhável que você entre em contato com o atendimento ao cliente on-line da plataforma de compras correspondente e envie uma solicitação de serviço de reparo.
  • Você também pode solicitar serviço de reparo através do e-mail de serviço da SmallRig. E-mail de serviço: suporte@smallrig.com

Cartão de Garantia

  • ID No. ___________
  • Item Name  ___________
  • Purchase Date  ___________
  • User Name ___________
  • Mobile ___________
  • Endereço ___________
  • Receipt ___________

Documentos / Recursos

PDF thumbnail3902B Wireless Remote Controller
User Manual · 3902B, 2BC2U-3902B, 2BC2U3902B, 3902_LQ-P562-18, 3902B Wireless Remote Controller, Wireless Remote Controller, Remote Controller, Controller

Referências

Faça uma pergunta

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Faça uma pergunta

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.