Manual do Proprietário
Memória de registro
Assista a este vídeo para saber mais sobre como gravar memórias usando a entrada DMX.
Watch this video to find out about recording memories manually.
Modo Padrão
In standard mode, recording memories allows you to store the current output levels in one of the 12 memories in the dimmer.
The fade time can also be adjusted, if required, during this operation.
It is recommended that when recording memories, the topset level for all channels is set to 100%.
Select the Record Memory option from the Memories menu, and press the ENT key. The screen shows:
Memória de registro
xx
The cursor appears in the memory number field (xx). Unprogrammed memories are indicated by an ‘*’ next to the memory number.
Use the numeric keypad or cursor keys to select the required memory (1 – 12).
Press the ENT key to confirm the memory selection. The screen shows:
Memory: xx
Fade Time: xx
O campo Memória é apenas informativo e não pode ser editado. O cursor aparece no campo Tempo de Fade.
Use the numeric keypad or cursor keys to adjust the fade time as required (1 – 60 seconds).
Press the ENT key to save the fade time to the memory.
The dimmer will then grab the current output levels and store them in the selected memory.
The screen will briefly show a confirmation, and then return to the Record Memory screen.
Modo ChilliNet
In ChilliNet mode, recording memories allows you to store the current output levels in one of the 12 memories in the dimmer. Only the levels of the dimmer channels assigned to the specified area are recorded into the memory.
The fade time can also be adjusted, if required during this operation.
It is recommended that when recording memories, the topset level for all channels is set to 100%.
Select the Record Memory option from the Memories menu, and press the ENT key. The screen shows:
Área: 1
Memory: xx
The cursor is in the Area field. Enter the required area number using the numeric keypad or cursor keys, then press the ENT key. If the area is valid, the cursor moves to the Memory field.
Use the numeric keypad or cursor keys to select the required memory (1 – 12).
Unprogrammed memories have an ‘*’ next to the memory number.
Press the ENT key to confirm the memory selection. The screen shows:
Area xx Mem xx
Fade Time: xx
The Area and Mem fields are for information only. The cursor appears in the Fade Time field.
Use the numeric keypad or cursor keys to adjust the fade time as required (1 – 60 seconds).
Press the ENT key to save the fade time to the memory.
The dimmer will then grab the current output levels for the selected area and store them in the selected memory.
The screen will briefly show a confirmation, and then return to the Record Memory screen.
Documentos / Recursos
 |
Memória de registro zero 88 Chilli Pro [pdf] Manual do Proprietário Memória de registro Chilli Pro, Chilli Pro, memória de registro, memória |